Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

ETWS

Earthquake and Tsunami Warning System

Services →

ETWS is a 3GPP public warning system that rapidly disseminates area-specific earthquake and tsunami alerts to mobile users in affected areas via cellular networks.

Introduced
Rel-8
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
16 specs
Also in
Services, User Equipment
ETWS Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The Earthquake and Tsunami Warning System (ETWS) is a standardized public warning system introduced in 3GPP Release 8 to provide timely alerts about earthquakes, tsunamis, and other emergencies to mobile subscribers. It is part of the broader Public Warning System (PWS) framework and is designed to deliver warnings with minimal latency to users in specific geographic areas. ETWS operates through the cellular network infrastructure, allowing operators to broadcast alerts without requiring users to subscribe to a service or install a special application.

ETWS defines two types of notifications: the Primary Notification, which is a short, high-priority alert containing essential information such as the warning type and a security signature, and the Secondary Notification, which provides additional details like instructions, affected areas, and other relevant information. The Primary Notification is designed to be delivered extremely quickly, within seconds, to maximize the chance of people taking immediate protective actions. The Secondary Notification follows and can be updated as the situation evolves.

From an architectural perspective, ETWS relies on the Cell Broadcast Service (CBS) for message delivery. The core network includes a Cell Broadcast Center (CBC) that receives alert requests from authorized entities, such as government agencies, and forwards them to the Radio Access Network (RAN). In LTE and 5G, the CBC interfaces with the Mobility Management Entity (MME) or Access and Mobility Management Function (AMF) via the SBc-AP protocol (specified in 3GPP TS 29.168). The RAN then broadcasts the messages over the air interface using System Information Blocks (SIBs) or dedicated broadcast channels. For example, in LTE, ETWS notifications are transmitted in SIB10 and SIB11, while in 5G they are carried in SIB6, SIB7, and SIB8.

ETWS supports area-specific targeting, allowing alerts to be sent only to cells in the affected region. This is achieved by including a list of warning area cells or a warning area code in the alert request. The system also includes security mechanisms to ensure that only authorized entities can send alerts, preventing false alarms. The Primary Notification includes a digital signature that can be verified by the UE to confirm the authenticity of the alert.

ETWS is a critical component of disaster management and public safety. It enables governments and emergency agencies to reach a large population instantly, potentially saving lives by providing advance warning of natural disasters. The system is designed to work even under network congestion, as broadcast messages do not require individual connections and can be received by all UEs in a cell. ETWS has been continuously refined across releases, with enhancements in message formats, security, and integration with other warning systems like CMAS (Commercial Mobile Alert System) and PWS.

Purpose & Motivation

ETWS was created to address the need for a standardized, rapid, and reliable method to deliver emergency warnings to mobile users during natural disasters, particularly earthquakes and tsunamis. Before its introduction, there was no unified cellular-based warning system; alerts were often disseminated through traditional media or sirens, which could be slow or ineffective in reaching people quickly. The 2004 Indian Ocean tsunami highlighted the critical need for timely warnings, motivating the development of ETWS in 3GPP.

ETWS solves the problem of delivering area-specific alerts with low latency and high reliability. It leverages the existing cellular infrastructure, which has wide coverage and can reach users even in remote areas. By using broadcast technology, ETWS can send a single message to all users in a cell simultaneously, avoiding network overload and ensuring that alerts are received without delay. The system also provides security features to prevent spoofing and unauthorized alerts, which is essential for maintaining public trust.

Furthermore, ETWS was designed to be interoperable across different generations of mobile networks (2G, 3G, 4G, and 5G), ensuring that warnings can be delivered regardless of the user's device or network technology. This backward compatibility and cross-generation support make ETWS a robust and future-proof solution for public safety.

What changed in its specifications

The latest release-to-release comparison of specifications that define ETWS. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 22.268Rel-11 → Rel-12

Rel-12 adds regulatory conditional integrity protection requirements for Warning Notifications. It also removes text about USIM-based VPLMN settings changes.

