Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

ProSe UE-to-Network Relay

Proximity Services User Equipment-to-Network Relay

Services →

ProSe UE-to-Network Relay is a user equipment that acts as a relay to extend network coverage to remote UEs, enabling them to connect to the network via its connection for public safety and IoT.

Introduced
Rel-13
Where
Services
Specifications
3 specs
ProSe UE-to-Network Relay Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The ProSe UE-to-Network Relay is a key entity in the 3GPP Proximity Services (ProSe) architecture, defined to extend network coverage to User Equipments (UEs) that are out of coverage or experiencing poor signal quality. Introduced in Release 13, this relay functionality allows a UE that has a stable connection to the network (the relay UE) to provide connectivity to one or more remote UEs that are in its proximity but cannot directly communicate with the network. This is particularly important for public safety operations, where first responders may need to communicate from areas with no cellular coverage, such as inside buildings, tunnels, or remote locations. The relay UE essentially acts as a Layer 3 router, forwarding data between the remote UEs and the network.

Architecturally, the ProSe UE-to-Network Relay operates using the PC5 interface for communication with remote UEs and the Uu interface for communication with the network. The relay UE must be authorized by the network to perform relay operations, and it must have a subscription that allows relay services. The remote UE discovers the relay UE either through direct discovery (using ProSe discovery procedures) or by using a pre-configured relay selection policy. Once connected, the remote UE sends its data to the relay UE over the PC5 interface, and the relay UE forwards it to the network over the Uu interface. Similarly, downlink data from the network is forwarded by the relay UE to the remote UE. The relay UE may also perform IP address assignment and other network functions for the remote UE, effectively acting as a gateway.

Key components of the ProSe UE-to-Network Relay architecture include the ProSe Function, which authorizes and provisions the relay UE, and the ProSe Application Server, which may manage relay selection policies. The relay UE itself must support the necessary protocols for relaying, including IP routing and possibly NAT (Network Address Translation) if the remote UE uses a private IP address. The remote UE must support ProSe discovery and communication procedures to connect to the relay. Security is a critical aspect: the relay UE must authenticate the remote UE and ensure that only authorized UEs can use the relay service. Additionally, the communication between the remote UE and the network may be secured end-to-end or hop-by-hop, depending on the deployment scenario.

The operation of the ProSe UE-to-Network Relay involves several procedures: relay discovery, where the relay UE advertises its presence and the remote UE discovers it; connection establishment, where the remote UE establishes a PC5 connection with the relay UE; and data forwarding, where the relay UE forwards user data between the remote UE and the network. The relay UE may also support mobility, allowing the remote UE to switch to another relay UE or to direct network connection as it moves. The 3GPP specifications 23.303, 23.468, and 36.300 define the architecture, procedures, and radio aspects of the ProSe UE-to-Network Relay, respectively.

The ProSe UE-to-Network Relay is a vital enabler for extending network coverage and providing connectivity in challenging environments. It is particularly useful for public safety, where it allows first responders to maintain communication even when they are out of direct network coverage. It also has applications in commercial scenarios, such as extending coverage in rural areas, providing connectivity for IoT devices, and enabling vehicle-to-everything (V2X) communication. As 3GPP evolves towards 5G, the relay functionality continues to be enhanced, with improvements in efficiency, security, and support for new services.

Purpose & Motivation

The ProSe UE-to-Network Relay was created to address the problem of limited network coverage, particularly in scenarios where direct communication with the network is not possible due to physical obstructions, distance, or network outages. In public safety operations, first responders often need to communicate from inside buildings, basements, tunnels, or remote areas where cellular coverage is weak or non-existent. Traditional solutions, such as deploying portable base stations or using satellite communication, are expensive, complex, and may not be readily available. The ProSe UE-to-Network Relay provides a cost-effective and flexible solution by leveraging the proximity of UEs to extend coverage. A UE with good network connectivity can act as a relay for other UEs in its vicinity, effectively creating a local coverage extension.

The motivation for the relay also stems from the need to support group communication and data services for remote UEs. In public safety, it is not enough to have voice communication; first responders need to share video, images, and sensor data. The relay enables remote UEs to access the full range of network services, including IP-based applications, by providing a transparent IP connection. This is achieved by the relay UE acting as a router, forwarding IP packets between the remote UE and the network. The relay also helps in conserving energy for remote UEs, as they can use lower power to communicate with the relay UE over the PC5 interface rather than transmitting directly to a distant base station.

