Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Radiation pattern

Radiation pattern

Physical Layer →

Radiation pattern is the angular distribution of a radiated electromagnetic field or power level in the far field, describing how an antenna radiates energy into space.

Introduced
Rel-11
Where
Radio Access Network › Multi-RAT
Specifications
6 specs
Radiation pattern Description Purpose What changed Neighbours Specifications

Description

The radiation pattern is a fundamental concept in antenna theory and 3GPP specifications, defined as the angular distribution of the radiated electromagnetic field or power level in the far field region. It provides a mathematical and graphical representation of how an antenna radiates or receives electromagnetic energy as a function of direction. In the context of 3GPP, the radiation pattern is used to characterize the performance of base station and user equipment antennas, and it is essential for link budget calculations, interference analysis, and network planning.

A radiation pattern is typically represented in two principal planes: the azimuth plane (horizontal) and the elevation plane (vertical). It is often normalized to the maximum radiation intensity and expressed in decibels (dB). Key parameters derived from the radiation pattern include the half-power beamwidth (HPBW), which is the angular width of the main beam where the radiated power is at least half of its maximum; the sidelobe level, which indicates the level of unwanted radiation outside the main beam; and the front-to-back ratio, which is the ratio of power radiated in the forward direction to that in the backward direction. These parameters are critical for ensuring coverage and minimizing interference in cellular networks.

The radiation pattern of an antenna is determined by its physical design and the current distribution on its radiating elements. For a single radiating element, the pattern is relatively broad, but when multiple elements are combined into an array, the overall pattern becomes the product of the element pattern and the array factor. This allows for the synthesis of highly directional beams, which is the basis for beamforming in advanced antenna systems. In 3GPP specifications, the radiation pattern is used to define the spatial characteristics of antenna arrays for both LTE and NR, including the modeling of antenna gains for system-level simulations.

The term was introduced in Rel-11 as part of the specifications for Active Antenna Systems (AAS), where accurate modeling of radiation patterns became crucial for evaluating the performance of 3D beamforming and MIMO. The 3GPP specifications (e.g., TS 37.840, 37.842, 37.843, 37.941, 38.817, 38.877) provide detailed methods for measuring and specifying radiation patterns, including the use of anechoic chambers and near-field to far-field transformations. The radiation pattern is also used in the definition of antenna models for system-level simulations, such as the 3GPP TR 36.873 and TR 38.901 channel models, where the antenna pattern is a key input for evaluating network performance.

In 5G NR, the radiation pattern concept extends to massive MIMO and millimeter-wave systems, where the patterns of individual elements and arrays are used to design beam management procedures. The radiation pattern is also important for regulatory compliance, as it determines the effective isotropic radiated power (EIRP) and the potential for interference with other systems. Understanding radiation patterns is therefore essential for engineers involved in antenna design, network planning, and standardization.

Purpose & Motivation

The radiation pattern concept exists to provide a standardized way to describe and quantify the directional characteristics of antennas. In cellular networks, the radiation pattern determines how signals are distributed in space, which directly affects coverage, capacity, and interference. By defining the radiation pattern in 3GPP specifications, engineers can compare different antenna designs, predict network performance, and ensure that antennas meet regulatory requirements.

The motivation for formalizing the radiation pattern in 3GPP became particularly strong with the introduction of Active Antenna Systems (AAS) and 3D beamforming in Rel-11. Traditional antennas had fixed patterns, but AAS allows dynamic control of the pattern, requiring accurate models for simulation and testing. The radiation pattern is also essential for the development of beamforming algorithms, as it defines the spatial response of the antenna array to different excitation weights.

Furthermore, the radiation pattern is a key input for system-level simulations and network planning tools. It allows operators to predict coverage and interference, and to optimize antenna tilting and azimuth orientation. The standardized definitions and measurement methods in 3GPP ensure that results are consistent and comparable across vendors and operators. Without a clear definition of the radiation pattern, the specification of antenna performance and the evaluation of advanced antenna technologies would be ambiguous and unreliable.

What changed in its specifications

The latest release-to-release comparison of specifications that define Radiation pattern. Each summary describes the whole specification, not only this term.

TR 37.941Rel-15 → Rel-16

Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.

Full comparison in TR 37.941 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-11 Initial

The term was introduced in Rel-11 as part of the AAS specifications, defined as the angular distribution of the radiated electromagnetic field in the far field region. This provided a basis for characterizing antenna patterns in advanced antenna systems.

The definition was revised to include 'or power level' in addition to 'electromagnetic field', broadening the scope to explicitly cover power-based descriptions. The wording changed from 'the angular distribution of the radiated electromagnetic field in the far field region' to 'the angular distribution of the radiated electromagnetic field or power level in the far field region'.

The definition carried over unchanged from Rel-12, maintaining the inclusion of power level in the description.

The definition remained unchanged, continuing to use the Rel-12 wording.

The definition carried over unchanged, supporting 5G NR antenna specifications.

The definition remained unchanged, with no modifications to the technical content.

The definition carried over unchanged, maintaining consistency across releases.

The definition remained unchanged, continuing to be the reference definition for radiation patterns.

The definition carried over unchanged, with no revisions to the wording or scope.

Defining Specifications

3GPP specifications that define or reference Radiation pattern, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.840 vc10 RF & EMC Requirements for Active Antenna Systems Rel-12 read
TS 37.842 vd30 AAS Base Station RF Requirements Study Rel-13 read
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TR 37.941 vj20 RF Conformance Testing Background for Radiated BS Requirements Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-11 read
TR 38.877 vi10 Technical Report Rel-18 read