Description
The Adaptive Multi-Rate Wideband (AMR-WB) speech codec is a sophisticated audio compression algorithm designed specifically for mobile telecommunications. Unlike traditional narrowband codecs that operate with 8 kHz sampling (covering 300-3400 Hz), AMR-WB uses 16 kHz sampling to capture frequencies from 50 Hz to 7 kHz. This expanded frequency range provides significantly improved speech quality, naturalness, and intelligibility, making conversations sound more lifelike and reducing listener fatigue. The codec employs Algebraic Code Excited Linear Prediction (ACELP) technology with multi-rate operation, allowing it to adapt to varying channel conditions while maintaining optimal voice quality.
AMR-WB operates with nine different bit rates ranging from 6.60 kbit/s to 23.85 kbit/s, with the most commonly used rates being 12.65 kbit/s and 23.85 kbit/s. The codec uses a frame length of 20 milliseconds, corresponding to 320 samples at 16 kHz sampling rate. Each frame is divided into four subframes of 5 ms each for more efficient processing. The encoder analyzes the speech signal using linear prediction analysis to extract spectral parameters (Line Spectral Frequencies), pitch parameters (adaptive codebook), and innovation parameters (fixed codebook). These parameters are quantized and transmitted to the decoder, which reconstructs the speech signal using synthesis filtering.
The codec's architecture includes several key components: the pre-processing module for high-pass filtering and signal scaling, the linear prediction analysis module for spectral envelope estimation, the open-loop pitch analysis for initial pitch estimation, and the closed-loop pitch search for refined pitch parameters. The innovation codebook search uses algebraic codebooks with pulse positions and signs optimized for efficient encoding. The decoder performs the inverse operations, including parameter decoding, excitation generation, and synthesis filtering to reconstruct the speech signal. Post-processing includes adaptive post-filtering to enhance the perceptual quality of the reconstructed speech.
AMR-WB incorporates sophisticated voice activity detection (VAD) and comfort noise generation (CNG) mechanisms for efficient discontinuous transmission during silence periods. The codec supports multiple operational modes including full-rate, half-rate, and variable-rate operation depending on network conditions. It includes robust error concealment techniques to handle frame losses and transmission errors, ensuring graceful degradation of voice quality under poor channel conditions. The codec's design emphasizes both compression efficiency and computational complexity optimization, making it suitable for implementation on mobile devices with limited processing power and battery life.
In 3GPP networks, AMR-WB is integrated into the media processing chain of voice services, interfacing with transport protocols like RTP/UDP/IP for packet-switched voice. The codec supports transcoding-free operation in end-to-end scenarios when both terminals support AMR-WB, preserving the full wideband quality throughout the call path. It has been extended with enhanced versions like AMR-WB+ for music and general audio, and EVS-WB which provides even better quality and efficiency. AMR-WB's widespread adoption across mobile generations from 3G to 5G demonstrates its fundamental role in delivering high-quality voice services in modern telecommunications.
Purpose & Motivation
AMR-WB was developed to address the limitations of narrowband speech codecs that had dominated mobile communications since the early days of cellular networks. Traditional narrowband codecs like AMR-NB (Adaptive Multi-Rate Narrowband) operated within the 300-3400 Hz frequency range, which was sufficient for basic intelligibility but lacked the naturalness and richness of face-to-face conversation. This frequency limitation resulted in muffled speech, reduced intelligibility of certain consonants (especially fricatives like 's', 'f', and 'th'), and overall listener fatigue during extended conversations. The telecommunications industry recognized that improved voice quality could enhance user experience, reduce miscommunication, and provide competitive differentiation in increasingly saturated mobile markets.
