Description
The Node B Application Protocol (NBAP) is a key signaling protocol in the UMTS Terrestrial Radio Access Network (UTRAN), operating over the Iub interface between the Radio Network Controller (RNC) and Node B (base station). It is divided into two logical parts: Common NBAP (C-NBAP) and Dedicated NBAP (D-NBAP). C-NBAP handles common procedures related to the entire Node B or cell, such as cell setup, deletion, and broadcast information management. D-NBAP deals with dedicated procedures for individual User Equipments (UEs), including radio link establishment, reconfiguration, and deletion. NBAP messages are transported over ATM or IP, depending on the network implementation, using signaling bearers for reliable delivery.
NBAP works by enabling the RNC to control Node B operations dynamically. For instance, during call setup, the RNC uses D-NBAP to request a radio link with specific parameters like spreading factor and power control settings. Node B responds with confirmation and provides measurement reports on uplink quality, interference, and UE positioning. These reports allow the RNC to make handover decisions and optimize resource allocation. Key components include message types for radio link management, physical channel reconfiguration, and fault management, ensuring that the air interface adapts to traffic conditions and mobility events.
In the network architecture, NBAP plays a central role in radio resource management (RRM), supporting functions like admission control, load balancing, and congestion control. It facilitates soft handovers by coordinating multiple Node Bs for a single UE, enhancing coverage and reliability. The protocol also handles synchronization and timing alignment between Node B and RNC, which is crucial for CDMA-based WCDMA systems. Over releases, NBAP has been extended to support features like HSDPA and HSUPA, integrating new procedures for high-speed data channels while maintaining backward compatibility with earlier UMTS deployments.
Purpose & Motivation
NBAP was created to provide a standardized signaling mechanism for UTRAN, addressing the need for efficient control and coordination between the RNC and Node B in UMTS networks. Prior to UMTS, GSM used the Base Station System Application Part (BSSAP) for similar functions, but the introduction of WCDMA technology required a new protocol to handle CDMA-specific operations like soft handover and dynamic resource allocation. NBAP solves the problem of managing complex radio resources in a spread-spectrum environment, enabling real-time adjustments to radio links based on network conditions.
The protocol's development was motivated by the shift from TDMA to CDMA in 3G, which introduced challenges in interference management and multi-cell coordination. NBAP allows the RNC to centralize control decisions while leveraging Node B for local measurements, distributing intelligence across the RAN. This separation of concerns improves scalability and performance, as the RNC can manage multiple Node Bs efficiently. It also supports the introduction of packet-switched services by facilitating data channel setup and QoS enforcement.
Historically, NBAP filled a gap in 3GPP Release 99, providing the foundation for UTRAN operation. It addressed limitations of earlier protocols by offering flexibility for future enhancements, such as support for advanced antenna systems and higher data rates. Its continued evolution across releases ensures that UMTS networks can integrate new technologies while maintaining reliable voice and data services.
What changed in its specifications
The latest release-to-release comparison of specifications that define NBAP. Each summary describes the whole specification, not only this term.
Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TR 21.905 →Rel-19 brings only minor changes to TS 25.401: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TS 25.401 →Technology family
RAN interfaces · Radio Access Network
- Phase 1 A interface, Abis
- R99 Iu, Iu-BC, Iu-CS, Iu-PS, Iub, Iur, NBAP, Uu
- Rel-5 Iur-g
- Rel-8 S1, S1-MME, S1-U, S1AP, X2
- Rel-15 E1, E1AP, F1, F1-C, F1-U, F1AP, NG, NG-C, NG-U, NGAP, Xn, Xn-C, Xn-U
- NBAP used together with Iub
“Node B Application Part: Radio Network Signalling over the Iub” TS 25.401
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Release Timeline
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 8 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
NBAP is specified for the first time as the radio network layer control plane protocol over Iub between CRNC and Node B, with elementary procedures, common and dedicated procedure classes, and ASN.1 PER encoding.
- “The present document specifies the radio network layer signalling protocol called Node B Application Part (NBAP) specification to be used for Control Plane over Iub Interface.” TS 25.433 v3.14.2
- “NBAP procedures are divided into common procedures and dedicated procedures.” TS 25.433 v3.14.2
- “NBAP shall use the ASN.1 Basic Packed Encoding Rules (BASIC-PER) Aligned Variant as transfer syntax” TS 25.433 v3.14.2
NBAP specification (25433 v4d0) received corrections to an NBAP function and to the ASN.1 of the CELL SYNCHRONISATION RECONFIGURATION REQUEST TDD message.
