Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

5G ProSe UE-to-UE Relay

5G Proximity Services User Equipment-to-User Equipment Relay

Services →

5G ProSe UE-to-UE Relay is a function in a 5G ProSe-enabled device that acts as a direct relay between two other 5G ProSe end devices to extend coverage and support group communication.

Introduced
Rel-18
Where
Core Network › 5G Core
Specifications
2 specs
5G ProSe UE-to-UE Relay Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The 5G ProSe UE-to-UE Relay is a key enabler in the 3GPP Release 19 ProSe architecture for direct communication between User Equipment (UEs) without going through the network. It is a function implemented in a 5G ProSe-enabled UE that relays traffic between two other 5G ProSe end UEs (or Remote UEs) over the PC5 sidelink interface. Unlike the UE-to-Network Relay, which connects a Remote UE to the network, the UE-to-UE Relay facilitates communication between two UEs that may be out of direct PC5 range of each other. This effectively extends the range of sidelink communication and enables multi-hop device-to-device connectivity. The relay function can be integrated into any ProSe-enabled UE, allowing it to act as a relay for other UEs while also serving its own applications.

The UE-to-UE Relay operates by establishing PC5 links with both end UEs. It receives data from one UE and forwards it to the other, performing functions such as data forwarding, routing, and potentially QoS mapping. The relay UE must be authorized by the network to perform this function, and it may need to maintain a ProSe context. Discovery procedures allow end UEs to find available relays, either through direct discovery models or network-assisted discovery. The relay can support various types of traffic, including IP, Ethernet, and unstructured data, and it can handle multiple pairs of end UEs simultaneously.

Architecturally, the UE-to-UE Relay is transparent to the network in many cases, but it may interact with the 5G core for authorization, policy control, and charging. The relayed traffic does not traverse the network unless the relay UE chooses to forward it via its Uu interface (e.g., for lawful interception or when the destination is in the network). The UE-to-UE Relay is defined in TS 23.304, with protocol aspects in TS 24.554. It is particularly useful for public safety scenarios where direct communication between first responders is critical, and for commercial applications like social networking or gaming in proximity.

The relay function includes relay selection and reselection procedures to ensure robust connectivity. It also supports security mechanisms to protect the relayed communication, including authentication and encryption of the PC5 links. The relay UE may also provide IP address management for the end UEs if required. Mobility is supported, meaning the relay can move and the end UEs can switch to another relay if needed.

In summary, the 5G ProSe UE-to-UE Relay is a flexible function that enhances direct device-to-device communication by extending range and enabling multi-hop connectivity, forming an essential part of the 5G ProSe feature set for both mission-critical and commercial services.

Purpose & Motivation

The 5G ProSe UE-to-UE Relay was developed to enable direct communication between UEs that are not in direct PC5 range, thereby extending the reach of sidelink communication. Traditional D2D communication has limited range, and in scenarios like public safety operations or large venues, UEs may be spread out. The UE-to-UE Relay solves this by allowing a UE in the middle to relay traffic, effectively creating a mesh network. This is vital for mission-critical push-to-talk (MCPTT) and other group communications where all users must be connected regardless of location. It also supports commercial use cases like proximity-based social media and multiplayer gaming. By standardizing this relay in Release 19, 3GPP ensures interoperability and leverages 5G's advanced capabilities for low-latency, high-reliability communication.

What changed in its specifications

The latest release-to-release comparison of specifications that define 5G ProSe UE-to-UE Relay. Each summary describes the whole specification, not only this term.

TS 23.304Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink relaying through Intermediate UE-to-Network Relay entities, with discovery, QoS and link handling clauses. It also adds path switching between direct and indirect paths via Layer-2 UE-to-Network Relay, and ProSe support for SNPNs and CAG use in PNI-NPNs.

Full comparison in TS 23.304 →
TS 24.554Rel-18 → Rel-19

Rel-19 adds multi-hop NR sidelink UE-to-network relay with new direct link establishment procedures and discovery IEs. It extends 5G ProSe to SNPNs, adding SNPN identification, authorisation checks, and PC5 relay indications. It also adds multi-hop relay configuration over PC5 and charging-related abbreviations and content type values.

Full comparison in TS 24.554 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-18 introduced

5G ProSe UE-to-UE Relay is specified for the first time in Rel-18, with Layer-2 and Layer-3 relaying, discovery, Relay Service Codes and link establishment between 5G ProSe End UEs.

  • “Both 5G ProSe Layer-2 and Layer-3 UE-to-UE Relay provides the relaying functionality to support connectivity between 5G ProSe End UEs.” TS 23.304 v18.8.0
  • “5G ProSe UE-to-UE Relay shall modify the UE-to-UE Relay Discovery set of identifiers and forward the Direct Discovery set” TS 23.304 v18.8.0
  • 5G ProSe UE-to-UE Relay reference architecture TS 23.304CR0144
Rel-19 specification text

Rel-19 extends the 5G ProSe UE-to-UE Relay with multi-hop operation: MANET-based relaying for IP, multi-hop relay discovery with hop-count and path information, and relay reselection.

  • “the 5G ProSe Multi-hop UE-to-UE Relays form a MANET network as defined in IETF RFC 7181 [35].” TS 23.304 v19.6.0
  • “The 5G ProSe UE-to-UE Relay sends a UE-to-UE Relay Discovery Announcement message.” TS 23.304 v19.6.0
  • “The 5G ProSe UE-to-UE Relay should drop the received Solicitation message when its own User Info ID is contained in the Path information” TS 23.304 v19.6.0
Rel-20 specification text

Treating each layer-2 link as a MANET interface now applies only when PC5 groupcast mode for MANET multicast is not configured for the RSC.

  • “If the use of PC5 groupcast mode for MANET multicast for an RSC is not configured, each of the established layer-2 link” TS 23.304 v20.1.0

Defining Specifications

3GPP specifications that define or reference 5G ProSe UE-to-UE Relay, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.304 vk10 5G Proximity Services (ProSe) Stage 2 Rel-20 read
TS 24.554 vk10 5G ProSe Protocols and Procedures Rel-20 read