Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

DBT

Discovery Burst Transmission

Radio Access Network →

DBT is a Rel-16 NR mechanism, specified in 38.133 and 38.533 measurement and RRM test specifications, in which a UE transmits discovery signals in short bursts to enable efficient sidelink device-to-device discovery and measurement.

Introduced
Rel-16
Where
User Equipment
Specifications
2 specs
DBT Description Purpose What changed Neighbours Specifications

Description

Discovery Burst Transmission (DBT) is a radio access network concept introduced in 3GPP Release 16 for New Radio (NR) sidelink operation. It defines how a user equipment (UE) transmits discovery-related signals in a burst pattern rather than continuously, so that neighbouring UEs can detect and measure the transmitting device while the transmitter conserves energy and reduces interference. DBT is closely tied to the NR sidelink framework that was standardised in Rel-16 for V2X and public safety use cases, where devices must discover one another without relying on a central base station for every transmission.

Architecturally, DBT operates at the physical and MAC layers of the NR sidelink. A UE configured for discovery transmits a burst of discovery signals within a defined time window, using configured sidelink resources. The burst structure allows receiving UEs to perform measurements such as discovery signal received power and discovery signal received quality, which are used for link selection, relay selection, and proximity detection. Because the transmission is bursty, the network can schedule discovery occasions that avoid conflicts with data transmissions and can align discovery activity across multiple UEs.

The measurement and radio resource management (RRM) requirements for DBT are captured in 3GPP TS 38.133, which specifies the core requirements for NR, and TS 38.533, which defines the corresponding RRM conformance test cases. These specifications define the accuracy, timing, and reporting requirements that a UE must meet when measuring discovery burst transmissions, ensuring interoperability between devices from different vendors. The test specifications verify that a UE can correctly detect and measure DBT signals under defined channel conditions.

DBT plays an important role in enabling energy-efficient discovery. Continuous discovery transmission would drain battery and create unnecessary uplink interference; burst transmission concentrates the discovery energy into short windows, allowing the receiver to use narrow measurement gaps and the transmitter to sleep between bursts. This is particularly valuable for wearable and IoT-adjacent devices, and for vehicular UEs that need to discover peers quickly while managing power.

In the broader network, DBT supports use cases such as sidelink relay discovery, where a remote UE discovers a relay UE to extend coverage, and V2X proximity services, where vehicles discover nearby vehicles and pedestrians. It complements the sidelink control and data channels by providing a dedicated, measurable discovery signal that higher layers can use for association decisions.

Purpose & Motivation

DBT exists to solve the problem of efficient device discovery in NR sidelink networks. Before Rel-16, LTE sidelink discovery relied on relatively rigid patterns and did not scale well to the flexible numerology and wide bandwidths of NR. Continuous discovery transmission was wasteful of UE power and spectrum, and it created interference that degraded data transmissions. DBT was created to provide a structured, burst-based discovery mechanism that could be measured reliably and scheduled flexibly.

The mechanism also addresses the need for standardised measurement requirements. Without defined RRM requirements, different vendors could implement discovery detection with wildly different sensitivity and timing, making multi-vendor sidelink operation unreliable. By specifying DBT measurement behaviour in TS 38.133 and testing it in TS 38.533, 3GPP ensured that discovery performance is predictable and testable.

Finally, DBT supports the broader 5G goal of direct device-to-device communication for V2X, public safety, and relay scenarios. It gives the network a tool to balance discovery latency against power consumption, which is essential for battery-constrained devices and for dense vehicular environments where many devices must discover each other simultaneously.

What changed in its specifications

The latest release-to-release comparison of specifications that define DBT. Each summary describes the whole specification, not only this term.

TS 38.133Rel-18 → Rel-19

Rel-19 adds low band carrier aggregation via switching and low-power wake-up receiver (LP-WUR) requirements to TS 38.133. It also adds ATG network support, intra-band non-collocated NR-CA receiver types, and multi-carrier BWP switch and SCell activation delay requirements.

Full comparison in TS 38.133 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-16 Initial

DBT was introduced as part of the initial NR sidelink framework, defining burst-based discovery transmission and its associated measurement and RRM requirements in TS 38.133 and TS 38.533.

The term carried over unchanged; Rel-17 work on sidelink enhancements did not alter the core DBT definition.

The term carried over unchanged; Rel-18 sidelink evolution work did not revise the DBT definition.

The term carried over unchanged; no definitional change to DBT was recorded.

The term carried over unchanged; no definitional change to DBT was recorded.

Defining Specifications

3GPP specifications that define or reference DBT, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.133 vk10 NR Radio Resource Management Requirements Rel-20 read
TS 38.533 vj40 NR UE RRM Conformance Testing Rel-19 read