Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

PPPP

ProSe Per-Packet Priority

Services →

PPPP is a ProSe QoS mechanism that assigns a priority level to individual D2D packets to ensure critical data like public safety traffic is transmitted with higher precedence over less urgent traffic in sidelink.

Introduced
Rel-13
Where
Services › IMS
Specifications
9 specs
Also in
Radio Access Network
PPPP Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

ProSe Per-Packet Priority (PPPP) is a fundamental Quality of Service (QoS) parameter defined within the 3GPP architecture for Proximity-based Services (ProSe), specifically for sidelink communication (e.g., PC5 interface). It operates by assigning a numerical priority value to each individual data packet generated by a ProSe-enabled User Equipment (UE) for direct communication with another UE. This priority value is an integer, typically ranging from 1 (highest priority) to 8 (lowest priority) as defined in the relevant specifications, and is included within the packet's protocol data unit.

The PPPP value is a key input for the Medium Access Control (MAC) layer's scheduling and resource selection procedures on the sidelink. In both network-scheduled (mode 1) and UE autonomous (mode 2) resource allocation modes, the PPPP influences how the UE contends for and utilizes sidelink resources. A packet with a higher priority (lower PPPP number) will be scheduled for transmission before packets with lower priority. This influences the logical channel prioritization process, buffer status reporting, and the selection of the appropriate resource pool configured for a given priority range. The network can pre-configure resource pools that are mapped to specific PPPP levels, ensuring high-priority traffic uses resources with more favorable characteristics, such as lower latency or higher reliability.

Architecturally, PPPP is associated with a ProSe Per-Packet Priority Profile, which is configured in the UE, often via provisioning or policy control. The application layer or a ProSe function within the UE assigns the PPPP based on the nature of the service (e.g., public safety voice, video, or data). This mechanism is decoupled from traditional EPS bearer-based QoS, as sidelink communication may occur outside network coverage. PPPP's role is critical in managing congestion in dense D2D scenarios, such as public safety operations or vehicle-to-everything (V2X) platooning, where it ensures that life-critical alerts or control messages are not delayed by less important background data traffic.

Purpose & Motivation

PPPP was introduced to address the specific QoS demands of direct Device-to-Device communication, which traditional cellular QoS models (based on EPS bearers between UE and network) could not adequately support. Prior to ProSe, QoS was managed end-to-end via the core network. For sidelink communications, especially out-of-coverage or at the edge of coverage, a distributed, per-packet prioritization mechanism was necessary. The primary problem it solves is the deterministic prioritization of traffic in a decentralized radio environment where multiple UEs contend for a shared sidelink resource pool.

Its creation was motivated heavily by public safety and mission-critical communication requirements, which were a key driver for ProSe standardization. In disaster scenarios where network infrastructure may be compromised, first responders using D2D modes need guaranteed transmission for emergency alerts and command communications. PPPP provides this by ensuring that a 'lifeline' voice packet from a firefighter is always treated as more important than a non-urgent data update from another device. It also supports the evolution of V2X services, where a brake warning message from a car must have absolute priority over a periodic beacon message to prevent accidents. PPPP thus enables service differentiation in a purely peer-to-peer radio link, a capability that was absent in pre-Rel-13 LTE.

What changed in its specifications

The latest release-to-release comparison of specifications that define PPPP. Each summary describes the whole specification, not only this term.

TS 24.281Rel-17 → Rel-18

Added MBS session management and XML schema types. Added MCVideo emergency and imminent peril adhoc group call procedures. Added MCVideo gateway UE function for non-3GPP access. Added 5G ProSe support to MCVideo. Added migration service authorization for MCVideo clients.

Full comparison in TS 24.281 →
TS 24.282Rel-17 → Rel-18

MCData location reporting, MCData adhoc group communications, 5G MBS Phase 2 procedures, gateway UE support, and ProSe term mappings are key Rel-18 additions.

