5GS

5G System

Core Network →
Introduced in Rel-15 Also in: Services, Management

5GS is the complete 3GPP-defined architecture for 5G networks, encompassing the 5G Core Network and the Next Generation Radio Access Network.

Category
Core Network
Introduced
Rel-15
Where
Core Network › 5G Core
Also touches
2 segments
Specifications
74 specs
5GS Description Purpose Related Classification Detected Changes Specifications

Description

The 5G System (5GS) is the comprehensive architectural framework standardized by 3GPP for fifth-generation cellular networks. It is fundamentally structured around two primary domains: the Next Generation Radio Access Network (NG-RAN) and the 5G Core Network (5GC). The NG-RAN consists of gNBs (next-generation NodeBs) and ng-eNBs (evolved LTE eNBs connected to the 5GC), which handle all radio-related functions, including scheduling, radio resource management, and connectivity to user equipment (UE). The 5GC is a cloud-native, service-based architecture (SBA) where network functions (NFs) are implemented as software services that communicate over a common framework, typically using HTTP/2-based service-based interfaces (SBIs). This represents a radical departure from the monolithic, point-to-point interfaces of previous core networks like the Evolved Packet Core (EPC).

At the heart of the 5GC are key Control Plane and User Plane functions. The Access and Mobility Management Function (AMF) terminates the N1 and N2 interfaces, handling registration, connection, and mobility management, but is deliberately separated from session management. The Session Management Function (SMF) is responsible for session establishment, modification, and release, including IP address allocation and policy enforcement for the User Plane. The User Plane Function (UPF) is the packet gateway and router for the data plane, performing packet inspection, routing, forwarding, and applying quality of service (QoS) rules as dictated by the SMF. The UPF also enables local breakout for edge computing and supports network slicing.

Other critical functions include the Unified Data Management (UDM), which stores subscriber data and authentication credentials, the Authentication Server Function (AUSF) for authentication, and the Policy Control Function (PCF) for policy decisions. The Network Exposure Function (NEF) securely exposes network capabilities to third-party applications. The 5GS architecture is designed for flexibility, enabling network slicing—the creation of multiple logical, isolated networks on a shared physical infrastructure—to serve diverse use cases with different requirements on latency, bandwidth, and reliability. The system operates with a clear separation of the Control and User Planes (CUPS), allowing them to scale independently and be deployed closer to the network edge for low-latency services.

Purpose & Motivation

The 5G System was created to address the limitations of 4G LTE and its Evolved Packet System (EPS), which were primarily optimized for mobile broadband. The exponential growth in connected devices, the demand for ultra-low latency applications (like autonomous vehicles and industrial automation), and the need for massive machine-type communications (mMTC) for IoT rendered the previous architecture insufficient. The EPS's monolithic network functions and rigid, point-to-point interfaces made it difficult to innovate, scale efficiently, or rapidly deploy new services.

The primary motivation for 5GS was to build a future-proof, flexible, and efficient network core. By adopting a cloud-native, service-based architecture, 5GS decouples network functions from proprietary hardware, enabling deployment on commercial off-the-shelf servers and in virtualized/containerized environments. This allows for agile scaling, faster service rollout, and reduced operational costs. Furthermore, the explicit design for network slicing is a direct response to the "one-size-fits-all" nature of previous generations, allowing operators to create tailored logical networks for specific vertical industries (e.g., a separate slice for public safety, factory automation, and enhanced mobile broadband) with guaranteed performance characteristics on a common infrastructure.

Classification

Part of5GC

Release Timeline

Detected Changes Across Releases

from 3GPP Change Requests

Specific changes extracted from the „Change history“ tables of 3GPP specifications (345 CRs across 6 releases). Complements the general historical overview above with the evidence-based evolution of this function.

