Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

5G ProSe Direct Communication

5G Proximity Services Direct Communication

Services →

5G ProSe Direct Communication is a function enabling direct device-to-device connectivity between nearby 5G-enabled user equipment using NR technology, without the data traversing network nodes, for public safety, commercial, and industrial use cases.

Introduced
Rel-17
Where
Services
Specifications
3 specs
5G ProSe Direct Communication Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

5G ProSe Direct Communication is a function defined in 3GPP TS 23.304 that supports communications between two or more UEs in proximity that are 5G ProSe-enabled. The communication uses user-plane transmission based on NR technology via a path that does not traverse any network node. In other words, the data flows directly over the radio interface between the participating UEs, using the PC5 reference point, rather than being routed through the gNB and core network. This is the 5G evolution of the Proximity Services (ProSe) concept originally introduced in LTE Rel-12/13.

Architecturally, 5G ProSe Direct Communication operates over the PC5 interface, which is the direct sidelink interface between UEs. The UEs must first be authorized for ProSe direct communication, which involves subscription checks in the UDM and policy provisioning from the PCF. The 5G ProSe layer is organized into several functional entities: the 5G ProSe Direct Discovery function, the 5G ProSe Direct Communication function, the 5G ProSe UE-to-Network Relay function, and the 5G ProSe UE-to-UE Relay function. Direct Communication specifically handles the establishment, maintenance, and release of sidelink data paths between UEs.

The operation of 5G ProSe Direct Communication involves several steps. First, UEs perform authorization and provisioning, obtaining ProSe policies that define whether they may communicate directly, under what conditions (e.g., whether they are served by the network or out of coverage), and with what QoS parameters. Second, the UEs discover each other, either through 5G ProSe Direct Discovery or through a pre-configured arrangement. Third, a direct link is established over PC5, with radio resource management handled either by the gNB (in-coverage, network-scheduled mode) or autonomously by the UEs (out-of-coverage, UE-autonomous mode). Fourth, user-plane data is exchanged directly between the UEs. The 5G ProSe layer supports both unicast and groupcast communication modes.

Key technical aspects include the use of NR sidelink (as specified in TS 38.300 and TS 38.331) for the radio interface, QoS management for sidelink bearers, and security procedures for direct communication (covered in TS 33.304). The 5G ProSe Direct Communication function also interacts with the 5G ProSe Direct Discovery function, since discovery is typically a prerequisite for communication. Management aspects are covered in TS 28.853 and TS 32.277, which define how ProSe services are managed and charged.

5G ProSe Direct Communication is important because it enables low-latency, high-reliability communication without infrastructure dependency. It is particularly valuable for public safety (e.g., police and firefighter communication when network coverage is unavailable), commercial applications (e.g., proximity-based social networking, local content sharing), and industrial IoT (e.g., machine-to-machine communication on a factory floor). By leveraging NR sidelink, it benefits from the higher data rates, lower latency, and improved reliability of 5G compared to LTE ProSe.

Purpose & Motivation

5G ProSe Direct Communication exists to provide reliable, low-latency device-to-device connectivity that does not depend on network infrastructure. Traditional cellular communication always routes user data through the base station and core network, which introduces latency, consumes network resources, and fails when coverage is unavailable. For many use cases — particularly public safety and mission-critical communications — this dependency is unacceptable. First responders need to communicate in basements, tunnels, or disaster areas where network infrastructure may be damaged or absent.

The concept originated with LTE ProSe in Rel-12/13, which introduced direct discovery and communication over the PC5 interface using LTE sidelink. However, LTE ProSe had limitations: lower data rates, limited QoS support, and a design optimized primarily for public safety. As 5G NR matured, it became possible to define a more capable ProSe framework leveraging NR sidelink, which offers wider bandwidths, flexible numerology, beamforming, and enhanced reliability.