Full comparison in TS 24.282 →

Technology family

Sidelink, D2D and V2X · Services

  1. Rel-12 EPC-level ProSe Discovery, ProSe, ProSe Direct Communication, ProSe Direct Discovery, PSBCH, PSCCH, PSDCH, PSSCH, Sidelink
  2. Rel-13 PPPP, ProSe UE-to-Network Relay, Remote UE
  3. Rel-14 RSU
  4. Rel-15 PPPR
  5. Rel-16 NR sidelink communication, PC5 QoS Flow, PQI
  6. Rel-17 5G ProSe Direct Communication, 5G ProSe Direct Discovery, 5G ProSe Remote UE, 5G ProSe UE-to-Network Relay, NR sidelink discovery, SRAP
  7. Rel-18 5G ProSe UE-to-UE Relay, NR SL CA, Sidelink Positioning, SL-PRS, U2U Relay UE, U2U Remote UE
  8. Rel-19 5G ProSe Intermediate UE-to-Network Relay
  • PPPP counterpart in another generation: PQI
    “The Priority Level for NR PC5 has the same format and meaning as the Priority value of the ProSe Per-Packet Priority (PPPP) for LTE PC5 defined in TS 23.285 [8].” TS 23.287
  • PPPP used together with PPPR
    “ProSe Per-Packet Reliability (PPPR) applies to the V2X communication over PC5 as defined in TS 23.303 [5].” TS 23.285

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 4 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-13 introduced

ProSe Per-Packet Priority is defined for the first time in TS 23.303 as a scalar per-PDU priority (8 values) applied to PC5 transmissions, with QCI mapping rules and relay handling.

  • “A scalar value associated with a protocol data unit that defines the priority handling to be applied for transmission of that protocol data unit.” TS 23.303 v13.6.0
  • “the ProSe upper layer provides a ProSe Per-Packet Priority from a range of 8 possible values.” TS 23.303 v13.6.0
  • “The ProSe Per-Packet Priority is independent of the Destination Layer-2 ID and applies to both one-to-one and one-to-many ProSe Direct Communication.” TS 23.303 v13.6.0
Rel-14 1 CR

TS 23.285 specifies PPPP use for V2X over PC5, with application-set PPPP, UE reporting it to the eNB for resource requests, and PPPP-to-delay-budget mapping for autonomous resource selection.

  • “The application layer sets the PPPP for each V2X message when passing it to lower layer for transmission.” TS 23.285 v14.9.0
  • “UE provides priority information reflecting PPPP to the eNB for resources request.” TS 23.285 v14.9.0
  • Mapping between PPPP and latency for autonomous resources selection mode TS 23.285CR0004
Rel-15 1 CR

Rel-15 adds support for reliable transmission over PC5 using an extended PPPP, extending the PPPP mechanism for V2X sidelink.

  • “Support of Reliable transmission over PC5 using extended PPPP” TS 23.285 v15.4.0
  • Support of Reliable transmission over PC5 using extended PPPP TS 23.285CR0037
Rel-16 1 CR

Rel-16 24.588 first specifies PPPP to PDB mapping rules, including an indicator (PPMRI) and a coded mapping rules field for PPPP-to-packet-delay-budget mapping.

  • “The PPMRI bit indicates presence of the PPPP to PDB mapping rules filed.” TS 24.588 v16.4.0
  • “The PPPP to PDB mapping rules field is coded according to figure 5.3.1.22 and table 5.3.1.22.” TS 24.588 v16.4.0
  • Adding the flag indicating the optional PPPP to PDB mapping rules TS 24.588CR0019

Defining Specifications

3GPP specifications that define or reference PPPP, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 24.281 vk10 MCVideo Signalling Control Rel-20 read
TS 24.282 vk10 MCData Signalling Control Protocols Rel-20 read
TS 24.379 vk10 MCPTT Call Control Protocol Rel-20 read
TS 24.385 vj00 V2X Communication Provisioning Management Object Rel-19 read
TS 24.386 vj00 V2X Communication Protocols and Procedures Rel-19 read
TS 24.481 vj30 MCS Group Management Protocol Rel-19 read
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read
TS 36.321 vj30 E-UTRA MAC Protocol Specification Rel-19 read
TR 37.985 vj00 Overview of V2X features in LTE and NR Rel-19 read