Rel-15 74 changes

In Release 15, the 5G System (5GS) was newly introduced with foundational capabilities including a Service Based Interface architecture, support for Public Warning System (PWS), and Policy and Charging Control over the Rx interface. It also defined essential interworking and mobility procedures with the Evolved Packet System (EPS), covering areas like mode selection, QoS provision, and the handling of S-NSSAI and PDU session IDs during mobility. Furthermore, the release specified support for features such as 3GPP PS Data Off, tracing in signalling, and enhancements for eCall over IMS within the 5GS framework.

  • Support of PWS in 5GS TS 23.041CR0166
  • Service Based Interface for 5G System TS 23.041CR0174
  • new annex to 23.228 for 5GS support TS 23.228CR1174
  • Adaptation to TS 23.228 due to 5GS TS 23.228CR1175
  • Supporting 3GPP PS Data Off in 5GS TS 23.501CR0141
  • Support of tracing in 5GS signalling: overview TS 23.501CR0474

+ 68 more changes

Rel-16 101 changes

In Release 16, the 5G System introduced several key enhancements for IoT and specialized deployments, including support for Integrated Access and Backhaul (IAB), extended Discontinuous Reception (eDRX), and new optimizations for Control Plane CIoT such as data transfer and stateless IPv6 address autoconfiguration. It also added capabilities for managing Time-Sensitive Networking (TSN) bridges, User Plane optimization, and mechanisms for Service Gap control, back-off control, and inter-RAT mobility involving NB-IoT. Furthermore, the release integrated Common API Framework (CAPIF) for network exposure and provided solutions for external parameters provisioning and NAT support within the 5GS architecture.

  • Integrated CAPIF with 3GPP EPS and 5GS network exposure TS 23.222CR0021
  • 5GS Logical TSN bridge management TS 23.501CR1002
  • Introduction of eDRX in 5GS TS 23.501CR0768
  • Introduction of data transfer in Control Plane CIoT 5GS Optimisation TS 23.501CR0889
  • External parameters provisioning to the 5GS TS 23.501CR0898
  • User Plane Forwarding with Control Plane CIoT 5GS Optimisation TS 23.501CR0916

+ 95 more changes

Rel-17 101 changes

In Release 17, the 5G System introduced several key enhancements including support for Multi-USIM (MUSIM) devices with new procedures for paging, registration, and service requests, and the integration of new radio access technologies like satellite access. It also expanded capabilities for 5G ProSe (Proximity Services), Multimedia Broadcast Service (MBS) via TMGI definition, and dynamic policy updates within the 5G Core architecture. Furthermore, the release provided refinements for mobility and interworking with EPS, including handling areas with only legacy GERAN/UTRAN coverage and improvements for N26 interface interworking.

  • Definition of TMGI for MBS in 5GS TS 23.003CR0617
  • 5G system architecture updates to support Dynamically Changing Policies in the 5GC TS 23.501CR2560
  • Add general 5G ProSe support to 5GS TS 23.501CR2673
  • Support of new RATs in 5GS integrating satellite access TS 23.501CR2781
  • 4G <-> 5GS mobility corrections to cope with areas of GERAN/UTRAN-only coverage TS 23.501CR2970
  • 5GS Connection release support for 5GC/NR TS 23.501CR3088

+ 95 more changes

Rel-18 46 changes

In Release 18, the 5G System introduced several new capabilities, including IPv6 prefix delegation, enhanced support for Service Function Chaining, and 5GS assistance for application AI/ML operations. It also expanded interworking and service continuity with EPS, added new authorization procedures for A2X direct C2 communication, and improved access for UEs behind a 5G-RG via both trusted and untrusted non-3GPP access. Furthermore, enhancements were made to lawful interception during handovers, network slice-specific offline (NSWO) functionality, and location service continuity from 5GS to EPS.

