Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

DPS

Dynamic Point Switch

Radio Access Network →

DPS is a Rel-19 transmission scheme in which the serving transmission point for a device can be dynamically switched among multiple candidate points to improve coverage and throughput in multi-point deployments.

Introduced
Rel-19
Where
User Equipment
Specifications
2 specs
DPS Description Purpose Neighbours Specifications

Description

Dynamic Point Switch (DPS) is a multi-point transmission technique introduced in 3GPP Rel-19 and referenced in the radio transmission and reception conformance specifications 36.521 and 38.521. In a DPS scheme, a user equipment (UE) is served by one of several candidate transmission points at any given time, and the network dynamically selects which point transmits based on channel conditions, scheduling decisions, and mobility. This differs from schemes where multiple points transmit simultaneously; DPS selects a single serving point per transmission occasion and switches as needed.

The concept builds on the broader family of coordinated multi-point (CoMP) techniques. In earlier releases, dynamic point selection allowed the network to choose among transmission points for a given subframe, with the selection driven by channel quality reports from the UE. DPS in Rel-19 extends and refines this idea, integrating it with modern multi-antenna and multi-point architectures. The UE measures reference signals from candidate points and reports channel state information; the network uses these reports to decide which point should serve the UE for upcoming transmissions.

Architecturally, DPS requires coordination among transmission points, typically through a central scheduler or a coordinated set of schedulers connected by low-latency backhaul. The candidate points may be different cells, different distributed units, or different antenna panels. Because the serving point can change rapidly, the control signaling must support timely switching, and the UE must be able to receive from any candidate point without excessive reconfiguration. This places demands on reference signal design, measurement reporting, and scheduling coordination.

DPS is particularly valuable at cell edges and in dense deployments where the best serving point varies with UE movement and shadowing. By switching to the point with the best channel, the network can improve coverage, increase throughput, and reduce outage probability compared with a fixed serving cell. It also complements beam management, since the selected point may use a specific beam toward the UE.

The conformance specifications 36.521 and 38.521 define the radio transmission and reception tests that ensure UE and network implementations meet the required accuracy for the measurements and behaviors that DPS depends on. These tests verify that devices can correctly measure and report the channel conditions that drive point switching, and that the resulting transmissions meet performance requirements.

Purpose & Motivation

DPS exists to improve the reliability and efficiency of transmissions in multi-point deployments by ensuring that the device is served by the most suitable transmission point at each moment. In conventional single-cell operation, a UE is anchored to one serving cell even when another point offers a better channel, which can lead to poor coverage and reduced throughput at cell edges.

Earlier coordinated multi-point techniques demonstrated that selecting among points can yield substantial gains, but they required coordination and measurement capabilities that evolved over successive releases. DPS in Rel-19 reflects the maturation of these capabilities, integrating dynamic point selection with modern multi-antenna and distributed architectures.

The motivation is to extract more value from dense deployments: when multiple transmission points are available, dynamically choosing the best one improves spectral efficiency and user experience without requiring simultaneous multi-point transmission, which can be complex and resource-intensive. DPS thus offers a favorable trade-off between coordination complexity and performance gain.

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-19 Initial

Initial introduction of Dynamic Point Switch as a Rel-19 transmission scheme, with conformance requirements referenced in 36.521 and 38.521 for radio transmission and reception testing.

Defining Specifications

3GPP specifications that define or reference DPS, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 36.521 vj11 E-UTRA UE Conformance Testing for Satellite Access Rel-19 read
TS 38.521 vj10 UE Conformance Spec for NR Satellite Access Rel-19 read