Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

ProSe Direct Discovery

Proximity Services Direct Discovery

Services →

ProSe Direct Discovery is a procedure where a ProSe-enabled UE discovers other ProSe-enabled UEs in its vicinity using only their direct E-UTRA or WLAN capabilities, without core network involvement.

Introduced
Rel-12
Where
Services
Specifications
4 specs
ProSe Direct Discovery Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

ProSe Direct Discovery is a key component of the Proximity Services (ProSe) framework, introduced in Release 12. It defines a procedure by which a ProSe-enabled UE can discover other ProSe-enabled UEs in its vicinity using only the capabilities of the two UEs, leveraging E-UTRA or WLAN technology. This direct discovery process is fundamental for enabling D2D communication and proximity-based services, as it allows devices to become aware of each other's presence before establishing a communication session.

The procedure operates on the principle of direct radio signal exchange between UEs. A UE that wants to be discovered transmits discovery messages, while a UE that is looking for others listens for these messages. The discovery messages contain information such as the UE's identity, application identifiers, and other parameters. The discovery can be performed in two main models: Model A and Model B. In Model A, a UE announces its presence by broadcasting discovery messages, and other UEs monitor for these announcements. In Model B, a UE queries for specific UEs by sending solicitation messages, and the target UEs respond. Both models can operate with or without network assistance.

ProSe Direct Discovery can be network-controlled or autonomous. In network-controlled discovery, the network (specifically the ProSe Function) authorizes and provisions the UEs, allocates radio resources, and may assist in the discovery process by providing configuration parameters. In autonomous discovery, UEs use pre-configured parameters to perform discovery without network involvement, which is essential for out-of-coverage scenarios. The discovery process can be further categorized as open or restricted. Open discovery does not require explicit permission from the discovered UE, while restricted discovery requires the discovered UE to have authorized the discovering UE.

The radio interface used for direct discovery is the PC5 interface, which is based on E-UTRA sidelink. The discovery messages are transmitted using specific physical channels and protocols designed for sidelink communication. The UEs must be synchronized to ensure successful reception of discovery messages. Synchronization can be achieved via network signals (e.g., from eNBs) or through direct synchronization signals from other UEs when out of coverage.

Security and privacy are important considerations in ProSe Direct Discovery. The discovery messages may contain sensitive information, and mechanisms are defined to protect the privacy of UEs, such as using temporary identifiers and encryption. The ProSe Function manages the security aspects, including authorization and key distribution.

ProSe Direct Discovery enables a wide range of applications, including public safety (e.g., finding nearby first responders), social networking (e.g., finding friends nearby), and commercial services (e.g., targeted advertising). It is a foundational technology for D2D communication and has been enhanced in later releases to support 5G and new use cases.

Purpose & Motivation

ProSe Direct Discovery was created to enable UEs to discover each other directly, without relying on the core network for the discovery process. Traditional discovery mechanisms in cellular networks require the network to facilitate or mediate the discovery, which can be inefficient and may not work in out-of-coverage scenarios. ProSe Direct Discovery solves this by allowing UEs to discover each other using only their own radio capabilities, thus enabling proximity-based services in a more efficient and scalable manner.

The motivation for ProSe Direct Discovery came from the need for public safety communication, where devices must be able to discover each other even when network infrastructure is unavailable or congested. It also addressed commercial use cases, such as social networking and local advertising, where users want to find others nearby. The technology leverages the existing E-UTRA and WLAN capabilities of UEs, making it cost-effective and widely applicable.

By enabling direct discovery, ProSe Direct Discovery reduces the load on the core network, lowers latency, and enables new applications that require immediate awareness of nearby devices. It represents a shift towards more autonomous and device-centric operation in cellular networks, paving the way for advanced D2D and IoT services.

What changed in its specifications

The latest release-to-release comparison of specifications that define ProSe Direct Discovery. Each summary describes the whole specification, not only this term.

TS 23.303Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 23.303: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 23.303 →
TS 32.277Rel-18 → Rel-19

Proximity-based Services in 5GS Phase 3 adds a new clause for ProSe Layer-3 UE-to-UE relay message flows, including multi-hop scenarios, and new fields for hop count, target End UE IP address, intermediate relay information, and PC5 QoS flow identifier with timestamps.

Full comparison in TS 32.277 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • ProSe Direct Discovery counterpart in another generation: 5G ProSe Direct Discovery
    “5G ProSe Direct Discovery: A procedure employed by a 5G ProSe-enabled UE to discover other 5G ProSe-enabled UEs in its vicinity based on direct radio transmissions between the two UEs with NR technology.” TS 23.304
  • ProSe Direct Discovery coexists with EPC-level ProSe Discovery
    “EPC-level ProSe Discovery: A ProSe Discovery procedure by which the EPC determines the proximity of two ProSe-enabled UEs and informs them of their proximity.” TS 23.303

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 7 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-12 introduced

ProSe Direct Discovery is defined for the first time as a procedure where ProSe-enabled UEs discover nearby UEs using only E-UTRA capabilities, with supporting reference points, functions and charging.