The development of AMR-WB was motivated by several key factors: the availability of increased processing power in mobile devices, improved network bandwidth capabilities, and growing consumer expectations for better audio quality. Research in psychoacoustics had demonstrated that human speech contains important information in frequencies beyond the traditional telephone band, particularly in the 50-300 Hz range (providing natural bass and vocal warmth) and the 3400-7000 Hz range (enhancing consonant clarity and speech intelligibility). By extending the frequency range to 50-7000 Hz, AMR-WB could capture these important spectral components, resulting in speech that sounds more natural, less strained, and more similar to in-person conversation.
Another important motivation was the need for a standardized wideband codec that could work across different network technologies and service providers. Prior to AMR-WB standardization, various proprietary wideband codecs existed, but they suffered from interoperability issues. 3GPP's standardization ensured that AMR-WB could be implemented consistently across devices and networks, facilitating global roaming and service continuity. The codec was designed to be backward compatible with existing network infrastructure while providing a clear migration path for operators to enhance their voice services. Its adaptive multi-rate capability allowed it to maintain good quality even under challenging radio conditions, making it suitable for the variable channel quality characteristic of mobile networks.
What changed in its specifications
The latest release-to-release comparison of specifications that define AMR-WB. Each summary describes the whole specification, not only this term.
Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TR 21.905 →EVS Codec Extension for Immersive Voice and Audio Services adds handling procedures and references for the IVAS speech codec.
Full comparison in TS 23.333 →Technology family
Speech and voice codecs · Services › Codecs
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Release Timeline
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 12 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
TS 26.114 first appears in Rel-7 with MTSI requirements for AMR-WB: SDP offers must include an AMR-WB payload type when wideband speech is offered, with defined parameter settings.
- “If wideband speech is also offered then the SDP offer shall also include at least one RTP payload type for AMR-WB” TS 26.114 v7.17.0
- “For AMR or AMR-WB encoded media, the session setup shall determine what RTP profile to use” TS 26.114 v7.17.0
TS 26.114 Rel-8 adds MTSI MGW requirements for AMR-WB: avoiding transcoding, supporting AMR-WB payload SDP parameters, restricting mode changes, and handling congestion adaptation via RTCP APP and CMR.
- “The MTSI MGW shall support the following payload SDP parameters for AMR and AMR-WB: octet-align, mode-set, mode-change-period” TS 26.114 v8.15.0
- “If the MTSI MGW is performing transcoding of AMR or AMR-WB then it shall be capable of restricting mode changes” TS 26.114 v8.15.0
- “then transcoding shall be avoided whenever possible. In this case, the MTSI MGW should not be included in the RTP path.” TS 26.114 v8.15.0
In TS 26.114 for Rel-9, MTSI handling of AMR and AMR-WB changed: the initial codec mode wait is no longer fixed at 600 ms, and the MTSI MGW may now be included in the RTP path for non-transcoding purposes.
- “the MTSI client in terminal should limit the initial codec mode (ICM) to one of the lowest codec modes for an Initial Waiting Time from the beginning of the RTP stream” TS 26.114 v9.15.0
- “the MTSI MGW should not be included in the RTP path unless it is required for non transcoding related purposes” TS 26.114 v9.15.0
- “ECN can also be used for AMR-WB in a corresponding way” TS 26.114 v9.15.0
MTSI spec TS 26.114 added AMR-WB rules for b=AS bandwidth computation, preferred mode-set, SDP mode-set handling and QoS mapping tables, in addition to AMR-NB.
- “the MTSI client shall set the b=AS parameter to a value matching the maximum codec mode in the mode-set” TS 26.114 v10.11.0
- “for AMR-WB it is {12.65, 8.85 and 6.60}” TS 26.114 v10.11.0
- “the MTSI client shall set the b=AS parameter in the SDP to a value matching the highest AMR/AMR-WB mode” TS 26.114 v10.11.0
In MTSI (TS 26.114), the recommendation to mainly use the AMR-WB {12.65, 8.85, 6.60} mode subset is now justified by GERAN/UTRAN usage and bit-rate granularity, and a section on recommending AMR/AMR-WB mode subsets was added.
