Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

Radiating element

Radiating element

Physical Layer →

Radiating element is a basic building block of an antenna array element, characterized by its radiation properties, and the fundamental unit from which multi-element antenna arrays are constructed in 3GPP base station and UE antenna systems.

Introduced
Rel-11
Where
Radio Access Network › Multi-RAT
Specifications
6 specs
Radiating element Description Purpose What changed Neighbours Specifications

Description

A radiating element is defined in 3GPP specifications as the basic building block of an array element characterized by its radiation properties. It represents the smallest individually identifiable radiating structure within an antenna system, and it serves as the fundamental unit from which more complex antenna arrays are constructed. In the context of 3GPP antenna standards, the radiating element is the physical structure that converts guided electromagnetic waves into radiated waves (and vice versa), and its radiation characteristics—such as gain, pattern, polarization, and impedance—determine the overall performance of the antenna array.

The concept of the radiating element is central to the specification of multi-antenna systems, particularly for MIMO (Multiple-Input Multiple-Output) and beamforming technologies introduced in LTE and NR. An array element, as defined in 3GPP, is a combination of one or more radiating elements that are fed together to produce a desired radiation pattern. The radiating element itself is the individual radiator, and its properties are characterized by its radiation pattern, which describes the angular distribution of radiated power in the far field. The 3GPP specifications (e.g., TS 37.840, 37.842, 37.843, 37.941, 38.817, 38.877) provide detailed requirements and test methods for base station antennas, including the characterization of radiating elements and arrays.

In practice, a radiating element can take various forms, such as a dipole, patch, slot, or horn, depending on the frequency band and application. For cellular base stations, patch antennas and dipole arrays are common. The radiating element's design determines key parameters like half-power beamwidth, sidelobe levels, cross-polarization discrimination, and front-to-back ratio. When multiple radiating elements are combined into an array, the overall radiation pattern is determined by the element pattern multiplied by the array factor, which depends on the geometry and excitation of the elements. This principle is fundamental to beamforming, where the phase and amplitude of signals fed to each element are adjusted to steer the beam.

The introduction of the term in Rel-11 coincided with the growing importance of advanced antenna systems (AAS) and 3D beamforming in LTE. The 3GPP specifications for AAS (e.g., TS 37.840) define the radiating element as the basic building block, enabling the characterization of active antenna systems where the radio and antenna are integrated. This definition allows manufacturers and operators to specify and test antenna arrays in a modular way, separating the performance of individual elements from the array-level performance. The term is used in conformance testing, where the radiation properties of the element must be verified to ensure the overall array meets regulatory and performance requirements.

In the context of 5G NR, the radiating element concept extends to massive MIMO systems, where arrays with dozens or hundreds of elements are used to support high-gain beamforming and spatial multiplexing. The 3GPP specifications for NR (e.g., TS 38.817) continue to rely on the radiating element as the fundamental unit for defining antenna characteristics. Understanding the radiating element is therefore essential for engineers designing and testing antenna systems, as it provides the basis for predicting array performance and ensuring compliance with 3GPP standards.

Purpose & Motivation

The concept of the radiating element exists to provide a standardized, modular way to describe and characterize antenna systems in 3GPP specifications. Before its formal definition, antenna performance was often specified at the array level, making it difficult to compare different designs or to isolate the performance of individual components. By defining the radiating element as the basic building block, 3GPP enabled a clear separation between element-level and array-level characteristics, which is crucial for the design, testing, and certification of advanced antenna systems.

The motivation for this definition became particularly strong with the advent of Active Antenna Systems (AAS) in Rel-11, where the antenna and radio units are integrated and the number of elements can be large. AAS and later massive MIMO require precise control of the radiation pattern of each element to achieve beamforming and spatial multiplexing. Standardizing the radiating element allows manufacturers to specify the performance of individual elements and ensures that arrays built from them meet the overall system requirements. It also facilitates the development of test methods for conformance and performance testing, as described in specifications like TS 37.842 and TS 37.843.

Furthermore, the radiating element concept supports the evolution towards higher frequency bands (e.g., mmWave) where antenna arrays are typically built from many small elements. It provides a common vocabulary for engineers, regulators, and operators to discuss antenna characteristics and to ensure interoperability and regulatory compliance. Without this foundational concept, the specification of complex antenna systems would be ambiguous and difficult to enforce.

What changed in its specifications

The latest release-to-release comparison of specifications that define Radiating element. Each summary describes the whole specification, not only this term.

TR 37.941Rel-15 → Rel-16

Extended OTA BS testing to 43.5–48.2 GHz; added new measurement/uncertainty clauses; revised procedures.

Full comparison in TR 37.941 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-11 Initial

The term was introduced in Rel-11 as part of the specifications for Active Antenna Systems (AAS), defining the radiating element as the basic building block of an array element characterized by its radiation properties. This provided a foundation for characterizing advanced antenna systems in LTE.

The definition carried over unchanged from Rel-11, maintaining the same wording and technical meaning.

The definition remained unchanged, continuing to serve as the fundamental building block definition for antenna arrays.

The definition carried over unchanged, with no modifications to the wording or scope.

The definition remained unchanged, supporting the ongoing development of 5G NR antenna systems.

The definition carried over unchanged, continuing to be used in specifications for NR and LTE antenna testing.

The definition remained unchanged, with no revisions to the technical content.

The definition carried over unchanged, maintaining consistency across releases.

The definition remained unchanged, continuing to be the reference definition for radiating elements in 3GPP specifications.

Defining Specifications

3GPP specifications that define or reference Radiating element, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.840 vc10 RF & EMC Requirements for Active Antenna Systems Rel-12 read
TS 37.842 vd30 AAS Base Station RF Requirements Study Rel-13 read
TR 37.843 vf70 AAS BS Radiated RF Requirement Background Rel-15 read
TR 37.941 vj20 RF Conformance Testing Background for Radiated BS Requirements Rel-19 read
TS 38.817 3GPP TR 38.817 Rel-11 read
TR 38.877 vi10 Technical Report Rel-18 read