Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Sidelink

Sidelink

Radio Access Network →

Sidelink is the direct device-to-device radio interface, known as PC5, enabling communication and services like V2X without using the network infrastructure.

Introduced
Rel-12
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
3 specs
Sidelink Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Sidelink is the 3GPP-defined direct radio interface between User Equipment (UE) that allows devices to communicate with each other without routing user data through the base station or core network. It is standardised as the PC5 interface and is specified across both LTE (E-UTRA) and NR (New Radio) access technologies. The interface supports three main families of functionality: sidelink communication (unicast, groupcast and broadcast data transfer between UEs), sidelink discovery (procedures by which a UE discovers nearby UEs or services), and V2X sidelink communication (vehicular communication for safety, traffic efficiency and automated driving use cases). Sidelink operates in dedicated or shared spectrum, and can be used both in-coverage (under network control) and out-of-coverage (autonomous operation), which is essential for public safety and disaster scenarios where infrastructure may be unavailable.

Architecturally, sidelink sits at the radio access level but interacts with the core network for authorisation, provisioning and policy. In LTE, sidelink resource allocation is controlled by the eNB through either scheduled (Mode 1) or UE-autonomous (Mode 2) resource selection. In NR, sidelink introduces more advanced designs: Mode 1 (network-scheduled) and Mode 2 (UE-autonomous) resource allocation, a flexible numerology, a physical sidelink control channel (PSCCH), physical sidelink shared channel (PSSCH), physical sidelink feedback channel (PSFCH) for HARQ feedback, and a sidelink synchronisation signal (SLSS) with a physical sidelink broadcast channel (PSBCH). NR sidelink also supports unicast and groupcast with PC5-RRC signalling, beamforming, and quality-of-service (QoS) management through PC5 5QI (PQI).

The protocol stack for sidelink mirrors the Uu interface but is adapted for direct communication. At the physical layer, sidelink uses SC-FDMA in LTE and CP-OFDM/DFT-s-OFDM in NR. Above the physical layer, the MAC layer handles scheduling, multiplexing and HARQ, the RLC layer provides segmentation and reassembly, and the PDCP layer handles ciphering and integrity protection. For NR sidelink, a PC5-RRC protocol was introduced to support unicast link establishment, capability exchange and radio link management. The sidelink also defines a PC5-S signalling protocol for link establishment, security and discovery procedures.

Sidelink is central to several 3GPP service enablers. In public safety (MCPTT, MCVideo, MCData), it provides off-network direct communication when coverage is lost. In V2X, it enables vehicles to exchange CAM/DENM messages directly, supporting cooperative awareness and collision avoidance. In Rel-16 and beyond, NR sidelink is being extended to support advanced V2X (eV2X), industrial IoT, and even relay and positioning use cases. Rel-17 and Rel-18 further enhance sidelink with features such as sidelink relay, power saving, and improved resource allocation for reduced capability devices.

From a network perspective, sidelink reduces latency and offloads traffic from the Uu interface, while enabling new proximity-based services. It requires careful coordination with the Uu interface to avoid interference and to manage resource pools. The core network, through the PCF and UDM, provides authorisation and policy for sidelink usage, and the NG-RAN configures sidelink resource pools and parameters via broadcast or dedicated signalling. Overall, sidelink represents a fundamental shift from purely network-centric communication to direct device-to-device interaction, and it continues to evolve as a key enabler for 5G-Advanced and 6G use cases.

Purpose & Motivation

Sidelink was created to enable direct communication between devices without relying on network infrastructure. Before its introduction, all UE-to-UE communication had to traverse the base station and core network, which introduced latency, consumed network resources, and failed entirely when coverage was unavailable. Public safety organisations needed a way for first responders to communicate in disaster zones where cellular infrastructure might be damaged or congested. Similarly, vehicular communication required low-latency, high-reliability message exchange between nearby vehicles, which is difficult to guarantee through the network alone.

Sidelink addresses these limitations by providing a direct radio path between UEs, known as the PC5 interface. It allows devices to discover each other and exchange data even when out of network coverage, using pre-configured resource pools and synchronisation procedures. This makes it ideal for mission-critical push-to-talk, V2X safety applications, and emerging use cases like industrial automation and extended reality. By offloading traffic from the Uu interface, sidelink also improves spectral efficiency and reduces core network load.

The evolution from LTE sidelink to NR sidelink reflects the growing demand for higher data rates, lower latency, and more advanced topologies. NR sidelink introduces unicast and groupcast with feedback, beamforming, and QoS differentiation, enabling a broader range of services beyond basic broadcast. As 5G-Advanced and 6G evolve, sidelink is expected to play a central role in device-to-device, vehicle-to-everything, and even integrated sensing and communication scenarios.

What changed in its specifications

The latest release-to-release comparison of specifications that define Sidelink. Each summary describes the whole specification, not only this term.

TS 36.302Rel-12 → Rel-13

Rel-13 added BL/enhanced-coverage exclusions, modulation limits, and new downlink reception types for MTC, plus SC-PTM downlink channel combinations and UE capability requirements.