Full comparison in TS 22.268 →

Technology family

Broadcast and multicast · Services

  1. Phase 1 CBC, CBCH, CBS, SMS-CB
  2. Phase 2 CBE
  3. R99 BMC, SABP
  4. Rel-6 ALC, BM-SC, FDT, FLUTE, LCT, MBMS, MBMS Bearer Service, MBMS download delivery method, MBMS streaming delivery method, MBMS User Service, TMGI
  5. Rel-7 MBSFN
  6. Rel-8 ETWS, MCE, PWS
  7. Rel-9 CBSP, CMAS, eMBMS, MBMS-GW
  8. Rel-10 KPAS
  9. Rel-11 EU-Alert
  10. Rel-12 MooD
  11. Rel-13 MBMS group communication delivery method, SC-PTM
  12. Rel-14 MBMS transparent delivery method, Receive Only Mode
  13. Rel-15 CBCF, PWS-IWF
  14. Rel-16 5G Broadcast
  15. Rel-17 5MBS, Broadcast MBS session, MB-SMF, MB-UPF, MBS, MBS Distribution Session, MBS User Service, MBSF, MBSSF, MBSTF, Multicast MBS session, Object Distribution Method, Packet Distribution Method

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 11 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-8 introduced

ETWS is specified for the first time in Rel-8: PWS distributes ETWS warning messages via GSM, UMTS and E-UTRAN, with primary and secondary notification procedures.

  • “PWS enables the distribution of ETWS warning messages in GSM, UMTS and E-UTRAN.” TS 23.041 v8.11.0
  • “The Paging message is used to inform ETWS capable UEs in RRC_IDLE and UEs in RRC_CONNECTED about presence of an ETWS primary notification” TS 36.331 v8.21.0
  • “The ETWS primary notification with security procedure is used to transfer an ETWS primary notification to the UE.” TS 25.331 v8.25.0
Rel-9 1 CR

ETWS handling was modified in Rel-9: the ETWS Primary Notification now follows a Warning Period instead of broadcasting continuously, separate ETWS and CBS WRITE-REPLACE messages are sent, and CMAS is handled alongside ETWS.

  • “The ETWS Primary Notification message is broadcasted according to the Warning Period parameter.” TS 23.041 v9.11.0
  • “When containing an ETWS emergency message the WRITE-REPLACE message includes the "Paging ETWS Indicator" to differentiate it from a normal CBS message” TS 23.041 v9.11.0
  • Reception of ETWS notification in limited service state TS 25.304CR0236
Rel-10 2 CRs

ETWS handling changed in Rel-10: UTRAN RRC AS-level ETWS duplicate detection was removed, and E-UTRA ETWS scheduling information and system information were corrected.

Rel-11 1 CR

ETWS behaviour changed: UE alerts only if configured to accept warnings on that PLMN, core-network authentication requirement removed, and duplicate detection for primary and secondary notifications reworded.

  • “if the MS is configured to accept warnings on that PLMN (see 3GPP TS 31.102 [18]) the ETWS capable MS alerts the user immediately” TS 23.041 v11.6.0
  • “Removal of security for ETWS/PWS over E-UTRAN” TS 23.041 v11.6.0
  • Invalidation of ETWS with security feature TS 36.331CR1220
Rel-12 specification text

TS 23.041 added clarifications that the Data Coding Scheme IE is not required for ETWS primary notification but is mandatory for secondary notification, and that message content applies only to secondary notification.

  • “The Data Coding Scheme IE is not required for ETWS primary notification but it is mandatory for ETWS secondary notification” TS 23.041 v12.8.0
  • “For ETWS, the description of the warning message content is only applicable for the secondary notification.” TS 23.041 v12.8.0
Rel-13 specification text

ETWS notification handling was adapted in Rel-13: ETWS paging/notification reading is now excluded for NB-IoT, BL UEs and UEs in CE, and TS 23.041 gained ETWS Primary Notification description for the E-UTRAN interface.

  • “to inform UEs in RRC_IDLE other than NB-IoT UEs, and UEs in RRC_CONNECTED other than NB-IoT UEs, BL UEs and UEs in CE, about an ETWS primary notification” TS 36.331 v13.17.0
  • “ETWS and/or CMAS capable UEs in RRC_CONNECTED, other than BL UEs and UEs in CE, shall attempt to read paging at least once every defaultPagingCycle” TS 36.331 v13.17.0
  • “The ETWS Primary Notification message for E-UTRAN radio interface is described in 3GPP TS 36.331 [36].” TS 23.041 v13.3.0
Rel-14 specification text

In Rel-14 ETWS/CMAS notification and system information change on MBMS-dedicated and FeMBMS/Unicast-mixed cells is indicated via Direct Indication FeMBMS, following the MCCH modification periodicity.