Furthermore, the ProSe UE-to-Network Relay supports the evolution towards 5G and the Internet of Things (IoT), where massive numbers of devices may require connectivity. The relay can serve as a gateway for IoT devices, aggregating their traffic and reducing the load on the network. It also enables new use cases such as wearable devices that may not have cellular modems, allowing them to connect via a smartphone relay. The relay functionality has been enhanced over releases to support more efficient discovery, better security, and integration with network slicing and edge computing. Overall, the ProSe UE-to-Network Relay is a key technology for extending coverage, improving resilience, and enabling new services in both public safety and commercial domains.

What changed in its specifications

The latest release-to-release comparison of specifications that define ProSe UE-to-Network Relay. Each summary describes the whole specification, not only this term.

TS 23.303Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 23.303: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 23.303 →
TS 23.468Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 23.468: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 23.468 →

Technology family

Mission-critical services · Services

  1. Rel-12 GCS AS, GCSE_LTE, ProSe
  2. Rel-13 IOPS, MCPTT, ProSe UE-to-Network Relay
  3. Rel-14 MCData, MCVideo, MCX common functional architecture

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • ProSe UE-to-Network Relay counterpart in another generation: 5G ProSe UE-to-Network Relay
    “5G ProSe UE-to-Network Relay: A 5G ProSe-enabled UE that provides functionality to support connectivity to the network for 5G ProSe Remote UE(s).” TS 23.304

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 6 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-13 introduced

ProSe UE-to-Network Relay is specified for the first time, with layer-3 forwarding of IP traffic, Relay Service Codes, discovery, PDN connection setup and eNB-controlled relay operation.

  • “The ProSe UE-to-Network Relay shall relay unicast traffic (UL and DL) between the Remote UE and the network.” TS 23.303 v13.6.0
  • “ProSe UE-to-Network Relay: a UE that provides functionality to support connectivity to the network for Remote UE(s).” TS 36.300 v13.14.0
  • “Procedures to act as a ProSe UE-to-Network Relay. The Remote UE communicates with the ProSe UE-to-Network Relay over PC5 reference point.” TS 23.303 v13.6.0
Rel-14 1 CR

A change request for TS 23.303 corrects or adds behaviour for EPS bearer release in the ProSe UE-to-Network Relay.

  • EPS bearer release for ProSe UE-to-Network Relay TS 23.303CR0321
Rel-17 specification text

5G ProSe UE-to-Network Relay is specified for the first time in Rel-17, with discovery using Relay Service Codes, slice and congestion handling, and control-plane and user-plane security procedures.

  • “parameter identifying a connectivity service the 5G ProSe UE-to-Network Relay provides to a 5G ProSe Remote UE.” TS 23.304 v17.8.0
  • “There are two security mechanism options for 5G ProSe UE-to-Network Relay: security procedure over User Plane as defined in clause 6.3.3.2” TS 33.503 v17.10.0
  • “The 5G ProSe UE-to-Network Relay may be subject to NAS level congestion control” TS 23.304 v17.8.0
Rel-18 1 CR

In Rel-18 the 5G ProSe UE-to-Network Relay gained support for relaying emergency services and Public Warning Notifications, with new security handling for emergency relay and rules on registration and advertisement.

  • “the 5G ProSe UE-to-Network Relay shall use RRC establishment cause "emergency".” TS 23.304 v18.8.0
  • Support of Public Warning Notification Relaying by 5G ProSe UE-to-Network Relay TS 23.304CR0141
Rel-19 specification text

Rel-19 extends 5G ProSe UE-to-Network Relay to Layer-2 and Layer-3 multi-hop communication via Intermediate UE-to-Network Relays, with new discovery and path-selection behaviour and security support.

  • “5G ProSe UE-to-Network Relay enables indirect Layer-2 and Layer-3 single-hop communication and Layer-2 and Layer-3 Multi-hop communication” TS 23.304 v19.6.0
  • “To support Multi-hop UE-to-Network Relay discovery, the 5G ProSe UE-to-Network Relay sets the Hop-Count to 1” TS 23.304 v19.6.0
  • “The 5G ProSe UE-to-Network Relay security includes the security aspects for single-hop and multi-hop scenarios for both Layer-2 and Layer-3” TS 33.503 v19.3.0
Rel-20 specification text

The 5G ProSe Layer-3 UE-to-Network Relay's advertisement of the serving-cell 5GS TAI in discovery now also assists slice-based N3IWF selection, not only N3IWF selection.

  • “To assist the 5G ProSe Layer-3 Remote UE with N3IWF selection or slice-based N3IWF selection” TS 23.304 v20.1.0

Defining Specifications

3GPP specifications that define or reference ProSe UE-to-Network Relay, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.303 vj00 Proximity Services (ProSe) Stage 2 Rel-19 read
TS 23.468 vj00 Group Communication System Enablers for LTE Rel-19 read
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read