  • Identifier availability for Lawful Interception during Inter-MME/ MME-5GS handover TS 23.401CR3720
  • VAL service over 5GS supporting EPS interworking TS 23.434CR0141
  • PCF support of 5GS Packet Delay Variation monitoring based on QoS monitoring mechanism and exposed to AF TS 23.501CR3792
  • IPv6 prefix delegation in 5GS TS 23.501CR3859
  • Introduction of 5GS Information Exposure TS 23.501CR3887
  • 5GS Assistance for Application AI/ML operation: General clause TS 23.501CR3968

+ 40 more changes

Rel-19 22 changes

In Release 19, the 5G System introduced several new capabilities including support for Mobile Wireless Access Backhaul, enhanced control of UE Radio Access Technology utilization, and the introduction of a no-transmit zone restriction. The release also added a common time reference traceable to UTC for 5GS, prioritized initial paging procedures, and integrated the GMLC into the charging architecture.

  • Adding support of Mobile Wireless Access Backhaul in 5GS TS 23.501CR5596
  • Control of UE RAT utilization by 5GS TS 24.501CR6343
  • List of USS addresses in 5GS TS 24.501CR6450
  • No-transmit zone restriction in 5GS TS 24.501CR6451
  • Initial paging with priority in 5GS TS 24.501CR6948
  • Introduction of GMLC in charging architecture for 5GS TS 32.240CR0491

+ 16 more changes

Rel-20 1 change

In Release 20, a correction was specified for the handling of the PDU Session ID during charging procedures for the V-SMF in EPS-5GS interworking scenarios. This update addressed a specific technical issue within the existing interworking architecture between 4G and 5G systems.

  • Rel-20 CR 32.255 Correction on PDU Session ID Handling for V-SMF Charging in EPS–5GS Interworking TS 32.255CR0622

Explore further

Broader topics and technologies where 5GS plays a role.