  • “A procedure employed by a ProSe-enabled UE to discover other ProSe-enabled UEs in its vicinity by using only the capabilities of the two UEs with E-UTRA technology.” TS 23.303 v12.8.0
  • “Procedures for open ProSe Direct Discovery of other ProSe-enabled UEs over PC5 reference point.” TS 23.303 v12.8.0
  • “For ProSe Direct Discovery, the ProSe Function shall collect the following charging information:” TS 32.277 v12.3.0
Rel-13 1 CR

Rel-13 extends ProSe Direct Discovery from open-only to include restricted discovery (Model A/B), with new functions, identifiers (RPAUID, PDUID) and procedures over PC5.

  • “Procedures for open and restricted ProSe Direct Discovery of other ProSe-enabled UEs over PC5 reference point.” TS 23.303 v13.6.0
  • “Mapping of RPAUID and PDUID for restricted ProSe Direct Discovery;” TS 23.303 v13.6.0
  • Restricted ProSe Direct Discovery Model B procedures TS 23.303CR0164
Rel-14 2 CRs

The ProSe charging specification was extended for ProSe Direct Discovery with restricted discovery, Model B message flows, new UE roles and functions, and a Public Safety discovery charging flow.

  • Addition of Message flow for Model B of ProSe Direct Discovery TS 32.277CR0016
  • Addition of Message flow for ProSe Direct Discovery for Public Safety use TS 32.277CR0023
  • “The Discovery Request is sent by the Discoveree UE or the Discoverer UE in order to be authorised to access the discovery resources” TS 32.277 v14.3.0
Rel-15 1 CR

ProSe Direct Discovery was extended from E-UTRA only to also allow WLAN technology as a PC5 radio option, with the definition, authorisation and charging updated accordingly.

  • “A procedure employed by a ProSe-enabled UE to discover other ProSe-enabled UEs in its vicinity by using only the capabilities of the two UEs with E-UTRA or WLAN technology.” TS 23.303 v15.1.0
  • Inclusion of WLAN direct discovery technologies as an alternative for ProSe Direct Discovery: WLAN technology agnostic part TS 23.303CR0324
  • “ProSe Function shall be able to indicate the PC5 radio technology (e.g., E-UTRA, WLAN) used for ProSe Direct Discovery in the charging information.” TS 32.277 v15.1.0
Rel-17 specification text

Rel-17 adds 5G ProSe Direct Discovery over NR (new TS 23.304, TS 33.503 security, charging in TS 32.277), extending ProSe Direct Discovery from E-UTRA to NR with new procedures and reference points.

  • “A procedure employed by a 5G ProSe-enabled UE to discover other 5G ProSe-enabled UEs in its vicinity based on direct radio transmissions between the two UEs with NR technology.” TS 23.304 v17.8.0
  • “A procedure employed by a ProSe-enabled UE to discover other ProSe-enabled UEs in its vicinity by using only the capabilities of the two UEs with E-UTRA or NR technology.” TS 32.277 v17.5.0
  • “The 5G System shall support integrity protection and replay protection of discovery messages in open 5G ProSe Direct Discovery.” TS 33.503 v17.10.0
Rel-18 2 CRs

In Rel-18, 5G ProSe Direct Discovery was extended to support UE-to-UE Relay operation, with new discovery set content, Layer-2 ID selection and security handling for relayed discovery.

  • Support of UE-to-UE Relay operation during ProSe Direct Discovery TS 23.304CR0202
  • “The Direct Discovery set of identifiers are part of the contents of the 5G ProSe Direct Discovery message as defined in clause 5.8.1.” TS 23.304 v18.8.0
  • 5G ProSe Direct Discovery Set - Clarification TS 33.503CR0149
Rel-19 1 CR

In Rel-19, 5G ProSe Direct Discovery message flows over PC5 were updated, and its service scope, SNPN adaptations, and security/provisioning text were extended for multi-hop relay features.

  • Update Message flows for ProSe Direct Discovery over PC5 reference point TS 32.277CR0055
  • “The security materials are associated with 5G ProSe Direct Discovery service for Restricted 5G ProSe Direct Discovery.” TS 33.503 v19.3.0
  • “Radio parameters when the UE is "not served by NG-RAN" for 5G ProSe Direct Discovery in clause 5.1.2.1 are expected to be aligned” TS 23.304 v19.6.0

Defining Specifications

3GPP specifications that define or reference ProSe Direct Discovery, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.303 vj00 Proximity Services (ProSe) Stage 2 Rel-19 read
TS 23.703 vc00 Proximity Services Architecture Study Rel-12 read
TS 32.277 vj20 Charging Management for Proximity Services (ProSe) Rel-19 read
TS 33.833 vd00 ProSe Security Study Rel-13 read