Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Security

UIA

UMTS Integrity Algorithm

Security →

UIA is a set of 3GPP-standardized cryptographic algorithms that ensure integrity of UMTS signaling messages and user data, protect against message modification and replay attacks, and authenticate data origin.

Introduced
Rel-4
Where
Security
Specifications
9 specs
UIA Description Purpose What changed Neighbours Specifications

Description

The UMTS Integrity Algorithm (UIA) is a core security function within the UMTS (Universal Mobile Telecommunications System) and evolved 3GPP networks. It is implemented as part of the security mechanisms in the Access Stratum (AS) and Non-Access Stratum (NAS) protocols. The algorithm operates by generating a Message Authentication Code (MAC), often referred to as an integrity checksum (IK), for each protected message. This MAC is computed using a secret integrity key (IK), a time-variant input (such as a sequence number COUNT-I), a direction bit, the message itself, and a fresh random value (FRESH) generated by the network. The receiving entity recalculates the MAC using the same inputs and compares it with the received MAC; a mismatch indicates a potential integrity violation, and the message is discarded.

The UIA is not a single algorithm but a family of algorithms, with UIA1 and UIA2 being the most prominent. UIA1 is based on the KASUMI block cipher in a specific integrity mode (f9 function), while UIA2 is based on the SNOW 3G stream cipher. The selection of which specific UIA to use is negotiated between the User Equipment (UE) and the network during the security mode setup procedure, allowing for algorithm agility and the ability to introduce new, stronger algorithms over time. The integrity protection is applied to critical control plane signaling (like RRC and NAS messages) and can also be extended to user plane data upon network configuration.

Its operation is tightly integrated with the UMTS Authentication and Key Agreement (AKA) protocol. The AKA procedure establishes the ciphering key (CK) and integrity key (IK) in both the UE and the network. The IK is then used as the primary secret for the UIA. The algorithm's design ensures that even if the same message is sent twice, the generated MAC will be different due to the changing COUNT-I value, effectively preventing replay attacks. The UIA's robustness is fundamental to maintaining user privacy, network reliability, and protection against fraud in 3G and subsequent 3GPP mobile communications.

Purpose & Motivation

The UIA was created to address the security shortcomings of its predecessor, the GSM system, which lacked strong integrity protection for signaling. In GSM, while some encryption existed, it was vulnerable to active attacks where an adversary could modify or replay signaling messages, potentially leading to fraud or service disruption. The primary purpose of the UIA is to provide data integrity and origin authentication for all critical signaling exchanges in UMTS and later networks. This solves the problem of ensuring that control messages (e.g., for call setup, handover, and location updating) are genuine and have not been tampered with during transmission.

The motivation stemmed from the need for a more robust security framework as mobile networks evolved to offer more sophisticated services, including mobile internet and later, IP-based multimedia. The integrity of signaling became paramount for billing, lawful interception, and overall network stability. The UIA, as part of the 3GPP security architecture defined in TS 33.102, established a standardized, cryptographically strong mechanism that could be evaluated and improved over successive releases, providing a foundation for trust in 3GPP networks.

What changed in its specifications

The latest release-to-release comparison of specifications that define UIA. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 23.060Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 23.060: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 23.060 →

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-4 Initial

Introduced as the foundational UMTS Integrity Algorithm, initially based on the KASUMI block cipher (UIA1). It was defined to provide mandatory integrity protection for RRC signaling and was a core part of the new 3G security architecture established in Release 99/4, marking a significant enhancement over GSM security.

Defining Specifications

3GPP specifications that define or reference UIA, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 21.111 vj00 USIM and UICC Requirements for 3G Rel-19 read
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 23.060 vj00 GPRS Stage 2 Service Description Rel-19 read
TS 25.413 vj00 Radio Access Network Application Part (RANAP) Rel-19 read
TS 33.102 vj10 3G Security Architecture Specification Rel-19 read
TS 33.401 vj20 EPS Security Architecture Rel-19 read
TS 33.501 vk30 5G Security Architecture Rel-20 read
TS 33.700 3GPP TR 33.700 Rel-4 read
TS 33.859 vb10 UTRAN Key Hierarchy Study Rel-11 read