Defining Specifications

3GPP specifications that define or reference 5GS, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj00 3GPP Technical Terms and Definitions Rel-19
TR 21.916 vg20 Rel-16 Description Summary Rel-16
TS 23.003 vj50 Numbering, addressing and identification in 3GPP Rel-19
TS 23.041 vj30 Cell Broadcast Service and Public Warning System Rel-19
TS 23.222 vj80 Common API Framework for 3GPP Northbound APIs Rel-19
TS 23.228 vj50 IMS Stage-2 Service Description Rel-19
TS 23.286 vj00 V2X Application Enabler Architecture Rel-19
TS 23.401 vj50 Evolved Packet System (EPS) Stage 2 Description Rel-19
TS 23.434 vk00 Service Enabler Architecture for Verticals Rel-20
TS 23.501 vk00 5G System Architecture Stage 2 Rel-20
TS 23.554 vj70 MSGin5G Service Application Architecture Rel-19
TS 23.632 vj10 5G User Data Interworking and Migration Rel-19
TR 23.732 vg00 User Data Interworking, Coexistence, Migration Study Rel-16
TR 23.745 vh00 Study on App Layer Support for Factories of the Future in 5G Rel-17
TR 23.758 vh00 Study on Edge Application Architecture Rel-17
TR 23.764 vh10 Study on V2X Application Layer Enhancements Rel-17
TR 23.794 vh00 Study on enhanced IMS to 5GC integration Rel-17
TS 23.795 vg10 V2X Application Architecture Study Rel-16
TR 23.973 vj00 Separate HSS/UDM Deployment Scenarios & Solutions Rel-19
TS 24.229 vj50 IMS call control protocol based on SIP and SDP Rel-19
TS 24.301 vj60 NAS protocol for Evolved Packet System Rel-19
TS 24.483 vj20 Mission Critical Services Management Object Rel-19
TS 24.484 vj30 MCS Configuration Management Rel-19
TS 24.501 vj50 5G NAS Protocols Specification Rel-19
TS 24.502 vj20 5G Core Access via Non-3GPP Networks; Stage 3 Rel-19
TS 24.519 vh10 TSN AF to DS-TT/NW-TT Protocol Aspects Rel-17
TS 24.526 vj30 UE Policies for 5GS; Stage 3 Rel-19
TS 24.535 vj00 TS 24535: (g)PTP Message Delivery Protocol Rel-19
TS 24.539 vj30 NW-TT Protocol Aspects Rel-19
TS 24.571 vj20 Control Plane LCS Procedures Rel-19
TS 24.623 vj00 XCAP Protocol for Supplementary Services Rel-19
TS 24.890 vg00 5G NAS Protocol for 5GS Stage 3 Rel-16
TS 26.501 vj30 5G Media Streaming (5GMS) Architecture Rel-19
TS 26.847 vj00 AI/ML Evaluation in 5G Media Services Rel-19
TR 26.927 vj00 AI/ML in 5G Media Services Study Rel-19
TS 27.007 vj40 AT Command Set for UE Rel-19
TS 28.203 vi10 Charging management Rel-18
TS 28.204 vi11 Charging management Rel-18
TS 28.540 vk10 5G Network Resource Model (NRM) Management Rel-20
TS 28.707 vj00 EPC NRM IRP Requirements Rel-19
TR 28.816 vh00 Charging for 5G Cellular IoT Rel-17
TR 28.839 vi10 Technical Report Rel-18
TR 28.840 vi10 Technical Report Rel-18
TS 28.849 vj10 CAPIF Phase2 Charging Study Rel-19
TS 29.165 vj10 Inter-IMS Network to Network Interface (NNI) Rel-19
TS 29.214 vj20 Policy and Charging Control over Rx Rel-19
TS 29.507 vj40 5G Access & Mobility Policy Control Service Rel-19
TS 29.518 vj50 AMF Service Based Interface Protocol Rel-19
TS 29.549 vj40 SEAL API Specification for Vertical Applications Rel-19
TS 29.585 vj00 TSN Interworking Protocol for 5G System Rel-19
TS 31.111 vj30 USIM Application Toolkit (USAT) Specification Rel-19
TS 32.240 vj40 Charging Management Architecture & Principles Rel-19
TS 32.255 vk10 Telecom Management; Charging for 5G Data Connectivity Rel-20
TS 32.256 vj40 5G Connection & Mobility Charging Spec Rel-19
TS 32.260 vj10 IMS Charging Management Rel-19
TS 32.274 vj10 SMS Charging Management Specification Rel-19
TS 32.279 vj00 5G MBS Session Converged Charging Rel-19
TS 32.282 vi20 Charging management; Time Sensitive Networking Rel-18
TS 32.290 vj50 5G Charging for Service Based Interface Rel-19
TS 32.298 vj30 Charging Data Record (CDR) Parameter Specification Rel-19
TS 32.299 vj00 Diameter Charging Applications for 3GPP Rel-19
TS 32.404 vj00 Performance Management Definitions & Template Rel-19
TR 32.846 vh00 Charging for ProSe in 5GS Rel-17
TS 33.127 vj50 Lawful Interception Architecture and Functions Rel-19
TS 33.514 vk00 5G Security Assurance for UDM Rel-20
TS 33.545 vj20 Security for NR Femto Subsystem Rel-19
TS 33.814 vg01 Security aspects of enhanced Location Services (eLCS) Rel-16
TS 33.835 vg10 Study on authentication and key management for apps Rel-16
TR 33.851 vh10 Security for Industrial IoT in 5G Rel-17
TS 38.171 vj10 5G A-GNSS UE Positioning Requirements Rel-19
TS 38.300 vj00 NG-RAN Overall Description Rel-19
TS 38.305 vj00 NG-RAN UE Positioning Stage 2 Rel-19
TS 38.508 vj11 5G NR UE Radio Transmission & Reception Rel-19
TS 38.522 vj11 UE Conformance Test Applicability Statement Rel-19
Patrick Zandl

About the author: Patrick Zandl (b. 1974)

Telecommunications specialist, technology journalist (founder of the Mobil server), and developer who has been running since 2025 — the largest Czech-language resource on AI-assisted programming. Formerly Chief Wizard Architect at Prusa3D and head of development for Turris at CZ.NIC; currently a consultant and instructor on AI implementation in companies.