Description
The Lower Edge is a frequency reference point defined in 3GPP E-UTRA specifications TS 36.104, TS 36.141, and TS 36.808. It represents the lowest frequency in the aggregated channel bandwidth for multiple contiguously aggregated carriers in a specified operating band, or the lowest frequency in the channel bandwidth of a single E-UTRA carrier, or the lowest frequency in the channel bandwidth of the lowest carrier for E-UTRA multi-carrier operation in a specified operating band. In essence, it is the bottom boundary of the occupied spectrum for a given carrier configuration, and it serves as an anchor for defining RF requirements.
The concept of the Lower Edge is closely tied to the way 3GPP specifies RF requirements. Many transmitter and receiver requirements—such as spectrum emission mask, adjacent channel leakage ratio, spurious emissions, and reference sensitivity—are defined relative to the edges of the channel bandwidth. By defining a precise Lower Edge, the specifications ensure that both base station and UE implementations interpret the frequency boundaries consistently. This is particularly important for carrier aggregation, where multiple contiguous carriers form a wider aggregated channel bandwidth. In that case, the Lower Edge is the bottom of the aggregated bandwidth, not the bottom of each individual carrier.
For a single E-UTRA carrier, the Lower Edge is simply the lowest frequency of the channel bandwidth, which is determined by the carrier center frequency and the channel bandwidth. For example, a 20 MHz carrier centered at 2,140 MHz has a Lower Edge at 2,130 MHz. For contiguous carrier aggregation, the Lower Edge is the lowest frequency across all aggregated carriers, which may be offset from the individual carrier edges depending on the aggregation configuration. For multi-carrier operation where the lowest carrier is in a specified operating band, the Lower Edge is the bottom of that lowest carrier's channel bandwidth.
The Lower Edge is used in conjunction with the Upper Edge to define the occupied channel bandwidth and to specify out-of-band emissions. Transmitter requirements such as the operating band unwanted emissions (OBUE) and the spectrum emission mask are defined as a function of the frequency offset from the Lower Edge and Upper Edge. Receiver requirements such as blocking and adjacent channel selectivity also reference these edges. By using a common reference point, the specifications avoid ambiguity in how requirements apply to different bandwidth configurations and aggregation scenarios.
In TS 36.104 (Base Station radio transmission and reception), TS 36.141 (Base Station conformance testing), and TS 36.808 (Carrier aggregation for E-UTRA), the Lower Edge is used to define test configurations and measurement points. Test equipment must be able to identify the Lower Edge precisely to apply the correct measurement filters and offsets. The term is therefore both a theoretical concept and a practical test reference. Its definition has remained stable since Rel-10, reflecting the maturity of the E-UTRA RF requirement framework.
Purpose & Motivation
The Lower Edge exists to provide a single, unambiguous frequency reference for defining RF requirements in E-UTRA. Without such a reference, transmitter and receiver requirements would be difficult to specify consistently across different channel bandwidths, carrier aggregation configurations, and multi-carrier scenarios. The Lower Edge, together with the Upper Edge, forms the boundary of the occupied spectrum and allows requirements to be expressed as offsets from a known point.
Historically, the introduction of carrier aggregation in Rel-10 created a need for a reference that could span multiple contiguous carriers. Prior to carrier aggregation, each carrier had its own well-defined channel edges, and requirements could be expressed per carrier. With aggregation, the aggregated channel bandwidth became the relevant unit for certain requirements, and a new reference point was needed. The Lower Edge definition was extended to cover the aggregated bandwidth and the lowest carrier in multi-carrier operation.
The term also supports conformance testing. Test houses and equipment vendors need to agree on where the channel starts and ends in order to apply measurement filters and evaluate compliance. The Lower Edge provides that common understanding, reducing ambiguity and improving interoperability across the ecosystem.
What changed in its specifications
The latest release-to-release comparison of specifications that define Lower Edge. Each summary describes the whole specification, not only this term.
Rel-18 adds NR bands n54, n105, n106 and n109 to the BS emission and spurious and blocking requirements in TS 36.104. These entries cover wide-area, local and medium-range base stations.
Full comparison in TS 36.104 →Rel-13 added PUCCH format 4 and 5 performance tests, new operating bands, carrier aggregation band combinations, and four new FDD bands in the 2GHz range.
Full comparison in TS 36.141 →Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Initial definition introduced: 'The lowest frequency in the aggregated channel bandwidth for multiple contiguously aggregated carriers in a specified operating band, or the lowest frequency in the channel bandwidth of a single E-UTRA carrier, or the lowest frequency in the channel bandwidth of the lowest carrier for E-UTRA multi-carrier in a specified operating band; used as a frequency reference point for transmitter and receiver requirements.' This release established the term alongside the introduction of carrier aggregation in LTE.
Defining Specifications
3GPP specifications that define or reference Lower Edge, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.104 vj20 | E-UTRA/NB-IoT Base Station RF Requirements | Rel-19 read |
| TS 36.141 vj10 | RF Test Methods for LTE and NB-IoT Base Stations | Rel-19 read |
| TS 36.808 va10 | LTE Carrier Aggregation BS RF Requirements | Rel-10 read |