- “it is desirable to mainly use the codec modes from the AMR-WB {12.65, 8.85 and 6.60} mode set” TS 26.114 v11.12.0
- “Reasons for Recommending a Subset of AMR/AMR-WB Codec Modes” TS 26.114 v11.12.0
MTSI client and gateway requirements for AMR-WB were extended to cover EVS AMR-WB IO mode interoperability, with the EVS AMR-WB IO mode allowed as an alternative implementation of AMR-WB.
- “When the EVS codec is supported, the EVS AMR-WB IO mode may serve as an alternative implementation of AMR-WB” TS 26.114 v12.17.0
- “Frames generated by an EVS AMR-WB IO mode encoder can be decoded by an AMR-WB decoder, without the need for transcoding.” TS 26.114 v12.17.0
- “If the IMS-ALG expects that interworking between AMR-WB and EVS is required” TS 23.334 v12.13.0
MTSI client requirements for AMR-WB changed: session setup now determines applicable bandwidths, new 'a=bw-info' bandwidth property recommendations for AMR-WB were added, and CMR handling rules were revised.
- “Table 6.10-2: Recommended bandwidth properties for AMR-WB to be used with the ‘a=bw-info’ attribute when codec modes up to 12.65 are negotiated” TS 26.114 v13.11.0
- “For AMR and AMR-WB, the MTSI client shall accept that the remote party sends with lower modes within the negotiated mode-set than requested by the CMR.” TS 26.114 v13.11.0
- “The originating MTSI client must set the Maximum Supported Bandwidth and the Maximum Desired Bandwidth properties for AMR-WB to higher values” TS 26.114 v13.11.0
TS 26.114 added CMR=15 handling for AMR-WB and rules for translating CMR between AMR-WB and EVS AMR-WB IO, including the case where transcoder-free operation is not possible.
- “For AMR-WB, CMR=15 overrides the previously received CMR value (corresponding to a speech mode or CMR=15).” TS 26.114 v15.8.0
- “When translating a single frame per packet from AMR-WB to EVS (AMR-WB IO): CMR=15 shall be replaced by the highest possible” TS 26.114 v15.8.0
AMR-WB floating-point reference code received a correction for 64-bit systems, and TS 26.114 added AMR-WB-related text on DTX SID interval interworking with EVS AMR-WB IO and new AMR-WB code points and PLR tables.
- Corrections to AMR-WB floating-point for 64-bit systems TS 26.204CR0020
- “The DTX operation of AMR-WB is defined with a fixed interval of 8 frames for SID updates.” TS 26.114 v16.13.0
- “Table W.3.2: Code points for AMR-WB” TS 26.114 v16.13.0
The AMR-WB fixed-point codec reference implementation received a saturation correction in Rel-17, with matching test vector updates; MTSI specs also gained AMR-WB test cases for 5GS.
AMR-WB IO mode is now specified as part of the IVAS codec, with new MTSI SDP offer/answer rules and IMS-ALG interworking procedures between AMR-WB and IVAS using AMR-WB IO mode.
