Description
The inter-passband gap is a radio-frequency concept defined in the 3GPP RF specifications 38.106 and 38.115. It denotes the frequency gap between two supported consecutive passbands that belong to different operating bands. In other words, when a UE supports operation in two bands whose passbands are adjacent or nearly adjacent in the spectrum, the inter-passband gap is the separation between the upper edge of the lower passband and the lower edge of the upper passband. This gap is a key parameter for defining RF requirements such as blocking, spurious emissions and coexistence between the two bands.
The concept arises because modern UEs support many band combinations, including combinations of bands that are close together in frequency. When two passbands are close, signals transmitted in one band can leak into the other, and the UE's receiver must tolerate interference from its own transmitter as well as from external sources. The inter-passband gap quantifies how much spectral separation exists, which in turn determines how stringent the filtering and isolation requirements must be. A small gap implies tight filtering and careful RF design; a large gap relaxes the requirements.
In the specification framework, the inter-passband gap is used to define reference points for requirements such as the UE-to-UE coexistence analysis, the adjacent channel selectivity and the blocking characteristics. It also feeds into the definition of supported band combinations and the associated RF requirements in 38.101-1 and related documents. Because the gap depends on the exact passband edges of each band, it must be recalculated whenever a new band or band combination is introduced.
The term is closely related to the intra-band gap, which applies to passbands within the same operating band, and to the general concept of band separation used in coexistence studies. It is particularly relevant for carrier aggregation and dual connectivity scenarios where a UE simultaneously operates in two bands that are close in frequency, because the transmitter in one band can desensitise the receiver in the other. The gap therefore informs the design of duplexers, filters and antenna sharing schemes.
Introduced in Rel-17, the definition has been carried forward unchanged through Rel-18, Rel-19 and Rel-20 as new bands and combinations were added. Its stability reflects that it is a purely geometric property of the spectrum, independent of the radio technology using it, and it remains a foundational parameter for RF conformance testing and UE design.
Purpose & Motivation
The inter-passband gap exists to provide a precise, quantifiable measure of spectral separation between passbands of different operating bands so that RF requirements can be defined consistently. When a UE supports multiple bands, especially adjacent ones, self-interference and coexistence become critical design constraints. Without a standard definition of the gap, equipment vendors and test houses would have no common reference for specifying filtering, blocking and emission limits, leading to interoperability problems.
The concept became necessary as the number of supported band combinations grew dramatically with carrier aggregation and dual connectivity. Earlier specifications dealt mainly with single-band operation or widely separated bands, where coexistence was less of an issue. As operators sought to combine spectrum in nearby bands, 3GPP needed a formal way to characterise the separation and derive requirements from it. The inter-passband gap fills that role and supports the definition of UE RF core requirements in 38.106 and 38.115.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Inter-passband gap, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.106 vk00 | NR Repeaters: RF Requirements (TS 38.106) | Rel-20 read |
| TS 38.115 vj20 | Repeater Conformance Testing - Part 2: Radiated | Rel-19 read |