Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

EFR

Enhanced Full Rate speech codec

Also written as: GSM-EFR

Services →

EFR is an Enhanced Full Rate speech codec standard for GSM networks that operates at 12.2 kbps using an ACELP algorithm to provide near-wireline quality audio, significantly improving upon the original Full Rate codec.

Introduced
Phase 2
Where
Services › Codecs
Specifications
15 specs
Also in
User Equipment
EFR Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The GSM Enhanced Full Rate (EFR) speech codec is a 12.2 kbps codec standardized by 3GPP and ETSI. It employs the Algebraic Code Excited Linear Prediction (ACELP) coding technique, which was a state-of-the-art method at its introduction. The codec processes 20 ms speech frames, each containing 160 samples at an 8 kHz sampling rate. For each frame, the encoder analyzes the speech signal to extract parameters representing the linear predictive filter (LPC), the adaptive codebook (pitch), and the fixed algebraic codebook (innovation). These parameters are then quantized and transmitted over the radio interface at a net bitrate of 12.2 kbps, which fits into the GSM channel's gross bitrate after channel coding for error protection.

The EFR decoder on the receiving side reconstructs the speech signal by passing the excitation signal (derived from the adaptive and fixed codebooks) through the synthesis filter (defined by the LPC parameters). A critical component of EFR is its robust channel coding and error concealment mechanisms. It uses a Rate 1/2 convolutional code for forward error correction (FEC) and includes sophisticated algorithms to detect and mask frame errors, ensuring acceptable voice quality even in moderate radio channel conditions. The codec is designed to be interoperable and is mandatory for GSM terminals supporting the relevant frequency bands.

EFR's architecture is integrated into the GSM Full Rate traffic channel (TCH/FS). When a call is set up, the network and mobile station can negotiate the use of EFR if both support it, otherwise falling back to the original Full Rate (FR) or Half Rate (HR) codecs. The codec's performance is characterized by high Mean Opinion Score (MOS) ratings, often exceeding 4.0 under clean channel conditions, which was a substantial improvement over the FR codec's MOS of around 3.5. This made EFR a key enabler for high-quality commercial mobile voice service.

Purpose & Motivation

The EFR codec was developed to address the primary user complaint in early GSM networks: voice quality that was noticeably inferior to fixed-line telephony. The original GSM Full Rate (FR) codec, while a revolutionary digital codec for its time, had limitations in audio fidelity, particularly in the presence of background noise or for certain speaker types. The competitive landscape and user expectations demanded a mobile voice service comparable to wireline quality.

Its creation was motivated by advancements in speech coding algorithms, notably the ACELP technique, which offered a better trade-off between bitrate, complexity, and quality. The goal was to develop a codec that could use the existing GSM channel structure (the Full Rate channel) without requiring changes to the radio infrastructure, ensuring a smooth upgrade path. EFR provided this by fitting its 12.2 kbps payload into the channel capacity after applying similar channel coding overhead as the FR codec.

EFR solved the problem of perceived voice quality, which was critical for customer satisfaction and network differentiation. It allowed operators to market 'landline-like' voice quality. Furthermore, its robustness to transmission errors ensured the quality improvement was maintained in real-world cellular environments. EFR set a new benchmark for mobile voice and paved the way for subsequent codecs like AMR, which incorporated EFR as one of its operating modes.

What changed in its specifications

The latest release-to-release comparison of specifications that define EFR. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 26.090Rel-15 → Rel-16

Rel-16 brings only minor changes to TS 26.090: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 26.090 →

Technology family

Speech and voice codecs · Services › Codecs

  1. Phase 1 GSM FR
  2. Phase 2 GSM EFR, GSM HR
  3. R98 AMR-NB
  4. R99 PDC-EFR, TDMA-EFR
  5. Rel-5 AMR-WB
  6. Rel-12 EVS
  7. Rel-18 IVAS
  • EFR extended by AMR-NB
    “An alternative and fully interoperable implementation using as a basis the 12.2 kbit/s mode of the Adaptive Multi Rate speech coder is described in section 11.” TS 46.051
  • EFR succeeds GSM FR (not stated verbatim in the specifications)

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 2 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Phase 2 introduced

Introduced in Phase 2 (release dating of the term; no individual change cited).

Rel-7 specification text

Voice broadcast service (VBS) now allows the EFR codec on voice broadcast channels, as an operator option, alongside AMR and half rate codecs, with codec information signalled for the call.

  • “As an operator option, the EFR codec, standard half rate codec, AMR half rate codec, and AMR full rate codec can be supported;” TS 43.069 v7.7.0
  • “A pre-Rel-7 VBS capable mobile station will not be able to participate in a broadcast call using the EFR codec” TS 43.069 v7.7.0

Defining Specifications

3GPP specifications that define or reference EFR, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 22.813 va00 Enhanced Voice Services for EPS Rel-10 read
TS 26.077 vj00 AMR Noise Suppression Minimum Performance Requirements Rel-19 read
TS 26.090 vj00 AMR Speech Codec Detailed Mapping Specification Rel-19 read
TS 26.447 vj00 EVS Frame Loss Concealment Procedure Rel-19 read
TR 26.952 vj00 EVS Codec Selection, Verification & Characterization Rel-19 read
TR 26.975 vj00 AMR Speech Codec Performance Background Rel-19 read
TR 26.976 vj00 AMR-WB Codec Characterization & Verification Rel-19 read
TR 26.978 vj00 AMR Noise Suppression Selection Phase Technical Report Rel-19 read
TS 28.062 vj00 Tandem Free Operation (TFO) Service Description Rel-19 read
TS 43.068 vj00 Voice Group Call Service (VGCS) Stage 2 Rel-19 read
TS 43.069 vj00 Voice Broadcast Service (VBS) Stage 2 Rel-19 read
TS 46.055 vj00 GSM Enhanced Full Rate Speech Codec Performance Rel-19 read
TS 46.085 vj00 GSM Speech Codec Interoperability Test Report Rel-19 read
TS 26.093 vj00 SCR operation of AMR codec for UMTS Rel-19 read