Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

PPPR

ProSe Per-Packet Reliability

Services →

PPPR is a ProSe QoS parameter that defines the required reliability level for individual sidelink data packets, ensuring critical messages like V2X safety information are delivered with a guaranteed probability of success.

Introduced
Rel-15
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
2 specs
PPPR Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

ProSe Per-Packet Reliability (PPPR) is a Quality of Service (QoS) parameter introduced to complement ProSe Per-Packet Priority (PPPP) for sidelink communications. While PPPP dictates the order of transmission, PPPR dictates the required likelihood of successful packet delivery. It is expressed as a target reliability value, for example, a packet delivery success probability of 90%, 99%, or 99.9%, over a defined channel delay budget. This parameter is crucial for services where mere prioritization is insufficient and a guaranteed level of transmission robustness is required.

PPPR operates by influencing the physical layer and resource management strategies of the transmitting UE. When a packet is tagged with a specific PPPR value, the UE's protocol stack uses this requirement to select appropriate transmission parameters. This can include choosing a more robust Modulation and Coding Scheme (MCS), increasing the transmission power within allowed limits, or employing techniques like packet duplication (transmitting multiple copies of the same packet over different resources in time or frequency). The UE performs a link adaptation process that considers the target PPPR, current channel conditions, and the selected resource pool's characteristics to meet the reliability target.

Architecturally, PPPR is part of the QoS profile for a ProSe service. It is configured alongside PPPP, often by a ProSe Function or via pre-configuration for standardized services like V2X. The network can broadcast or provision information about which reliability levels are supported in a given geographical area or resource pool. In network-scheduled mode (mode 1), the eNB/gNB can consider the UE's reported PPPR requirements when granting sidelink resources. In autonomous mode (mode 2), the UE autonomously selects resources and transmission schemes from a pool that supports its required PPPR level. The interaction between PPPP and PPPR allows for sophisticated traffic management; a high-priority emergency stop message (high PPPP) would also have an extremely high PPPR (e.g., 99.999%) to ensure it is received, potentially at the cost of higher resource consumption or latency.

Purpose & Motivation

PPPR was created to address the stringent reliability requirements of advanced V2X and industrial IoT applications that emerged after the initial ProSe work. While PPPP solved the problem of 'what transmits first,' it did not guarantee 'if the transmission will be successful.' Early D2D and basic V2X services assumed a best-effort reliability model. However, applications like cooperative collision avoidance, automated driving, and remote control of machinery require predictable, ultra-reliable low-latency communication (URLLC) over the sidelink.

The limitation of having only a priority mechanism was that a critical safety message could be scheduled immediately (high PPPP) but still be lost due to a poor channel condition if transmitted with an aggressive, high-efficiency MCS. PPPR introduces a second dimension to sidelink QoS, allowing the system to trade spectral efficiency for reliability when necessary. Its development was motivated by the 3GPP's work on enhancing V2X in Rel-14 and beyond, where meeting the strict performance targets set by automotive and industrial standards became imperative. PPPR enables the sidelink to support service level agreements (SLAs) for packet delivery, which is foundational for trustworthy direct communication between machines and vehicles.

What changed in its specifications

The latest release-to-release comparison of specifications that define PPPR. Each summary describes the whole specification, not only this term.

TS 36.300Rel-18 → Rel-19

Rel-19 added NTN IoT Phase 3 for LTE, covering regenerative payload S1 removal, Msg3 early data transmission, and ETWS/CMAS for NB-IoT NTN. It also added inter-RAT mobility from E-UTRAN terrestrial network to NR NTN, plus NR NTN feeder link switchover via handover.

Full comparison in TS 36.300 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • PPPR used together with PPPP
    “ProSe Per-Packet Reliability (PPPR) applies to the V2X communication over PC5 as defined in TS 23.303 [5].” TS 23.285

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 1 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-15 introduced

ProSe Per-Packet Reliability is defined for the first time as a scalar per-PDU value from 8 possible values, provided by upper layers to the PC5 access stratum to adjust transmission behaviour.

  • “A scalar value associated with a protocol data unit that defines the reliability to be applied for transmission of that protocol data unit.” TS 23.303 v15.1.0
  • “the ProSe upper layer provides a ProSe Per-Packet Reliability from a range of 8 possible values.” TS 23.303 v15.1.0
  • Add PPPR introduction to ProSe QoS descriptions TS 23.303CR0328

Defining Specifications

3GPP specifications that define or reference PPPR, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read
TR 37.985 vj00 Overview of V2X features in LTE and NR Rel-19 read