Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

FR2-NTN

Frequency Range 2 for Non-Terrestrial Networks

Radio Access Network →

FR2-NTN is the use of millimeter-wave frequency bands from 24.25 GHz to 71.0 GHz for satellite and other non-terrestrial network components within the 5G NR system.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
FR2-NTN Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

FR2-NTN is a technical specification within 3GPP that adapts the existing 5G New Radio (NR) Frequency Range 2 (FR2), also known as millimeter-wave (mmWave) spectrum, for operation in Non-Terrestrial Networks (NTN). NTN encompasses communication platforms like geostationary (GEO) and low-earth orbit (LEO) satellites, high-altitude platform stations (HAPS), and air-to-ground networks. The core architectural principle involves modifying the NR physical layer and higher-layer protocols defined for terrestrial networks to compensate for the unique challenges of the NTN environment, primarily the significantly larger propagation delays, substantial Doppler shifts due to satellite motion, and the vast cell coverage areas. Key technical components specified for FR2-NTN include enhanced timing advance mechanisms to handle the long round-trip time, advanced Doppler pre-compensation and tracking algorithms in both the user equipment (UE) and the satellite/gateway, and adaptations to random access procedures to accommodate the delay. The radio interface operates within the FR2 bands as defined in TS 38.101-5, which specifies the specific frequency bands, channel bandwidths, and transmission power requirements suitable for satellite links. The role of FR2-NTN in the network is to provide a standardized, high-throughput wireless backhaul link for NTN gateways (connecting the satellite to the terrestrial core network) and, in some deployment scenarios, to enable direct high-data-rate access to user devices, complementing terrestrial 5G coverage in remote, maritime, and aerial regions.

Purpose & Motivation

FR2-NTN was created to integrate high-capacity satellite links into the 5G ecosystem, addressing the limitation of terrestrial networks which cannot provide ubiquitous global coverage. Prior to 3GPP standardization, satellite communication operated in proprietary silos, preventing seamless service continuity with terrestrial mobile networks. The motivation stems from growing demand for global connectivity for IoT, enterprise, government, and consumer applications, where terrestrial infrastructure is economically or physically impractical. FR2, with its large available bandwidth, is essential for delivering the multi-gigabit data rates envisioned for 5G, even via satellite. FR2-NTN standardizes how this spectrum is used for NTN, solving problems of interoperability between satellite operators and terrestrial network equipment vendors, and enabling device manufacturers to build single devices that can connect to both terrestrial and satellite networks using the same radio technology.

What changed in its specifications

The latest release-to-release comparison of specifications that define FR2-NTN. Each summary describes the whole specification, not only this term.

TS 38.211Rel-18 → Rel-19

Rel-19 changed TS 38.211 for sub-band full duplex (SBFD). It added PRACH and PDSCH resource mapping text covering SBFD symbols and uplink or downlink sub-bands.

Full comparison in TS 38.211 →
TS 38.213Rel-18 → Rel-19

Rel-19 adds sub-band full duplex handling, covering SBFD power control parameters, PUCCH and PRACH resources, slot configuration and random access. It also adds a downlink carrier aggregation via switching clause and a Type0-PDCCH CSS monitoring text addition.

Full comparison in TS 38.213 →

Technology family

Frequency ranges and bands · Radio Access Network › NG-RAN (5G)

  1. Rel-13 LAA, LBT
  2. Rel-14 eLAA
  3. Rel-15 CAPC, FR1, FR2, NR operating band, Supplementary Uplink
  4. Rel-16 NR-U
  5. Rel-17 FR2-1, FR2-2
  6. Rel-18 FR2-NTN, SBFD

Also in this family (introduction release not pinned to a single defining specification): Sub-band, Superseding-band

  • FR2-NTN builds on FR2
    “To extend the NR downlink coverage for NTN operating in, for FR1-NTN and FR2-NTN bands” TS 38.300

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-18 introduced

FR2-NTN is introduced in Rel-18 across the NR specifications, with new operating bands, channel bandwidths, SSB patterns, handover and timing requirements for mmWave NTN.

  • CR for TS 38.213 for introduction of FR2-NTN TS 38.213CR0648
  • “NTN satellite covers FR1-NTN and FR2-NTN operating bands in the present specification.” TS 38.101-5 v18.15.0
  • “Table 5.2.3-1: Satellite operating bands in FR2-NTN” TS 38.101-5 v18.15.0
Rel-19 1 CR

FR2-NTN requirements were extended in Rel-19: FR2-NTN channel raster options (I1,I2) gained (8,8), synchronization raster and time masks were specified, and VSAT requirements apply with FR1-NTN numerology.

  • “(I1, I2) ϵ {(1,4) or (2, 8) or (8, 8)}” TS 38.101-5 v19.6.0
  • “the requirements defined for FR2-NTN apply for VSAT operating in cells with FR1-NTN numerology.” TS 38.133 v19.6.0
  • Draft CR on UE channel bandwidth for FR2-NTN TS 38.101-5CR0173
Rel-20 2 CRs

TS 38.133 gains RRM performance test cases for FR2-NTN in Rel-20, as part of NR NTN enhancements.

  • CR to TS 38.133 on test cases for FR2-NTN for Rel-20 NR NTN TS 38.133CR6844
  • CR on RRM test case for FR2-NTN R20 TS 38.133CR6939

Defining Specifications

3GPP specifications that define or reference FR2-NTN, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.211 vj50 NR Physical Channels and Signals Rel-19 read
TS 38.213 vj50 NR Physical Layer Control Procedures Rel-19 read
TS 38.214 vj50 NR Physical Layer Data Channel Procedures Rel-19 read