Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Operating band

Operating band

Radio Access Network →

Operating band is the specific frequency range, with defined technical requirements, in which a mobile network operates to ensure interoperability and regulatory compliance for technologies like NR, LTE, and UMTS.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
31 specs
Operating band Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

An operating band is a fundamental concept in 3GPP specifications that defines a specific frequency range in which a mobile network operates, along with a set of technical requirements. It is used to ensure that user equipment (UE) and base stations (e.g., eNodeB, gNodeB) can interoperate seamlessly across different regions and network deployments. Operating bands are defined for various radio access technologies, including NR (New Radio), E-UTRA (LTE), UTRA (UMTS), and GSM/EDGE. Each operating band is characterized by its frequency range, duplex mode (paired or unpaired), and specific technical parameters such as channel bandwidths, carrier frequencies, and spurious emission limits.

The concept of operating bands originated in the early days of cellular networks to manage spectrum allocation and ensure compatibility between devices and networks. In 3GPP, operating bands are specified in a series of technical specifications (TS) such as TS 25.104, 36.104, 38.104, and 37.104, which define the bands for UTRA, E-UTRA, NR, and multi-RAT operation, respectively. Each band is assigned a unique identifier (e.g., n1, n78 for NR; Band 1, Band 3 for LTE) and is associated with a set of requirements for both base stations and user equipment. These requirements cover transmitter and receiver characteristics, including output power, frequency error, adjacent channel leakage ratio (ACLR), and receiver sensitivity.

Operating bands can be paired (FDD) or unpaired (TDD). In paired bands, separate frequency ranges are used for uplink and downlink, with a duplex spacing between them. In unpaired bands, the same frequency range is used for both uplink and downlink, typically with time-division duplexing. The frequency range of an operating band can correspond to one or several consecutive nominal channels (e.g., 5 MHz channels in earlier systems). If the channels are not consecutive, each subset is considered an individual operating band. This flexibility allows operators to deploy networks in fragmented spectrum.

The definition of operating bands has evolved significantly over releases. Initially, in Release 5, the term was defined in the context of repeaters, describing the frequency range in which a repeater operates. In Release 8, the definition was revised to focus on E-UTRA, describing a frequency range in which E-UTRA operates with specific technical requirements. Release 9 expanded the definition to include UTRA and GSM/EDGE. Later releases, particularly Release 19, further broadened the definition to encompass NR, E-UTRA, UTRA, and GSM/EDGE, reflecting the multi-RAT nature of modern networks. This evolution mirrors the growing complexity of spectrum management and the need to support multiple technologies in the same frequency range.

Operating bands are critical for global roaming and device compatibility. A UE must support the operating bands used by the networks it intends to access. Manufacturers design devices to support multiple bands, often grouped into regional or global configurations. The 3GPP specifications ensure that a device certified for a particular band will meet the necessary performance requirements, enabling interoperability across vendors and operators. As new spectrum is allocated (e.g., millimeter wave for 5G), new operating bands are defined to accommodate these frequencies. The ongoing development of operating bands is essential for the successful deployment of 5G and future generations.

Purpose & Motivation

The operating band concept exists to provide a standardized framework for spectrum usage in mobile networks. It solves the problem of fragmented spectrum allocations and ensures that devices and network equipment from different vendors can interoperate. Without a common definition of frequency ranges and associated technical requirements, global roaming and device compatibility would be impossible. Operating bands allow regulators, operators, and manufacturers to refer to a common set of parameters when designing, deploying, and certifying equipment.

Historically, early cellular systems used proprietary or regional frequency definitions, leading to incompatibilities. The introduction of 3GPP operating bands brought order to this chaos by defining bands that are recognized worldwide. This has facilitated the economies of scale that make mobile devices affordable and has enabled seamless international roaming. As technology evolved from GSM to UMTS to LTE to 5G, the operating band concept was extended to cover new frequency ranges and duplex modes, ensuring continuity and backward compatibility.

The motivation for the continuous evolution of operating bands is the growing demand for mobile broadband and the need to utilize new spectrum efficiently. New bands are defined as regulators release spectrum for mobile use, such as the 3.5 GHz band for 5G. The operating band framework allows these new frequencies to be integrated into the existing ecosystem quickly, with clear technical requirements that ensure coexistence with other services and technologies. It also supports carrier aggregation and dual connectivity, where multiple operating bands are used simultaneously to increase data rates.

What changed in its specifications

The latest release-to-release comparison of specifications that define Operating band. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 25.105Rel-18 → Rel-19

Rel-19 brings only minor changes to TS 25.105: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TS 25.105 →

Technology family

Frequency ranges and bands · Radio Access Network › NG-RAN (5G)

  1. Rel-13 LAA, LBT
  2. Rel-14 eLAA
  3. Rel-15 CAPC, FR1, FR2, NR operating band, Supplementary Uplink
  4. Rel-16 NR-U
  5. Rel-17 FR2-1, FR2-2
  6. Rel-18 FR2-NTN, SBFD

Also in this family (introduction release not pinned to a single defining specification): Sub-band, Superseding-band

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 4 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-15 introduced

Operating band unwanted emission requirements (conducted and OTA) were newly specified for NR in TS 38.104 and for AAS BS in TS 37.145, and the E-UTRA test requirements gained Band 50/74/75 emission limits.