- “including functions for backwards compatibility with EVS and AMR-WB interoperable mode as described above” TS 26.114 v18.13.0
- “shall in the SDP answer include parameters for immersive audio, EVS Primary mode and EVS AMR-WB IO mode according to Table 6.7.” TS 26.114 v18.13.0
- “If the IMS-ALG decides that the IVAS codec using AMR-WB IO mode is selected, the IMS-ALG shall either include the mode-change-capability parameter with value 2” TS 23.334 v18.1.0
Defining Specifications
3GPP specifications that define or reference AMR-WB, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TR 21.905 vj20 | 3GPP Terminology and Definitions | Rel-19 read |
| TS 22.813 va00 | Enhanced Voice Services for EPS | Rel-10 read |
| TS 23.333 vj00 | MRFC-MRFP Mp Interface Requirements | Rel-19 read |
| TS 23.334 vj00 | IMS-ALG to IMS-AGW Interface (Iq) Stage 2 | Rel-19 read |
| TS 26.111 vj00 | 3G-324M Terminal Specification for CS Multimedia | Rel-19 read |
| TS 26.114 vk11 | IMS Multimedia Telephony Client | Rel-20 read |
| TS 26.171 vj00 | Introduction to AMR-WB Speech Processing | Rel-19 read |
| TS 26.173 vj00 | AMR-WB Codec ANSI-C Implementation | Rel-19 read |
| TS 26.177 vj00 | DSR Extended Advanced Front-end Test Sequences | Rel-19 read |
| TS 26.179 vj00 | Codecs and Media Handling for MCPTT | Rel-19 read |
| TS 26.190 vj00 | AMR-WB Speech Codec Detailed Mapping | Rel-19 read |
| TS 26.191 vj00 | AMR-WB Error Concealment Procedure | Rel-19 read |
| TS 26.192 vj00 | AMR-WB Comfort Noise Requirements | Rel-19 read |
| TS 26.204 vj00 | AMR-WB Floating-Point Codec Specification | Rel-19 read |
| TS 26.244 vj10 | 3GPP File Format (3GP) Specification | Rel-19 read |
| TS 26.252 vj20 | Digital Test Sequences for IVAS Codec and Related Functions | Rel-19 read |
| TS 26.256 vj10 | IVAS Jitter Buffer Management Specification | Rel-19 read |
| TS 26.290 vj00 | AMR-WB+ Audio Codec Specification | Rel-19 read |
| TS 26.441 vj00 | EVS Audio Processing Introduction | Rel-19 read |
| TS 26.442 vj00 | EVS Codec Fixed Point ANSI-C Code | Rel-19 read |
| TS 26.443 vj00 | EVS Codec Floating-Point C Code | Rel-19 read |
| TS 26.444 vj01 | EVS Codec Test Sequences | Rel-19 read |
| TS 26.446 vj00 | EVS Codec AMR-WB Backward Compatibility Spec | Rel-19 read |
| TS 26.447 vj00 | EVS Frame Loss Concealment Procedure | Rel-19 read |
| TS 26.448 vj00 | EVS Jitter Buffer Management Specification | Rel-19 read |
| TS 26.450 vj00 | EVS Codec DTX System Level Aspects | Rel-19 read |
| TS 26.451 vj00 | EVS Codec Voice Activity Detector (VAD) Specification | Rel-19 read |
| TS 26.452 vj00 | EVS Codec Fixed-Point C Code Implementation | Rel-19 read |
| TS 26.453 vj00 | EVS Codec Generic Frame Format for 3G CS Networks | Rel-19 read |
| TS 26.511 vj00 | 5G Media Streaming Profiles, Codecs & Formats | Rel-19 read |
| TR 26.916 ve20 | eSRVCC Transcoding Minimization Study | Rel-14 read |
| TR 26.923 vj00 | Study on IMS-based Telepresence Media Handling | Rel-19 read |
| TR 26.935 vj00 | Speech Codec Performance for Packet Switched Multimedia | Rel-19 read |
| TR 26.937 vj00 | 3GPP PSS Characterization | Rel-19 read |
| TR 26.943 vj00 | SES Codec Selection Report | Rel-19 read |
| TR 26.952 vj00 | EVS Codec Selection, Verification & Characterization | Rel-19 read |
| TR 26.969 vj00 | eCall In-band Modem Performance Characterization | Rel-19 read |
| TR 26.976 vj00 | AMR-WB Codec Characterization & Verification | Rel-19 read |
| TS 29.163 vj00 | Interworking between 3GPP IM CN and CS networks | Rel-19 read |
| TS 36.750 ve10 | Study on enhancement of VoLTE | Rel-14 read |
| TS 45.009 vj00 | GSM AMR Link Adaptation & Control | Rel-19 read |