Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

DS-CDMA

Direct-Sequence Code Division Multiple Access

Radio Access Network →

DS-CDMA is the fundamental 3G UMTS air interface where user data is multiplied by a high-rate pseudo-random code to spread the signal bandwidth, enabling multiple users to share the same frequency band simultaneously.

Introduced
R99
Where
Radio Access Network › UTRAN (3G)
Specifications
3 specs
DS-CDMA Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Direct-Sequence Code Division Multiple Access (DS-CDMA) is the core multiple access scheme for the 3G Universal Mobile Telecommunications System (UMTS) as standardized by 3GPP. It operates by spreading the user's data signal across a wide bandwidth using a unique, high-rate pseudo-random noise (PN) code, known as a spreading code. Each user's data bits are combined (modulo-2 added) with this spreading code, which has a much higher chip rate (e.g., 3.84 Mcps for UMTS) than the original data symbol rate. This process transforms the narrowband data signal into a wideband signal with a noise-like appearance. At the receiver, the same unique code is used to correlate and 'de-spread' the desired signal, collapsing it back to its original bandwidth while spreading any interfering signals (from other users or noise) further, which are then filtered out. This provides processing gain and resistance to narrowband interference.

The architecture of a DS-CDMA system in UMTS involves several key physical layer components. The spreading process is performed by channelization codes (Orthogonal Variable Spreading Factor codes) which separate physical channels from the same source, and scrambling codes (Gold codes or long PN codes) which distinguish different user equipment or NodeBs. The wideband CDMA (WCDMA) air interface uses two 5 MHz paired bands for Frequency Division Duplex (FDD) mode. Key physical channels include the Dedicated Physical Channel (DPCH) for user data and control, the Common Pilot Channel (CPICH) for channel estimation, and synchronization channels. The system employs power control, notably fast closed-loop power control at 1500 Hz, to combat the near-far problem inherent in CDMA, where a strong signal from a nearby user can drown out weaker signals from distant users.

DS-CDMA's role in the 3GPP network is foundational for the UTRAN (UMTS Terrestrial Radio Access Network). It provides the physical layer for both circuit-switched and packet-switched services, supporting variable data rates through the use of different Spreading Factors (SF). The technique inherently supports soft handover, where a UE can communicate with multiple NodeBs simultaneously, improving handover reliability. Its spread spectrum nature also offers inherent security through the obscurity of the spreading codes and provides frequency diversity, making the link robust against multipath fading when combined with a Rake receiver that combines signals from different propagation paths.

Purpose & Motivation

DS-CDMA was developed to fulfill the International Telecommunication Union's (ITU) IMT-2000 requirements for third-generation (3G) mobile systems, which demanded higher data rates, improved spectral efficiency, and support for multimedia services compared to 2G systems like GSM (which used TDMA/FDMA). The primary problem it solved was enabling multiple users to share the same wide frequency band simultaneously without strict time or frequency partitioning, thereby increasing capacity and facilitating a more flexible allocation of bandwidth. Its creation was motivated by the need for a robust air interface that could provide higher capacity in a cellular environment, support variable bit rate services, and enable seamless handovers.

Compared to the TDMA approach of 2G GSM, DS-CDMA offered several theoretical advantages. It provided inherent frequency diversity, making it more resistant to multipath fading and narrowband interference. The use of spreading codes allowed for the soft capacity limit, where adding more users gradually degrades quality for all, rather than creating a hard block. This was crucial for supporting the bursty nature of packet data. Furthermore, it simplified frequency planning as the same frequency can be reused in every cell (frequency reuse factor of 1), unlike GSM which required careful planning to avoid co-channel interference. DS-CDMA formed the basis for the WCDMA FDD mode, which became the globally dominant 3G technology.

What changed in its specifications

The latest release-to-release comparison of specifications that define DS-CDMA. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 25.201Rel-6 → Rel-7

Added a third TDD option at 7.68 Mcps with 10 MHz bandwidth; updated related physical layer descriptions.

Full comparison in TS 25.201 →

Technology family

Multiple access and waveforms · Radio Access Network

  1. Phase 1 FDMA, TDMA
  2. R99 DS-CDMA, TD-CDMA, WCDMA
  3. Rel-4 TD-SCDMA
  4. Rel-8 DFT-s-OFDM, OFDMA, SC-FDMA
  5. Rel-15 CP-OFDM

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 3 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

R99 introduced

TS 25.201 defines the UTRA access scheme as DS-CDMA, with information spread over about 5 MHz bandwidth (WCDMA), and TDD adding a TDMA component.

  • “The access scheme is Direct-Sequence Code Division Multiple Access (DS-CDMA) with information spread over approximately 5 MHz bandwidth” TS 25.201 v3.4.0
  • “In UTRA TDD there is TDMA component in the multiple access in addition to DS-CDMA.” TS 25.201 v3.4.0
Rel-4 specification text

The DS-CDMA access scheme description was extended to cover the 1.28 Mcps TDD option with approximately 1.6 MHz bandwidth (Narrowband CDMA), and UTRA TDD gained a TDMA component alongside DS-CDMA.

  • “or 1.6MHz (1.28Mcps TDD), thus also often denoted as Narrowband CDMA.” TS 25.201 v4.3.0
  • “In UTRA TDD there is TDMA component in the multiple access in addition to DS-CDMA.” TS 25.201 v4.3.0
Rel-7 specification text

The DS-CDMA access scheme description in the UTRA physical layer general spec was extended to include a 10 MHz (7.68 Mcps) TDD option alongside the 3.84 and 1.28 Mcps options.

  • “10MHz (7.68 Mcps TDD) bandwidth, or 1.6MHz (1.28Mcps TDD), thus also often denoted as Narrowband CDMA” TS 25.201 v7.5.0
  • “UTRA TDD has three options, the 3.84Mcps option and the 1.28Mcps option, the 7.68Mcps TDD option.” TS 25.201 v7.5.0

Defining Specifications

3GPP specifications that define or reference DS-CDMA, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 25.201 vj00 UTRA Physical Layer General Description Rel-19 read
TS 25.212 vj00 UTRA FDD Layer 1 Multiplexing & Channel Coding Rel-19 read