Description
The MBMS streaming delivery method is a key service enabler in 3GPP Multimedia Broadcast Multicast Service (MBMS) that allows for the delivery of continuous media, such as real-time video and audio, to multiple users simultaneously. It is one of the two primary delivery methods in MBMS, the other being file delivery. Streaming delivery is designed for content that is consumed in real-time, where the media is played out as it is received, without the need for complete download before playback. This makes it ideal for live broadcasts, such as sports events, news, and emergency alerts.
Technically, the MBMS streaming delivery method operates by establishing an MBMS streaming session, which is a unidirectional bearer that carries the media stream from the Broadcast Multicast Service Center (BM-SC) to the User Equipment (UE). The media is typically encoded using codecs such as H.264/AVC for video and AAC for audio, and is packetized according to the Real-time Transport Protocol (RTP) over UDP/IP. The BM-SC is responsible for ingesting the content, performing any necessary transcoding or rate adaptation, and then distributing it to the MBMS Gateway (MBMS-GW) and subsequently to the radio access network for transmission.
The streaming session is characterized by a set of parameters that define the quality of service, such as bitrate, latency, and error resilience. These parameters are signaled to the UE via the MBMS Service Announcement, allowing the UE to configure its receiver appropriately. The UE's MBMS client sets up the streaming session, buffers the incoming media, and plays it out to the user. The streaming delivery method supports both broadcast and multicast modes. In broadcast mode, the content is transmitted to all UEs in a service area, while in multicast mode, only UEs that have joined the multicast group receive the content. This flexibility allows operators to tailor the delivery to the target audience.
One of the key challenges in streaming delivery over MBMS is ensuring robust reception in varying radio conditions. To address this, MBMS employs techniques such as application-layer forward error correction (FEC) and retransmissions. FEC adds redundancy to the media stream, allowing the UE to recover from packet losses without requiring retransmissions, which is crucial in a broadcast environment where feedback is limited. In later releases, more advanced FEC schemes and adaptive streaming techniques have been introduced to further improve quality and efficiency. For example, Dynamic Adaptive Streaming over HTTP (DASH) can be used in conjunction with MBMS to provide adaptive bitrate streaming.
The MBMS streaming delivery method is specified in 3GPP TS 26.346 (MBMS User Services), TS 26.237 (IMS-based PSS and MBMS User Service), and other related specifications. It has evolved over releases to support higher resolutions, lower latency, and better error resilience. In 5G, the concept has been extended to the 5G Multicast Broadcast Service (MBS), which aims to provide similar streaming capabilities with enhanced performance. The streaming delivery method remains a vital tool for operators to deliver live content efficiently, leveraging the broadcast nature of the cellular network to reach many users at once without overwhelming the network with individual unicast streams.
Purpose & Motivation
The MBMS streaming delivery method was created to enable efficient broadcast of live media content over cellular networks. Before its introduction, delivering live video to multiple users required separate unicast streams for each user, which consumed significant network resources and limited scalability. As mobile networks evolved to support higher data rates, the demand for mobile TV and live streaming grew, necessitating a more efficient approach. MBMS streaming delivery addresses this by allowing a single stream to be transmitted to many users simultaneously, dramatically reducing the load on the core network and radio access network.
Historically, the first version of MBMS in Release 6 included support for streaming delivery, but it was limited in terms of codecs and quality. Release 8 introduced the MBMS streaming delivery method as a formalized concept, with improved specifications and support for more advanced codecs. This coincided with the rise of smartphones and the increasing popularity of video streaming. The method was designed to be flexible, supporting both broadcast and multicast modes, and to be robust against packet loss through the use of FEC.
The motivation for streaming delivery also includes the need for real-time content, such as emergency alerts and live events. Unlike file delivery, which can tolerate delays, streaming requires timely delivery to ensure a good user experience. The MBMS streaming delivery method provides the necessary mechanisms to meet these requirements, including synchronization and buffering. Over time, it has been enhanced to support adaptive streaming and integration with IMS-based services, further expanding its applicability. In 5G, the principles of MBMS streaming delivery are being carried forward into MBS, ensuring that operators can continue to offer efficient live streaming services.
