Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

Sidelink Positioning

Sidelink Positioning

Services →

Sidelink Positioning is a Rel-19 feature that determines geographical or relative location and velocity using sidelink measurements between devices, enabling high-accuracy positioning without network coverage.

Introduced
Rel-18
Where
Core Network › 5G Core
Specifications
2 specs
Sidelink Positioning Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Sidelink Positioning is a functionality introduced in 3GPP Release 19 that allows devices to determine their geographical or relative location, and possibly velocity, using measurements performed on sidelink signals. Sidelink refers to direct device-to-device communication, typically using the PC5 interface in LTE and NR. By leveraging sidelink signals, devices can perform positioning without relying solely on network infrastructure, enabling new use cases such as public safety, industrial IoT, and vehicular communications.

The core principle of Sidelink Positioning is to use the same types of measurements as traditional cellular positioning, but applied to sidelink signals. These measurements include Time of Arrival (ToA), Time Difference of Arrival (TDoA), Angle of Arrival (AoA), and Received Signal Strength (RSS). By exchanging signals between multiple devices, a device can estimate its position relative to other devices or to known reference points. The positioning can be absolute (geographical coordinates) or relative (distance and direction to other devices). The velocity can also be estimated by tracking changes in position over time.

In terms of architecture, Sidelink Positioning involves several components. The transmitting device sends a sidelink positioning reference signal (SL-PRS), which is a dedicated signal designed for accurate timing and angle measurements. The receiving device measures the signal and may share the measurements with other devices or with a location server. The location server, which could be in the network or at the edge, computes the final position. Alternatively, the devices can perform the computation themselves in a distributed manner. The 3GPP specifications 23.273 and 38.305 define the stage 2 and stage 3 aspects of Sidelink Positioning, including the procedures, signaling, and measurement reporting.

Sidelink Positioning is particularly useful in scenarios where network coverage is poor or unavailable, such as in disaster areas, underground tunnels, or remote locations. It can also enhance positioning accuracy in dense urban environments by using direct links between devices, which may have better propagation conditions than links to base stations. In vehicular communications, Sidelink Positioning can enable cooperative positioning, where vehicles exchange their positions and sensor data to improve overall accuracy and safety.

The introduction of Sidelink Positioning in Rel-19 builds on the extensive work on sidelink in LTE (Rel-12 onwards) and NR (Rel-16 onwards). It leverages the advanced signal design and beamforming capabilities of NR sidelink to achieve high accuracy. The feature is expected to be further enhanced in future releases, with improvements in accuracy, latency, and power efficiency. As 5G evolves towards 6G, Sidelink Positioning is likely to play a key role in enabling ubiquitous and reliable positioning for a wide range of applications.

Purpose & Motivation

Sidelink Positioning was created to address the limitations of traditional cellular positioning, which relies on signals between devices and base stations. In many scenarios, such as indoor environments, underground areas, or disaster zones, network coverage may be unreliable or unavailable, making it difficult to determine location accurately. Sidelink Positioning solves this by allowing devices to communicate directly with each other and perform positioning measurements without the need for network infrastructure. This enables new applications in public safety, industrial automation, and vehicular communications, where accurate location information is critical.

Before Sidelink Positioning, device-to-device positioning was possible to some extent using proprietary solutions or ad-hoc methods, but there was no standardized approach in 3GPP. The lack of standardization led to interoperability issues and limited performance. Sidelink Positioning provides a standardized framework that ensures consistent performance and interoperability across different vendors and devices. It also leverages the advanced features of NR sidelink, such as wide bandwidth and beamforming, to achieve high accuracy.

The motivation for Sidelink Positioning also comes from the growing demand for high-accuracy positioning in 5G and beyond. Applications such as autonomous driving, augmented reality, and asset tracking require sub-meter accuracy, which is challenging to achieve with traditional cellular positioning alone. By using sidelink measurements, devices can achieve better accuracy due to shorter distances and favorable propagation conditions. Additionally, Sidelink Positioning can operate in a distributed manner, reducing latency and improving scalability. As a result, it is expected to become an essential component of future positioning systems, complementing existing cellular and GNSS-based methods.

What changed in its specifications

The latest release-to-release comparison of specifications that define Sidelink Positioning. Each summary describes the whole specification, not only this term.

TS 23.273Rel-18 → Rel-19

Rel-19 adds LMF-based AI/ML positioning support with Nlmf_DataExposure services. It also adds periodic location event procedures based on NRPPa measurements, MWAB location service clauses, and enhanced network automation enablers.

Full comparison in TS 23.273 →
TS 38.305Rel-18 → Rel-19

Rel-19 adds enhanced NR topology support to TS 38.305, including WAB-gNB, updated definitions and gNB-to-LMF information transfer. It also includes two further related items.

Full comparison in TS 38.305 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • Sidelink Positioning used together with SL-PRS
    “The Sidelink Positioning Reference Signal (SL-PRS) is defined to facilitate Ranging/Sidelink positioning methods, such as SL-TOA, SL-TDOA, SL-RTT, SL-AoA” TS 38.300

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 2 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-18 introduced

Sidelink Positioning is defined and specified for the first time in Rel-18, with TS 23.586 definitions, operation modes and procedures, and TS 23.273 LMF-assisted procedures.

  • “Sidelink Positioning: Positioning UE using PC5 to obtain absolute location, relative locationn, or ranging information.” TS 23.586 v18.7.0
  • “Sidelink Positioning provides absolute location, relative position, or Ranging information of a UE by using PC5 for the positioning.” TS 23.586 v18.7.0
  • “Ranging and Sidelink Positioning as defined in TS 23.586 [40] is supported.” TS 23.273 v18.12.0
Rel-19 1 CR

Rel-19 adds charging for Ranging and Sidelink Positioning: converged charging architecture, message flows, CDR content and Nchf data types, bindings and OpenAPI extensions in the charging specifications.

  • “the GMLC shall be able to perform converged charging for 5GS LCS defined in TS 23.273 [202] and Ranging based services and Sidelink Positioning” TS 32.271 v19.2.0
  • Introduction of Ranging and Sidelink Positioning Charging TS 32.271CR0019
  • “This feature indicates support of Ranging and Sidelink Positioning.” TS 32.291 v19.7.0

Defining Specifications

3GPP specifications that define or reference Sidelink Positioning, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 23.273 vj70 5G Location Services Architecture Stage 2 Rel-19 read
TS 38.305 vj30 NG-RAN UE Positioning Stage 2 Rel-19 read