Description
Time Division Multiple Access (TDMA) is a channel access method for shared-medium networks. It allows several users to share the same frequency channel by dividing the signal into different time slots. The users transmit in rapid succession, one after the other, each using their own time slot. This allows multiple stations to share the same transmission medium (e.g., radio frequency channel) while using only a part of its channel capacity. In the context of 3GPP, TDMA is synonymous with the fundamental frame and burst structure used in the GSM radio interface, which is a TDMA/FDMA hybrid system. The system uses a combination of FDMA (Frequency Division Multiple Access) to create multiple carrier frequencies and TDMA to create multiple time slots on each carrier.
In GSM, the basic TDMA frame is 4.615 ms long and is divided into 8 time slots (or 16 in half-rate configurations). Each time slot, also called a burst period, lasts approximately 577 microseconds. Logical channels (like traffic channels for voice and control channels for signaling) are mapped onto these physical time slots. A mobile station is assigned a specific time slot number on a specific frequency carrier for its uplink and downlink communications. The precise timing is synchronized across the network using synchronization channels and timing advance mechanisms to compensate for propagation delays, ensuring bursts from different mobiles do not overlap at the base station.
TDMA's architecture is central to the GSM air interface, defined in the 04 and 05 series of specifications (now maintained in the 45 series for GSM/EDGE Radio Access Network). Key components include the TDMA frame hierarchy (frames, multiframes, superframes, hyperframes), the different burst types (Normal, Frequency Correction, Synchronization, Access, Dummy), and the associated timing structures. Its role is to provide the structured, time-sliced medium over which all logical channels for voice, data, and signaling are transmitted, forming the backbone of 2G digital voice service and enabling early packet data services like GPRS.
Purpose & Motivation
TDMA was developed to overcome the limitations of purely analog, FDMA-based first-generation (1G) cellular systems. These analog systems allocated one dedicated frequency pair (uplink and downlink) per call for its entire duration, leading to inefficient spectrum use, limited capacity, and vulnerability to eavesdropping and interference. The primary motivation for TDMA was to increase network capacity and enable digital transmission, which offered improved voice quality, security through encryption, and the foundation for data services.
By digitizing voice and splitting the transmission into short, repetitive time slots, TDMA allowed a single radio frequency channel to serve multiple users (typically 8 full-rate or 16 half-rate users) sequentially. This dramatically improved spectral efficiency compared to 1G FDMA. The creation of a digital standard also facilitated the development of advanced network features like authentication, roaming, and SMS. TDMA, as implemented in GSM, solved the critical problem of limited radio spectrum by enabling its more intensive reuse, which was essential for the mass-market adoption of mobile telephony. It established a robust, time-synchronized digital air interface that became the global standard for 2G communications.
What changed in its specifications
The latest release-to-release comparison of specifications that define TDMA. Each summary describes the whole specification, not only this term.
Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.
Full comparison in TR 21.905 →Added a third TDD option at 7.68 Mcps with 10 MHz bandwidth; updated related physical layer descriptions.
Full comparison in TS 25.201 →Technology family
Multiple access and waveforms · Radio Access Network
- Phase 1 FDMA, TDMA
- R99 DS-CDMA, TD-CDMA, WCDMA
- Rel-4 TD-SCDMA
- Rel-8 DFT-s-OFDM, OFDMA, SC-FDMA
- Rel-15 CP-OFDM
- TDMA extended by TD-CDMA
“In UTRA TDD there is TDMA component in the multiple access in addition to DS-CDMA.” TS 25.201
- TDMA counterpart in another generation: WCDMA
“The access scheme is Direct-Sequence Code Division Multiple Access (DS-CDMA) with information either spread over approximately 5 MHz (FDD and 3.84 Mcps TDD) bandwidth, thus also often denoted as Wideband CDMA (WCDMA) due that nature” TS 25.201
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Release Timeline
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
Introduced in Phase 1 (release dating of the term; no individual change cited).
TDMA is specified for the first time in the UTRA TDD physical channels spec, with time slots acting as a TDMA component and a 10 ms TDMA frame of 15 time slots.
- “The time slots are used in the sense of a TDMA component to separate different user signals in the time domain.” TS 25.221 v3.11.0
- “The TDMA frame has a duration of 10 ms and is subdivided into 15 time slots (TS) of 2560*Tc duration each.” TS 25.221 v3.11.0
TDMA is specified in Rel-4 as a codec context: a TDMA EFR Codec Type is added to the codec list for TFO/TrFO interworking, and 1.28Mcps TDD frame text describes a TDMA component.
- “The Supported Codec List IE includes Codec_Types from the TDMA and PDC systems, to support TFO or TrFO between UMTS and TDMA” TS 26.103 v4.4.0
- “5.5 TDMA Enhanced Full Rate Codec Type (TDMA EFR)” TS 26.103 v4.4.0
- “The time slots are used in the sense of a TDMA component to separate different user signals in the time and the code domain.” TS 25.221 v4.8.0
Defining Specifications
3GPP specifications that define or reference TDMA, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TR 21.905 vj20 | 3GPP Terminology and Definitions | Rel-19 read |
| TS 25.201 vj00 | UTRA Physical Layer General Description | Rel-19 read |
| TS 25.221 vj00 | UTRA TDD Physical Layer Specification | Rel-19 read |
| TS 25.222 vj00 | UTRA TDD Multiplexing & Channel Coding | Rel-19 read |
| TS 25.225 vj00 | UTRA TDD Physical Layer Measurements | Rel-19 read |
| TS 26.101 vj00 | Generic frame format for AMR and GSM-EFR speech codecs | Rel-19 read |
| TS 26.102 vj00 | Mapping of AMR and other codecs to interfaces | Rel-19 read |
| TS 26.103 vj00 | 3GPP Codec Lists for OoBTC and TrFO | Rel-19 read |
| TS 26.202 vj00 | AMR-WB Speech Codec Mapping Specification | Rel-19 read |
| TR 26.975 vj00 | AMR Speech Codec Performance Background | Rel-19 read |
| TR 26.978 vj00 | AMR Noise Suppression Selection Phase Technical Report | Rel-19 read |
| TR 45.913 vj00 | Optimized Transmit Pulse Shape for EGPRS2-B | Rel-19 read |
| TS 46.008 vj00 | GSM Half Rate Speech Codec Performance | Rel-19 read |
| TS 46.055 vj00 | GSM Enhanced Full Rate Speech Codec Performance | Rel-19 read |