What changed in its specifications
The latest release-to-release comparison of specifications that define MBMS streaming delivery method. Each summary describes the whole specification, not only this term.
Added a suggested presentation offset for synchronized playout and updated the nBookmark XML schema to version 2.
Full comparison in TS 26.237 →Added a profiled FLUTE FDT schema with semantics and versioning, plus 5GMS references and requirements, removing old schema clauses. Updated User Service Bundle Description schema versions and added a new unicast announcement FQDN format.
Full comparison in TS 26.346 →Technology family
Broadcast and multicast · Services
- Phase 1 CBC, CBCH, CBS, SMS-CB
- Phase 2 CBE
- R99 BMC, SABP
- Rel-6 ALC, BM-SC, FDT, FLUTE, LCT, MBMS, MBMS Bearer Service, MBMS download delivery method, MBMS streaming delivery method, MBMS User Service, TMGI
- Rel-7 MBSFN
- Rel-8 ETWS, MCE, PWS
- Rel-9 CBSP, CMAS, eMBMS, MBMS-GW
- Rel-10 KPAS
- Rel-11 EU-Alert
- Rel-12 MooD
- Rel-13 MBMS group communication delivery method, SC-PTM
- Rel-14 MBMS transparent delivery method, Receive Only Mode
- Rel-15 CBCF, PWS-IWF
- Rel-16 5G Broadcast
- Rel-17 5MBS, Broadcast MBS session, MB-SMF, MB-UPF, MBS, MBS Distribution Session, MBS User Service, MBSF, MBSSF, MBSTF, Multicast MBS session, Object Distribution Method, Packet Distribution Method
- MBMS streaming delivery method used together with MBMS download delivery method
“This delivery method complements the download delivery method which consists of the delivery of files.” TS 26.346
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Release Timeline
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 5 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
TS 26.346 v6e0 first defines the MBMS streaming delivery method for delivering continuous media such as speech, audio and video over an MBMS bearer in an MBMS streaming session.
- “delivery of continuous media (e.g. real-time video) by means of a MBMS streaming session” TS 26.346 v6.14.0
- “The purpose of the MBMS streaming delivery method is to deliver continuous multimedia data (i.e. speech, audio and video) over an MBMS bearer.” TS 26.346 v6.14.0
The MBMS streaming delivery method now also covers DIMS as continuous media and gains a defined option of streaming delivery over unicast (clause 8.5).
- “deliver continuous multimedia data (i.e. speech, audio, video and DIMS) over an MBMS bearer. Using MBMS Streaming delivery on unicast is defined in clause 8.5.” TS 26.346 v7.11.0
The MBMS streaming delivery method appears for the first time, defined as delivery of continuous media such as real-time video by means of an MBMS streaming session.
- “MBMS streaming delivery method: delivery of continuous media (e.g. real-time video) by means of a MBMS streaming session” TS 26.237 v8.7.0
Adds H.265 (HEVC) parameter set guidance for the MBMS streaming delivery method, using sprop-vps/sps/pps SDP parameters and recommending no_parameter_set_update_flag equal to 1.
- “When H.265 (HEVC) is in use in the MBMS streaming delivery method, it is recommended to transmit H.265 (HEVC) parameter sets within the SDP description” TS 26.346 v12.12.0
- “it is recommended that no_parameter_set_update_flag, if present, for each CVS in the stream is equal to 1” TS 26.346 v12.12.0
The MBMS streaming delivery method's description of deliverable media was changed by removing DIMS from the list of continuous multimedia data types (speech, audio, video) carried over an MBMS bearer.
- “deliver continuous multimedia data (i.e. speech, audio and video) over an MBMS bearer” TS 26.346 v13.7.0
- “deliver continuous multimedia data (i.e. speech, audio, video and DIMS) over an MBMS bearer” TS 26.346 v13.7.0
Defining Specifications
3GPP specifications that define or reference MBMS streaming delivery method, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 26.237 vj00 | IMS for PSS and MBMS Control | Rel-19 read |
| TS 26.346 vj30 | MBMS User Services Specification | Rel-19 read |
| TR 26.946 vj00 | MBMS User Services Overview | Rel-19 read |
| TR 26.947 vj00 | FEC Evaluation for MBMS Enhancement | Rel-19 read |