Full comparison in TS 36.302 →
TS 36.321Rel-18 → Rel-19

Rel-19 adds to TS 36.321 a contention-based Msg3 early data transmission (CB-Msg3-EDT) procedure, along with new definitions and abbreviations. This is the only feature overview provided, so no other additions can be named.

Full comparison in TS 36.321 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 8 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-12 introduced

Sidelink is defined for the first time in TS 36.321 as the UE-to-UE PC5 interface for sidelink communication and discovery, with new sidelink channels, SCI and SC period.

  • “Sidelink: UE to UE interface for sidelink communication and sidelink discovery. The sidelink corresponds to the PC5 interface as defined in [13].” TS 36.321 v12.10.0
  • “The Sidelink Control Information contains the sidelink scheduling information such as resource block assignment, modulation and coding scheme and Group Destination ID [5].” TS 36.321 v12.10.0
  • “- Sidelink Shared Channel (SL-SCH).” TS 36.321 v12.10.0
Rel-13 1 CR

MAC specification adds Sidelink Discovery Gap for Reception and Transmission definitions and their effect on random access, HARQ, scheduling request and PDCCH monitoring procedures.

  • “Time period during which the UE prioritizes transmission of sidelink discovery and associated procedures e.g. re-tuning and synchronisation over transmission of channels in UL” TS 36.321 v13.9.0
  • “if Sidelink Discovery Gaps for Transmission are configured by upper layers, and there is no measurement gap at the time of the transmission” TS 36.321 v13.9.0
  • Correction to Sidelink Discovery Gap for Transmission TS 36.321CR0901
Rel-14 specification text

Sidelink in MAC was extended to cover V2X sidelink communication over PC5, adding SL-V-RNTI, PPPP in SCI and prioritization of V2X sidelink transmissions over uplink transmissions.

  • “Sidelink: UE to UE interface for sidelink communication, sidelink discovery and V2X sidelink communication.” TS 36.321 v14.13.0
  • “Group Destination ID (for sidelink communication) and PPPP (for V2X sidelink communication)” TS 36.321 v14.13.0
  • “SL-V-RNTI Sidelink V2X RNTI” TS 36.321 v14.13.0
Rel-15 2 CRs

Rel-15 MAC sidelink procedures changed: sidelink grant handling now covers multi-carrier V2X transmission, with carrier (re)selection ordered by logical channel priority, plus clarified sidelink booking and PDCP duplication.

  • “determine the order of the (re-)selected carriers, according to the decreasing order based on the highest priority of logical channels which are allowed on each (re-)selected carrier” TS 36.321 v15.11.0
  • Clarification to TX Carrier (re)-Selection for V2X Sidelink Communication TS 36.321CR1397
  • Clarification to Sidelink Booking Processes TS 36.321CR1230
Rel-16 1 CR

NR sidelink (5G V2X over PC5) was introduced in Rel-16, including MAC sidelink grant handling referencing TS 38.331 and new NR sidelink test cases.

  • “Introduction of 5G V2X with NR Sidelink” TS 36.321 v16.9.0
  • “Addition of new NR V2X Sidelink radio link failure / Transmission side test case” TS 38.523-1 v16.14.0
  • Correction the NR Sidelink AMBR in ASN.1 definition TS 36.413CR1787
Rel-17 3 CRs

Rel-17 introduces NR Sidelink enhancements and Sidelink Relay (L2 U2N), including new capabilities, relay procedures over Xn and F1AP, and related sidelink test cases.

  • Introduction of NR Sidelink enhancements TS 38.214CR0235
  • Introduction of Sidelink Relay over Xn TS 38.423CR0693
  • (Stage-2 F1AP CR) support for NR Sidelink Relay TS 38.470CR0085
Rel-18 3 CRs

Rel-18 extends sidelink with NR sidelink relay enhancements, Sidelink Positioning support in the LCS architecture, and corrections to sidelink resource allocation mode 2 and sidelink measurements.

  • Introduce Sidelink positioning procedure into LCS architecture TS 23.273CR0297
  • Support for NR Sidelink Relay Enhancements TS 38.413CR0928
  • Correction to Sidelink resource allocation mode 2 TS 38.214CR0568
Rel-19 2 CRs

Sidelink gained new specified behaviour in Rel-19: NR sidelink operation in shared spectrum with channel access procedures, plus new sidelink positioning and ranging charging.

  • “Sidelink supports operation in shared spectrum for both mode 1 and mode 2 for ProSe use case only.” TS 38.523-1 v19.6.0
  • Add procedure for exposing Sidelink ranging information TS 23.434CR0338
  • Introduction of Ranging and Sidelink Positioning Charging TS 32.271CR0019

Defining Specifications

3GPP specifications that define or reference Sidelink, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.302 vj00 E-UTRA Physical Layer Services Rel-19 read
TS 36.321 vj30 E-UTRA MAC Protocol Specification Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read