- “NBAP ASN.1 Corrections for the CELL SYNCHRONISATION RECONFIGURATION REQUEST TDD message” TS 25.433 v4.13.0
- “Correction on NBAP function” TS 25.433 v4.13.0
Rel-5 extends NBAP with new procedures and parameters, including power balancing, HSDPA common procedure changes, and SCTP/IP as an alternative signalling bearer on Iub.
- “Power Balancing Activation with Radio Link Setup and Radio Link Addition procedures in NBAP” TS 25.433 v5.16.0
- “HSDPA NBAP Common Procedure Modifications” TS 25.433 v5.16.0
- “SCTP [7] over IP shall be supported as the transport for NBAP signalling bearer on Iub Interface.” TS 25.432 v5.1.0
NBAP was extended in Rel-6 to support E-DCH/HSUPA, including a capacity consumption law based on the number of E-DPDCHs and their spreading factors, signalled via the Maximum Set of E-DPDCHs IE.
- “The reference spreading factor and number of E-DPDCH is signalled using the Maximum Set of E-DPDCHs IE.” TS 25.433 v6.17.0
- “CR for Introduction of E-DCH in NBAP” TS 25.433 v6.17.0
- “Alignment of NBAP with latest status of EUDCH stage 2 (TS 25.309) and RRC (TS 25.331)” TS 25.433 v6.17.0
Rel-7 extended NBAP with new features, including Continuous Packet Connectivity, MIMO, and downlink and uplink higher order modulation, and also GANSS support.
- “Introduction of Continuous Packet Connectivity in NBAP” TS 25.433 v7.17.0
- “Introduction of MIMO in NBAP” TS 25.433 v7.17.0
- “Introduction of GANSS (Galileo and Additional Navigation Systems) in NBAP” TS 25.433 v7.17.0
NBAP in TS 25.433 gained new capabilities: E-UTRAN measurements, a Common E-DCH resource usage measurement, LCR TDD 64QAM and CPC support, and additional navigation satellite systems.
- “NBAP Support of measurements on E-UTRAN” TS 25.433 v8.14.0
- “New NBAP Measurement on Common E-DCH Resource Usage” TS 25.433 v8.14.0
- “Introduction of Continuous Packet Connectivity in NBAP for LCR TDD” TS 25.433 v8.14.0
NBAP in Rel-9 gained new capabilities, including Rel-9 HSPA capability, DGNSS validity period, and HS-SCCH specification for the BCCH-specific H-RNTI.
- “Introduction of Re9 HSPA Capability into NBAP” TS 25.433 v9.10.0
- “Addition of DGNSS Validity Period in NBAP” TS 25.433 v9.10.0
- “Specify the HS-SCCH used for the BCCH specific H-RNTI at NBAP” TS 25.433 v9.10.0
NBAP in TS 25.433 was extended with MC-HSUPA and MU-MIMO support, including new Multi-Carrier E-DCH capability information elements, plus GNSS enhancements.
- “Introduction of MC-HSUPA to NBAP” TS 25.433 v10.10.0
- “Introduction of MU-MIMO to NBAP” TS 25.433 v10.10.0
- “Addition of Multi-Carrier E-DCH capability IEs for MC-HSUPA to NBAP” TS 25.433 v10.10.0
Defining Specifications
3GPP specifications that define or reference NBAP, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TR 21.905 vj20 | 3GPP Terminology and Definitions | Rel-19 read |
| TS 25.401 vj00 | UTRAN Overall Architecture | Rel-19 read |
| TS 25.430 vj00 | Introduction to Iub Interface Specifications | Rel-19 read |
| TS 25.432 vj00 | Iub NBAP Signalling Transport Specification | Rel-19 read |
| TS 25.433 vj00 | Node B Application Part (NBAP) Protocol | Rel-19 read |
| TS 25.705 vd00 | Small Data Enhancements for UMTS | Rel-13 read |
| TR 25.931 vj00 | UTRAN Signalling Procedures Examples | Rel-19 read |