Description
The Enhanced Voice Services (EVS) codec is the 3GPP speech codec specified in 26.445 and used in IMS/MTSI telephony as profiled in 26.114. It was designed to supersede AMR and AMR-WB for mobile voice, offering significantly improved quality and efficiency across a wide range of bit rates and operating conditions. EVS operates in two distinct operational modes that share a common framework but serve different interoperability needs.
The EVS Primary mode is the native, full-capability mode. It supports a wide range of bit rates (from low rates suitable for capacity-constrained conditions up to high rates for enhanced quality), multiple bandwidths (narrowband, wideband, super-wideband and full-band), and advanced features such as discontinuous transmission, comfort noise generation, error concealment, and jitter-resilient operation. Primary mode is used end-to-end when both endpoints support EVS, delivering the best voice quality and efficiency.
The EVS AMR-WB Inter-Operable (IO) mode provides backward interoperability with the AMR-WB codec. When EVS operates in AMR-WB IO mode, the speech frames it produces are bitstream-interoperable with AMR-WB: frames generated by an EVS AMR-WB IO encoder can be decoded by an AMR-WB decoder, and frames generated by an AMR-WB encoder can be decoded by an EVS AMR-WB IO decoder, both without transcoding. This is a crucial deployment property: it allows EVS-capable and AMR-WB-only endpoints to communicate directly, avoiding transcoding resources and the associated quality loss and latency.
In network architecture, EVS is negotiated via SDP within IMS using the mechanisms of 26.114 (MTSI). Codec mode, bit rate and bandwidth are negotiated per session, and the media gateway or UE selects appropriate modes. The dual-mode design means an operator can deploy EVS while retaining full interworking with the large installed base of AMR-WB devices and networks. EVS also supports features relevant to VoLTE and VoNR, including robust handling of packet loss and adaptation to radio conditions.
Key components include the codec's source coding and decoding algorithms, its mode-switching logic, and its interoperability layer with AMR-WB. The codec's flexibility — variable bit rate, bandwidth and mode — lets it adapt to network conditions and terminal capabilities, which is central to delivering consistent voice quality over mobile networks.
Purpose & Motivation
EVS was created to raise mobile voice quality and efficiency beyond what AMR and AMR-WB could deliver, while preserving backward compatibility with the large installed base of AMR-WB equipment. AMR-WB improved on AMR by extending to wideband audio, but operators needed a codec that could deliver super-wideband/full-band quality, operate efficiently at low rates under poor radio conditions, and still interoperate with existing networks. EVS addresses this with its Primary mode for best quality and its AMR-WB IO mode for seamless interworking.
The dual-mode design solves a classic migration problem: how to introduce a superior codec without forcing transcoding or stranding legacy devices. By making EVS AMR-WB IO frames bitstream-interoperable with AMR-WB, 3GPP ensured that EVS and AMR-WB endpoints can communicate directly, avoiding media gateway transcoding, extra latency and quality degradation. This made EVS deployable incrementally across VoLTE and later VoNR networks.
What changed in its specifications
The latest release-to-release comparison of specifications that define EVS codec. Each summary describes the whole specification, not only this term.
Rel-19 adds a reference to the IVAS fixed-point C code specification in TS 26.114. It also lists that specification among supported specifications for MTSI immersive audio clients.
Full comparison in TS 26.114 →Rel-18 removes the EVS channel-aware coding clauses and several EVS codec internals from TS 26.445. It also adds new definitions for frame, EVS codec and its operational modes, plus abbreviations.
Full comparison in TS 26.445 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference EVS codec, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 26.114 vk11 | IMS Multimedia Telephony Client | Rel-20 read |
| TS 26.445 vj10 | EVS Codec Specification | Rel-19 read |