  • “The Operating band unwanted emissions define all unwanted emissions in each supported downlink operating band plus the frequency ranges ΔfOBUE above and ΔfOBUE below each band.” TS 38.104 v15.22.0
  • “Table 6.7.5.5.4.6-3: Operating band 50, 74 and 75 emission test limits above 1518 MHz” TS 37.145 v15.20.0
  • OTA Operating band unwanted emissions (6.7.5) - corrections to text and tables TS 37.145CR0055
Rel-16 specification text

Operating band unwanted emissions requirements were changed for single-RAT multi-band base stations, and NR testing now also uses the widest channel bandwidth and highest sub-carrier spacing.

  • “For Operating band unwanted emissions, NR shall also be tested with SC with widest supported channel bandwidth and highest supported sub-carrier spacing.” TS 37.145 v16.21.0
  • “CR for TS 36104 Operating band unwanted emissions for Single RAT multi-band BS” TS 36.104 v16.17.0
  • “CR to 37.145-2: Operating band unwanted emission requirements” TS 37.145 v16.21.0
Rel-18 2 CRs

Operating band requirements changed: unwanted emission limits for Single RAT BS supporting multi-band operation were corrected across specs, and n28 UL MIMO was added to the operating band set.

  • CR for TS 38.104: Operating band unwanted emissions for Single RAT BS supporting multi-band operation TS 38.104CR0482
  • Addition of n28 UL MIMO Operating band TS 38.521-1CR2388
  • “These requirements for LTE based 5G terrestrial broadcast BS may apply in certain regions as additional Operating band unwanted emission limits.” TS 36.104 v18.8.0
Rel-19 1 CR

Correction to the operating band unwanted emissions requirements for a multi-band connector in 38.104.

  • Correction of Operating band unwanted emissions for multi-band connector TS 38.104CR0748

Defining Specifications

3GPP specifications that define or reference Operating band, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 25.105 vj00 UTRA TDD Base Station RF Requirements Rel-19 read
TS 25.106 vj00 UTRA FDD Repeater RF Performance Requirements Rel-19 read
TS 25.141 vj00 UTRA FDD Base Station RF Conformance Testing Rel-19 read
TS 25.143 vj00 UTRA FDD Repeater RF Test Requirements Rel-19 read
TS 36.104 vj20 E-UTRA/NB-IoT Base Station RF Requirements Rel-19 read
TS 36.106 vj10 E-UTRA FDD Repeater RF Characteristics Rel-19 read
TS 36.108 vk00 Satellite Access Node RF Requirements Rel-20 read
TS 36.141 vj10 RF Test Methods for LTE and NB-IoT Base Stations Rel-19 read
TS 36.143 vj00 E-UTRA FDD Repeater RF Testing Rel-19 read
TS 37.104 vj40 NR, E-UTRA, UTRA, GSM/EDGE and NB-IoT Multi-Standard Radio Rel-19 read
TS 37.141 vj40 RF Test Methods and Conformance for Multi-Standard Radio Base Stations Rel-19 read
TS 37.145 vj40 AAS Base Station Radiated Requirements Rel-19 read
TS 37.802 va10 MSR BS Non-Contiguous RF Requirements Rel-10 read
TS 37.812 vb30 Multi-Band MSR BS Requirements Rel-11 read
TS 37.814 vc00 L-band Supplemental Downlink for UTRA/E-UTRA Rel-12 read
TR 37.900 vj00 Multi-Standard Radio (MSR) Base Station Requirements Rel-19 read
TS 38.104 vk10 NR Base Station RF Requirements Rel-20 read
TS 38.108 vk00 NR NTN Satellite Access Node RF Requirements Rel-20 read
TS 38.113 vj20 BS Electromagnetic Compatibility (EMC) Rel-19 read
TS 38.114 vj00 EMC Requirements for NR Repeaters and NCR Rel-19 read
TS 38.141 vj40 BS Conformance Testing (TR 38.141) Rel-19 read
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.175 vj00 EMC for NR IAB Nodes Rel-19 read
TS 38.194 vj40 Ambient IoT RF Requirements Rel-19 read
TR 38.815 vf10 NR Frequency Range 24.25-29.5 GHz Study Rel-15 read
TS 38.817 3GPP TR 38.817 Rel-15 read
TS 38.819 vg00 Band n65 for New Radio Technical Report Rel-16 read
TS 38.887 vg00 NR Band n259 Specification (39.5-43.5 GHz) Rel-16 read
TS 51.021 vj00 RF test methods and conformance requirements for GSM BSS Rel-19 read
TS 51.026 vj00 GSM Repeater RF Testing Specification Rel-19 read