Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

FDMA

Frequency Division Multiple Access

Physical Layer →

FDMA is a channel access method where the total available radio spectrum is divided into multiple individual frequency channels, each assigned to a different user for their call or session.

Introduced
Phase 1
Where
Radio Access Network › E-UTRAN (LTE)
Specifications
6 specs
Also in
Services
FDMA Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Frequency Division Multiple Access (FDMA) is one of the fundamental multiple access schemes used in wireless communications to enable multiple users to share a common radio frequency band. In a pure FDMA system, the total allocated system bandwidth is partitioned into numerous narrower, dedicated frequency channels. Each active user or communication session is allocated one of these channels exclusively for the duration of their connection. The user's information signal modulates a carrier frequency corresponding to their assigned channel. All channels are transmitted simultaneously but are separated in the frequency domain, allowing multiple concurrent communications.

From an architectural perspective, an FDMA-based cellular network, such as the first-generation (1G) AMPS or the radio interface of satellite communications, requires precise frequency synthesis and filtering. Each base station is equipped with transceivers tuned to specific channel frequencies. A user equipment (UE) is assigned an uplink channel (for transmission to the base station) and a paired downlink channel (for reception), which is essentially FDD applied per user. The key network components involved are the channel elements in the base station, each handling a specific frequency, and the Mobile Switching Center (MSC) that manages the allocation and handover of these channels as users move between cells.

FDMA works by maintaining strict separation between channels using guard bands—small unused frequency intervals between adjacent channels. These guard bands prevent Inter-Channel Interference (ICI) caused by imperfect transmitter filters and Doppler shifts. When a user initiates a call, the network's control system assigns an available frequency pair. The UE and base station then tune their radios to these frequencies. The communication is continuous for the call's duration, unlike time-slotted systems. This simplicity is both a strength and a weakness; it allows for straightforward implementation but lacks flexibility for bursty data traffic.

In 3GPP systems, pure FDMA is not used as the primary access method for digital cellular standards like GSM, UMTS, LTE, or NR. However, its principles are deeply embedded. GSM, for instance, combines FDMA (dividing 25 MHz into 124 carrier frequencies of 200 kHz each) with TDMA (dividing each frequency into 8 time slots). More importantly, FDMA is the conceptual parent of more advanced frequency-domain techniques. Modern Orthogonal Frequency Division Multiple Access (OFDMA), used in LTE downlink and 5G NR, is a digital, efficient form of FDMA where subcarriers are orthogonal, eliminating the need for guard bands between them and allowing dynamic allocation of groups of subcarriers (resource blocks) to different users.

Purpose & Motivation

FDMA was developed to solve the core problem of enabling multiple users to access a shared, limited radio spectrum resource for mobile communication. Before cellular networks, mobile radio systems were often single-channel or used inefficient manual selection. FDMA provided a systematic, scalable way to divide the spectrum into individual 'conversation lanes,' allowing many users to be served simultaneously within a geographic area. This was the technological foundation for the first commercial cellular networks (1G), making mobile telephony a mass-market service.

The primary problem it addressed was user isolation—preventing one user's signal from interfering with another's. By assigning unique frequency channels, FDMA provided natural, static isolation. This was easier to implement with the analog technology of the 1970s and 1980s compared to more complex time-synchronized or code-based systems. It allowed for continuous transmission, which was ideal for analog voice, providing consistent quality without the choppiness that could arise from time-sharing.

However, FDMA had significant limitations that motivated the evolution to hybrid and digital techniques. It was inefficient for bursty data traffic, as a channel remained allocated even during silent periods. The need for guard bands reduced spectral efficiency. Furthermore, each channel required a dedicated transceiver unit at the base station, increasing cost and complexity. These drawbacks led to the development of TDMA (as in 2G GSM) and CDMA (as in 3G UMTS), which offered greater capacity and flexibility. Nonetheless, the purpose of FDMA as a clear, foundational method for resource partitioning remains historically crucial. Its concepts are immortalized in the frequency-domain resource allocation strategies of all subsequent cellular generations, where the fundamental act of assigning a specific block of spectrum to a user or a cell remains an FDMA principle at its core.

What changed in its specifications

The latest release-to-release comparison of specifications that define FDMA. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 25.222Rel-11 → Rel-12

Rel-12 added HSPA signalling enhancements for more efficient resource usage in LCR, including non-rectangular allocation status for control channelization code indication across timeslots.

Full comparison in TS 25.222 →

Technology family

Multiple access and waveforms · Radio Access Network

  1. Phase 1 FDMA, TDMA
  2. R99 DS-CDMA, TD-CDMA, WCDMA
  3. Rel-4 TD-SCDMA
  4. Rel-8 DFT-s-OFDM, OFDMA, SC-FDMA
  5. Rel-15 CP-OFDM

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 2 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Phase 1 introduced

Introduced in Phase 1 (release dating of the term; no individual change cited).

Rel-15 specification text

GLONASS RTK bias information and a conditional channelNumber field were added for FDMA GLONASS signals in positioning specifications, which specify handling of FDMA signals.

  • “The field is mandatory present if the GLONASS SV indicated by svID broadcasts FDMA signals; otherwise it is not present.” TS 37.355 v15.3.0
  • “This information is applicable only for GLONASS FDMA signals.” TS 36.305 v15.6.0
  • “used by the location server to provide the so-called "GLONASS Code-Phase bias values" (CPB) for up to all FDMA GLONASS observations.” TS 37.355 v15.3.0

Defining Specifications

3GPP specifications that define or reference FDMA, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 25.222 vj00 UTRA TDD Multiplexing & Channel Coding Rel-19 read
TS 36.305 vj00 UE Positioning in E-UTRAN Stage 2 Rel-19 read
TS 36.355 vj00 LTE Positioning Protocol (LPP) Rel-19 read
TS 37.355 vj30 LTE Positioning Protocol (LPP) Rel-19 read
TS 38.305 vj30 NG-RAN UE Positioning Stage 2 Rel-19 read