  • “the change of system information and ETWS/CMAS notification is indicated by using Direct Indication FeMBMS defined in 6.6a” TS 36.331 v14.18.0
Rel-15 specification text

ETWS support was extended to NG-RAN/5G: TS 23.041 adds ETWS primary notification handling in NG-RAN, and TS 38.331 specifies UE ETWS monitoring and SIB6/SIB7 notification.

  • “For ETWS Primary Notification, the Repetition Period IE and the Number of Broadcasts Requested IE are ignored by NG-RAN node” TS 23.041 v15.5.0
  • “The format of the ETWS Primary Notification message is same as format of the ETWS Primary Notification message defined for E-UTRAN” TS 23.041 v15.5.0
  • “if the UE is ETWS capable and si-SchedulingInfo includes scheduling information for SIB6:” TS 38.331 v15.30.0
Rel-16 specification text

ETWS handling changed: ETWS-capable UEs in NG-RAN gained defined procedures, new ETWS CBS message identifiers for ePWS UEs, and CE UEs can receive ETWS indication in RRC_CONNECTED.

  • “In NG-RAN, an ETWS capable UE or a CMAS capable UE uses the procedures as outlined in subclause 9.1.3.5.” TS 23.041 v16.4.0
  • “monitors control channels associated with the shared data channel to acquire ETWS notification and/or CMAS notification;” TS 36.331 v16.21.0
  • “ETWS CBS Message Identifier for warning message dedicated to UEs with no user interface and with ePWS functionality.” TS 23.041 v16.4.0
Rel-17 specification text

UE ETWS/CMAS monitoring changed in NR: capable UEs in RRC_INACTIVE with ongoing SDT must monitor for PWS notification in any paging occasion at least once per defaultPagingCycle, if the initial DL BWP is associated with a CD-SSB.

  • “ETWS or CMAS capable UEs in RRC_INACTIVE while SDT procedure is ongoing shall monitor for indication about PWS notification in any paging occasion” TS 38.331 v17.18.0
  • “ETWS or CMAS capable UEs in RRC_IDLE or in RRC_INACTIVE while SDT procedure is not ongoing shall monitor for indications about PWS notification” TS 38.331 v17.18.0
Rel-19 1 CR

ETWS primary and secondary notifications gain geofencing support, with warning area coordinates carried in ETWS notifications and UE handling rules for matching, discarding and removing stored geofenced warning messages.

  • “For ETWS, in satellite E-UTRAN and satellite NG-RAN, the Warning Area Coordinates can be included in the ETWS Secondary Notification Message.” TS 23.041 v19.4.0
  • “the UE shall discard the primary notification and shall not display it.” TS 23.041 v19.4.0
  • Adding support for geofencing to ETWS primary and secondary notification TS 23.041CR0257

Defining Specifications

3GPP specifications that define or reference ETWS, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 22.268 vl00 Public Warning System Requirements Rel-21 read
TS 25.304 vj10 UE Idle Mode Procedures Rel-19 read
TS 25.331 vj01 UTRAN Radio Resource Control Protocol Rel-19 read
TS 29.168 vj00 SBc-AP Protocol Specification Rel-19 read
TR 33.969 vj00 Security for Public Warning System (PWS) Rel-19 read
TS 36.300 vj20 E-UTRAN Radio Interface Protocol Architecture Rel-19 read
TS 36.304 vj30 LTE UE Idle Mode Procedures Rel-19 read
TS 36.331 vj40 E-UTRA Radio Resource Control (RRC) Protocol Rel-19 read
TS 36.401 vj00 E-UTRAN Overall Architecture Description Rel-19 read
TS 36.410 vj00 S1 Interface: General Aspects and Principles Rel-19 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.304 vj30 NR UE Idle and Inactive State Procedures Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read
TS 38.401 vj30 NG-RAN Architecture Description Rel-19 read
TS 48.049 vj00 Cell Broadcast Service Protocol Specification Rel-19 read