Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Antenna gain

Antenna gain

Physical Layer →

Antenna gain is the ratio of radiation intensity in a given direction to that of an isotropic radiator, expressed in dBi, quantifying how much an antenna focuses energy and impacting link budget, coverage, and beamforming design in 5G NR.

Introduced
Rel-15
Where
Radio Access Network › Multi-RAT
Specifications
3 specs
Antenna gain Description Purpose What changed Neighbours Specifications

Description

Antenna gain is a fundamental figure of merit in radio engineering and a key parameter in 3GPP specifications for 5G NR base stations and user equipment. Formally, it is defined as the ratio of the radiation intensity in a given direction to the radiation intensity that would be obtained if the power accepted by the antenna were radiated isotropically. This ratio is typically expressed in decibels relative to an isotropic radiator (dBi). In 3GPP documents such as TR 37.843 (multi-antenna transmission and reception), TR 37.941 (RF conformance testing), and TR 38.817 (NR radio frequency aspects), antenna gain is used to characterise both the passive antenna element patterns and the composite radiation patterns of active antenna systems (AAS).

In the context of 5G NR, antenna gain plays a central role in the design of massive MIMO and beamforming systems. A base station antenna array consists of many radiating elements; the overall gain of the array is the product of the element gain and the array factor, which depends on the number of elements, their spacing, and the phase and amplitude weights applied. By steering the beam toward a user, the array can achieve high gain in the desired direction while suppressing interference elsewhere. 3GPP models these effects in link-level and system-level simulations, and RF requirements such as conducted and radiated power, error vector magnitude (EVM), and adjacent channel leakage ratio (ACLR) are defined with reference to antenna gain and beam patterns.

Antenna gain is also critical for link budget calculations. The received power in a communication link is proportional to the product of the transmit antenna gain, the receive antenna gain, and the path loss. Higher gain allows either extended coverage or reduced transmit power, which is especially important for mmWave frequencies where path loss is severe. In 3GPP specifications, antenna gain patterns are used to define reference antenna models for testing and to derive requirements for user equipment (UE) and base station (BS) radiated performance. For example, TR 37.941 defines test methods for active antenna systems, where the gain pattern must be measured under specific conditions.

Furthermore, antenna gain is a parameter in the 3GPP channel models (e.g., TR 38.901) used for evaluating system performance. The channel model incorporates antenna element patterns and gains to accurately simulate spatial channel characteristics. In beam management procedures, the UE and gNB measure reference signals to select beams with the highest gain, ensuring robust connectivity. The concept also appears in spectrum sharing and interference coordination, where antenna gain patterns determine the spatial isolation between cells and systems.

In summary, antenna gain is a foundational concept that bridges physical antenna design and network-level performance. It is used throughout 3GPP specifications to define RF requirements, model channel behaviour, and ensure interoperability. Understanding antenna gain is essential for engineers designing 5G networks, as it directly affects coverage, capacity, and the effectiveness of advanced antenna techniques.

Purpose & Motivation

Antenna gain exists as a concept to quantify the directional performance of antennas, enabling engineers to predict and optimise radio link performance. Before the formalisation of antenna gain, antenna design was largely empirical, and system planning lacked a common metric to compare different antennas. The isotropic radiator provides a theoretical reference, and gain relative to it (dBi) allows standardised comparison. In 3GPP, the need for precise definitions arose with the introduction of advanced antenna systems and mmWave frequencies, where beamforming and spatial processing are essential. The definition ensures consistent interpretation across specifications, facilitating conformance testing and interoperability. It also supports the development of channel models and RF requirements that are critical for global deployment of 5G.

What changed in its specifications

The latest release-to-release comparison of specifications that define Antenna gain. Each summary describes the whole specification, not only this term.

TR 37.941Rel-15 → Rel-16

Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.

Full comparison in TR 37.941 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced in 3GPP specifications for 5G NR, providing the formal ratio of radiation intensity in a given direction to that of an isotropic radiator. This definition supported the design of massive MIMO and beamforming at mmWave frequencies.

The definition text carried over unchanged from Rel-15, continuing to serve as the basis for antenna gain characterisation in NR enhancements.

The definition remained unchanged, maintaining consistency for ongoing NR feature development and testing.

The definition was unchanged, ensuring stable reference for 5G-Advanced evolution.

The definition carried over unchanged, continuing to support antenna gain specifications for future releases.

Defining Specifications

3GPP specifications that define or reference Antenna gain, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TR 37.941 vj20 RF Conformance Testing Background for Radiated BS Requirements Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-15 read