Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

5G ProSe Remote UE

5G Proximity Services Remote User Equipment

Services →

5G ProSe Remote UE is a 5G ProSe-enabled user equipment that communicates with a Data Network indirectly through one or more 5G ProSe relays for coverage extension and group communication.

Introduced
Rel-17
Where
Core Network › 5G Core
Specifications
2 specs
5G ProSe Remote UE Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The 5G ProSe Remote UE is a fundamental element in the 3GPP Release 19 architecture for proximity-based services (ProSe), which enables direct device-to-device (D2D) and relay-based communication. A Remote UE is a user device (such as a smartphone, IoT module, or wearable) that supports 5G ProSe and can connect to a Data Network (DN) not directly through the cellular network but via a chain of relays. Specifically, it communicates with the DN via zero or more 5G ProSe Intermediate UE-to-Network Relays and at least one 5G ProSe UE-to-Network Relay. The term 'zero or more' indicates that a single-hop relay is possible, or multiple hops can be used to extend range further. This architecture is particularly valuable in scenarios where direct network coverage is unavailable or unreliable, such as in disaster zones, remote rural areas, or within buildings.

The Remote UE operates using direct PC5 sidelink communication with the relay UEs. It discovers available relays either through network-controlled discovery or autonomous discovery, depending on its registration and coverage status. Once connected to a relay, it can exchange user data with the DN, and it may also participate in group communications. The Remote UE must maintain a ProSe context and perform authentication and authorization with the network, even when out of coverage, if it has a valid subscription and can reach the network via the relay. The architecture supports mobility of the Remote UE, including handover between relays and between relay and direct network access, ensuring service continuity.

Key functions of the Remote UE include: relay discovery and selection, establishment and maintenance of PC5 links, IP address management (either IPv4, IPv6, or IPv4v6), and support for various services such as IP data, Ethernet, or unstructured data. It also handles security procedures, including authentication and encryption of the sidelink communication. The Remote UE can be in one of several states: in-coverage, out-of-coverage, or partial coverage. In the latter two cases, it relies on the relay to reach the network for control plane and user plane traffic.

The Remote UE interacts with the 5G core network (5GC) through the relay, which acts as a transparent IP router or a Layer-3 relay. The 5G ProSe UE-to-Network Relay encapsulates the Remote UE's traffic and forwards it to the UPF (User Plane Function) in the 5GC. From the network's perspective, the Remote UE may be identified by a ProSe subscription identifier and can be subject to specific QoS policies and charging. This allows operators to manage and monetize relayed traffic appropriately.

In 3GPP Release 19, the Remote UE definition was introduced as part of the enhanced ProSe architecture for 5G, standardized in TS 23.304, with management aspects in TS 32.277. Release 20 continues to refine the concept, ensuring interoperability and addressing new use cases like public safety and commercial proximity services.

Purpose & Motivation

The 5G ProSe Remote UE exists to extend network coverage and enable communication for devices that cannot directly connect to the 5G core network. This is crucial for public safety, disaster relief, and commercial applications where infrastructure may be damaged or absent. Historically, devices out of coverage could not communicate with the network, limiting critical services. The Remote UE, via relays, solves this by allowing indirect connectivity, thereby ensuring service availability and reliability. It also supports group communication for public safety users, allowing them to stay connected even when network coverage is lost, which is a key requirement in mission-critical scenarios.

What changed in its specifications

The latest release-to-release comparison of specifications that define 5G ProSe Remote UE. Each summary describes the whole specification, not only this term.

TS 23.304Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink relaying through Intermediate UE-to-Network Relay entities, with discovery, QoS and link handling clauses. It also adds path switching between direct and indirect paths via Layer-2 UE-to-Network Relay, and ProSe support for SNPNs and CAG use in PNI-NPNs.

Full comparison in TS 23.304 →
TS 32.277Rel-18 → Rel-19

Proximity-based Services in 5GS Phase 3 adds a new clause for ProSe Layer-3 UE-to-UE relay message flows, including multi-hop scenarios, and new fields for hop count, target End UE IP address, intermediate relay information, and PC5 QoS flow identifier with timestamps.

Full comparison in TS 32.277 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • 5G ProSe Remote UE counterpart in another generation: Remote UE
    “5G ProSe Remote UE: A 5G ProSe-enabled UE that communicates with a DN via zero or more 5G ProSe Intermediate UE-to-Network Relay(s) and a 5G ProSe UE-to-Network Relay.” TS 23.304

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-17 introduced

5G ProSe Remote UE is defined for the first time as a 5G ProSe-enabled UE communicating with a DN via a 5G ProSe UE-to-Network Relay, with discovery, PC5 security and key procedures specified.

  • “5G ProSe Remote UE: A 5G ProSe-enabled UE that communicates with a DN via a 5G ProSe UE-to-Network Relay.” TS 23.304 v17.8.0
  • “The 5G ProSe Remote UE shall establish a different PC5 security context with each different 5G ProSe UE-to-Network Relay and for each different Relay Service Code.” TS 33.503 v17.10.0
  • “The 5G ProSe Remote UE sends a UP-PRUK Request message to its 5G PKMF.” TS 33.503 v17.10.0
Rel-18 specification text

Rel-18 extends 5G ProSe Remote UE with emergency service support via UE-to-Network Relay, path switching between relays, and receiving broadcast warning messages without a relay connection, plus revised security key handling.

  • “5.4.4 Support of emergency service from 5G ProSe Remote UE via 5G ProSe UE-to-Network Relay” TS 23.304 v18.8.0
  • “A 5G ProSe Remote UE can receive the broadcasted warning message without establishing a connection to the 5G ProSe UE-to-Network Relay.” TS 23.304 v18.8.0
  • “the 5G ProSe Remote UE shall accept NULL ciphering and NULL integrity algorithms indicated in Direct Security Mode Command message” TS 33.503 v18.6.0
Rel-19 1 CR

In Rel-19 the 5G ProSe Remote UE gains multi-hop relay behaviour: it determines a Hop-Limit, discovers and selects Intermediate UE-to-Network Relays, and reselects relays when the path fails, with matching security procedures.

  • “The 5G ProSe Remote UE determines the Hop-Limit for discovery based on policy configuration (i.e. a mapping between maximum number of hops and RSC) or QoS requirements.” TS 23.304 v19.6.0
  • “The 5G ProSe Remote UE performs a multi-hop UE-to-Network Relay discovery with Model B procedure with the Intermediate UE-to-Network Relay and 5G ProSe UE-to-Network Relay.” TS 33.503 v19.3.0
  • Clarification on Relay reselection for 5G ProSe Remote UE with 5G ProSe Multi-hop UE-to-Network Relays TS 23.304CR0549

Defining Specifications

3GPP specifications that define or reference 5G ProSe Remote UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.304 vk10 5G Proximity Services (ProSe) Stage 2 Rel-20 read
TS 32.277 vj20 Charging Management for Proximity Services (ProSe) Rel-19 read