Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

CAPC

Channel Access Priority Class

Radio Access Network →

CAPC is a standardized priority mechanism for NR-U that defines four classes with different contention parameters to determine how devices contend for channel access in unlicensed spectrum.

Introduced
Rel-15
Where
Radio Access Network › NG-RAN (5G)
Specifications
5 specs
CAPC Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Channel Access Priority Class (CAPC) is a fundamental mechanism in 5G NR-U (New Radio in Unlicensed spectrum) that governs how User Equipment (UE) and gNBs contend for access to unlicensed frequency bands. The system operates within the Listen-Before-Talk (LBT) framework mandated by regulatory requirements for unlicensed spectrum usage. CAPC defines four distinct priority classes (1-4, with 1 being highest priority) that map to different contention parameters, specifically the Contention Window (CW) size and maximum Channel Occupancy Time (COT). Each class has predefined values for minimum and maximum CW sizes, which determine the random backoff duration before transmission attempts.

The architecture integrates CAPC at multiple protocol layers. At the physical layer (specified in 38.212), CAPC influences the LBT procedure parameters. At the MAC layer (37.213), it determines the specific contention behavior during channel access attempts. The RRC layer (38.331) handles the configuration and signaling of CAPC parameters between gNB and UE. The system operates by mapping different QoS Flow Identifiers (QFIs) or 5QI values to specific CAPC values, ensuring that high-priority traffic like URLLC receives more favorable contention parameters than best-effort traffic.

Key components include the LBT procedure itself, which consists of Clear Channel Assessment (CCA) and Extended CCA (ECCA) phases. During ECCA, the device performs a random backoff countdown based on the CW size associated with its CAPC. Higher priority CAPCs have smaller minimum and maximum CW sizes, resulting in shorter average backoff times. The maximum COT also varies by CAPC, with higher priorities typically granted longer transmission opportunities once channel access is obtained. This hierarchical structure ensures that time-sensitive applications can access the channel more quickly while still maintaining fairness with other systems.

The role of CAPC in the network extends beyond simple prioritization. It enables dynamic spectrum sharing between 5G NR-U and other technologies like Wi-Fi by implementing a standardized priority scheme that aligns with similar mechanisms in IEEE 802.11. The gNB configures CAPC mappings based on network policies and traffic characteristics, allowing operators to optimize spectrum utilization while meeting diverse QoS requirements. This mechanism is particularly crucial for supporting network slicing in unlicensed spectrum, where different slices may require different channel access priorities to fulfill their service level agreements.

Purpose & Motivation

CAPC was created to address the fundamental challenge of operating 5G NR in unlicensed spectrum bands (primarily 5 GHz and 6 GHz) where multiple radio technologies must coexist fairly. Prior to NR-U, cellular systems operated exclusively in licensed spectrum with guaranteed access, but the demand for additional bandwidth drove 3GPP to develop specifications for unlicensed operation. The primary problem CAPC solves is how to implement effective QoS differentiation in a contention-based environment while complying with regulatory requirements for fair spectrum sharing.

Historical context shows that previous LTE-based unlicensed solutions (LAA, eLAA) had simpler prioritization mechanisms that weren't optimized for 5G's diverse service requirements. The limitations included insufficient granularity for supporting URLLC, eMBB, and mMTC simultaneously in shared spectrum. CAPC provides a more sophisticated framework that aligns with 5G's service-based architecture and enables better integration with the 5QI (5G QoS Identifier) framework. This allows operators to maintain consistent QoS policies across both licensed and unlicensed spectrum components of their networks.

The motivation for CAPC's creation stemmed from the need to support advanced 5G services in spectrum-sharing scenarios without compromising performance or regulatory compliance. By defining standardized priority classes with specific contention parameters, CAPC ensures predictable behavior across different vendor implementations and enables global interoperability. This was particularly important for enabling features like dual connectivity with NR-U as a secondary cell, where consistent channel access behavior is essential for maintaining seamless user experience and meeting latency requirements for critical applications.

What changed in its specifications

The latest release-to-release comparison of specifications that define CAPC. Each summary describes the whole specification, not only this term.

TS 38.212Rel-18 → Rel-19

Rel-19 adds sub-band full duplex (SBFD) support to TS 38.212. It introduces UEIRI handling, new SBFD abbreviations and definitions, and SBFD-specific resource counting in PUSCH uplink control information procedures.

Full comparison in TS 38.212 →
TS 38.300Rel-18 → Rel-19

Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.

Full comparison in TS 38.300 →

Technology family

Frequency ranges and bands · Radio Access Network › NG-RAN (5G)

  1. Rel-13 LAA, LBT
  2. Rel-14 eLAA
  3. Rel-15 CAPC, FR1, FR2, NR operating band, Supplementary Uplink
  4. Rel-16 NR-U
  5. Rel-17 FR2-1, FR2-2
  6. Rel-18 FR2-NTN, SBFD

Also in this family (introduction release not pinned to a single defining specification): Sub-band, Superseding-band

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 4 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-15 introduced

TS 37.213 first specifies the Channel Access Priority Class tables for NR-U channel access, with four classes, maximum channel occupancy times and contention parameters, for downlink and uplink.

Rel-16 specification text

CAPC is specified for NR-U for the first time: four-class tables for channel access in 37.213, plus 38.300/38.331 rules for choosing and configuring CAPC per bearer, MAC CE and UL transmission.

  • “Table 4.1.1-1: Channel Access Priority Class (CAPC)” TS 37.213 v16.14.0
  • “when the CAPC is not indicated in the DCI, the UE shall select the CAPC as follows:” TS 38.300 v16.22.0
  • “SRB0, SRB1 and SRB3 are assigned with the highest priority Channel Access Priority Class (CAPC), (i.e. CAPC = 1)” TS 38.331 v16.22.0
Rel-17 specification text

CAPC rules were restricted to FR1 shared spectrum operation, and CAPC-related UL access configuration lists were split by DCI format and by FR1 versus FR2-2, where the FR2-2 list contains only channel access types.

  • “For operation with shared spectrum channel access in FR1, SRB0, SRB1 and SRB3 are assigned with the highest priority Channel Access Priority Class (CAPC)” TS 38.331 v17.18.0
  • “The field ul-AccessConfigListDCI-0-1-r17 only contains a list of UL channel access types and is only applicable for FR2-2” TS 38.331 v17.18.0
  • “The Channel Access Priority Classes (CAPC) of radio bearers and MAC CEs are either fixed or configurable for operation in FR1:” TS 38.300 v17.17.0
Rel-18 1 CR

CAPC is extended to sidelink in shared spectrum: Table 4.5-1 defines SL CAPCs, the highest CAPC is used for multi-slot channel occupancy, and RRC can configure CAPC for sidelink DRBs.

  • “the applicable channel access priority class (CAPC) is defined in Table 4.5-1.” TS 37.213 v18.6.0
  • “the highest CAPC value among the associated CAPC values with the multiple SL transmissions is used” TS 37.213 v18.6.0
  • Correction on applicable CAPC for PSFCH and S-SSB transmissions TS 37.213CR0060

Defining Specifications

3GPP specifications that define or reference CAPC, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 37.213 vj00 Shared Spectrum Physical Layer Procedures Rel-19 read
TS 38.212 vj40 NR Multiplexing and Channel Coding Rel-19 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read
TR 38.808 vh00 Study on NR above 52.6 GHz to 71 GHz Rel-17 read