5G ProSe Direct Communication addresses these limitations by providing a 5G-native direct communication capability. It supports higher throughput, better QoS differentiation, and integration with 5G core network functions such as the PCF and UDM for authorization and policy control. It also extends the scope beyond public safety to commercial and industrial applications, reflecting the broader 5G vision of connecting everything. The Rel-19 specification consolidates these capabilities into a coherent 5G ProSe architecture, and Rel-20 continues to refine and maintain the definition.

What changed in its specifications

The latest release-to-release comparison of specifications that define 5G ProSe Direct Communication. Each summary describes the whole specification, not only this term.

TS 23.304Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink relaying through Intermediate UE-to-Network Relay entities, with discovery, QoS and link handling clauses. It also adds path switching between direct and indirect paths via Layer-2 UE-to-Network Relay, and ProSe support for SNPNs and CAG use in PNI-NPNs.

Full comparison in TS 23.304 →
TS 24.554Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink UE-to-network relay with new direct link establishment procedures and discovery IEs. It extends 5G ProSe to SNPNs, adding SNPN identification, authorisation checks, and PC5 relay indications. It also adds multi-hop relay configuration over PC5 and charging-related abbreviations and content type values.

Full comparison in TS 24.554 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • 5G ProSe Direct Communication counterpart in another generation: ProSe Direct Communication
    “5G ProSe features consist of: 5G ProSe Direct Discovery, 5G ProSe Direct Communication, 5G ProSe UE-to-Network Relay, 5G ProSe UE-to-UE Relay and 5G ProSe Intermediate UE-to-Network Relay.” TS 23.304

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-17 introduced

5G ProSe Direct Communication is defined and specified for the first time in Rel-17: direct NR-based UE-to-UE communication over PC5 with unicast, broadcast and groupcast modes, plus its security and charging.

  • “A communication between two or more UEs in proximity that are 5G ProSe-enabled, by means of user plane transmission using NR technology via a path not traversing any network node.” TS 23.304 v17.8.0
  • “Procedures for 5G ProSe Direct Communication over PC5 reference point, including Broadcast, Groupcast and Unicast mode 5G ProSe Direct Communication.” TS 23.304 v17.8.0
  • “Unicast mode 5G ProSe Direct Communication is used by two UEs that directly exchange traffic for the ProSe applications running between the peer UEs.” TS 33.503 v17.10.0
Rel-18 specification text

Rel-18 extends 5G ProSe Direct Communication to cover communication via 5G ProSe Layer-3 and Layer-2 UE-to-UE Relay, with related provisioning and Layer-2 ID rules.

  • “5G ProSe Direct Communication via 5G ProSe Layer-3 UE-to-UE Relay as specified in clause 6.7.1, for the communication between 5G ProSe Layer-3 End UEs” TS 23.304 v18.8.0
  • “5G ProSe Direct Communication via 5G ProSe Layer-2 UE-to-UE Relay as specified in clause 6.7.2, for the communication between 5G ProSe Layer-2 End UEs” TS 23.304 v18.8.0
Rel-19 2 CRs

Rel-19 extends 5G ProSe Direct Communication specifications: provisioning and PC5 text now cover multi-hop relays, and lawful interception (LI) for Direct Communication is added in stage 2 and stage 3.

  • LI for 5G ProSe Direct Communication - Stage 3 TS 33.128CR0721
  • LI for 5G ProSe Direct Communication - Stage 2 TS 33.127CR0273
  • “the security procedure for unicast mode 5G ProSe Direct Communication specified in clause 6.2 is reused with the following modifications:” TS 33.503 v19.3.0

Defining Specifications

3GPP specifications that define or reference 5G ProSe Direct Communication, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.304 vk10 5G Proximity Services (ProSe) Stage 2 Rel-20 read
TS 24.554 vk10 5G ProSe Protocols and Procedures Rel-20 read
TS 32.277 vj20 Charging Management for Proximity Services (ProSe) Rel-19 read