Description
Ranging/Sidelink Positioning is a feature introduced in 3GPP Release 18 as part of the 5G Advanced evolution. It refers to the Access Stratum (AS) functionality that enables ranging-based services and sidelink positioning, as specified in TS 23.586. Ranging is the process of determining the distance between two or more devices, while sidelink positioning is the process of determining the relative or absolute position of a device using sidelink signals. This functionality is built on the sidelink interface (PC5) and leverages the direct communication capabilities of 5G New Radio (NR) to enable devices to measure distance and position without relying on network infrastructure.
The Ranging/Sidelink Positioning feature is designed to support a wide range of applications, including public safety, industrial IoT, automotive, and consumer services. For example, in public safety, first responders can use ranging to determine the distance between team members or to locate a person in a building. In industrial IoT, ranging can be used for asset tracking, collision avoidance, and precise positioning in factory floors. In automotive, sidelink positioning can enhance cooperative driving by allowing vehicles to determine their relative positions with high accuracy, even in areas without GNSS coverage.
The technical implementation of Ranging/Sidelink Positioning involves several key components. First, the UEs exchange sidelink positioning reference signals (SL-PRS) over the PC5 interface. These signals are designed to allow accurate timing measurements, such as time of arrival (ToA) or round-trip time (RTT). By measuring the time it takes for a signal to travel between two UEs, the distance can be calculated. Multiple measurements between different UEs can be used to determine relative positions through trilateration or multilateration. The positioning calculations can be performed by the UE itself or by a location server (e.g., LMF) if network assistance is available.
The feature is specified in several 3GPP specifications. TS 37.340 (E-UTRAN and NR multi-connectivity) and TS 38.304 (NR UE procedures in idle mode) provide the overall architecture and procedures. TS 38.321 (NR MAC protocol) specifies the MAC layer procedures for sidelink positioning, including the transmission and reception of SL-PRS. TS 38.355 (NR positioning protocol) defines the positioning protocol aspects, including the exchange of positioning assistance data and measurement reports. TS 23.586 provides the service requirements and architecture for ranging-based services, including the interfaces between the UE, the network, and the location server.
Ranging/Sidelink Positioning is a significant enhancement to 5G because it enables high-accuracy positioning without relying on network coverage. Traditional positioning methods, such as GNSS or network-based positioning (e.g., OTDOA), have limitations: GNSS may not be available indoors or in urban canyons, and network-based positioning requires sufficient base station density. Sidelink positioning overcomes these limitations by using direct device-to-device links, which can operate in areas without network coverage and can achieve high accuracy due to the short distances involved. This makes it particularly suitable for critical applications where reliability and accuracy are paramount.
In Release 19, the feature continues to evolve, with further enhancements to accuracy, latency, and scalability. The definition remains unchanged, indicating that the fundamental concept has been stable since its introduction. As 5G Advanced progresses, Ranging/Sidelink Positioning is expected to become an integral part of the 5G ecosystem, enabling new use cases and business models.
Purpose & Motivation
Ranging/Sidelink Positioning was introduced in Release 18 to address the growing demand for accurate positioning in scenarios where traditional methods are insufficient. Traditional positioning technologies, such as GNSS and network-based positioning, have limitations: GNSS requires clear sky visibility and is often unavailable indoors or in dense urban environments; network-based positioning relies on base station signals and may not provide the required accuracy in challenging conditions. Sidelink positioning leverages direct device-to-device communication to overcome these limitations, providing accurate distance and position measurements even in areas without network coverage.
The motivation for this feature comes from several vertical industries. In public safety, first responders need to locate team members and victims in indoor environments where GNSS is unavailable. In industrial IoT, precise positioning is essential for asset tracking, robot navigation, and collision avoidance. In automotive, cooperative driving requires accurate relative positioning between vehicles to enable platooning, cooperative collision avoidance, and autonomous driving. These applications demand high accuracy (sub-meter level), low latency, and high reliability, which sidelink positioning can provide.
Prior to Release 18, 3GPP had already specified sidelink communication for V2X (Vehicle-to-Everything) in Release 14 and later, but positioning was not a native capability. The Release 18 work on ranging and sidelink positioning represents a significant step forward, adding native positioning support to the sidelink interface. This was made possible by the enhanced capabilities of 5G NR, including wider bandwidths, flexible numerology, and advanced antenna systems, which enable precise timing measurements.
The feature also addresses the need for standardised interfaces and protocols to ensure interoperability between devices from different vendors. By specifying the procedures in TS 23.586, TS 37.340, TS 38.304, TS 38.321, and TS 38.355, 3GPP ensures that devices can perform ranging and positioning consistently, regardless of manufacturer. This is crucial for market adoption and for ensuring that the technology can be deployed globally.
In summary, Ranging/Sidelink Positioning exists to provide accurate, reliable, and low-latency positioning in scenarios where traditional methods fall short, enabling new applications and services in public safety, industrial IoT, and automotive domains.
What changed in its specifications
The latest release-to-release comparison of specifications that define Ranging/Sidelink Positioning. Each summary describes the whole specification, not only this term.
Rel-19 adds to TS 37.340 data collection for SON/MDT in NR standalone and MR-DC Phase 4. It covers conditional PSCell addition or change (CPAC/S-CPAC) failure detection and root cause analysis in MN and SN nodes.
Full comparison in TS 37.340 →Rel-19 adds TS 38.304 definitions for multi-hop L2 UE-to-Network sidelink relay roles, including child, parent, intermediate, first and last relay UEs. It also adds paging and system information handling for relays, and NTN IoT Phase 3 text on PLMN access technology restrictions and cell categories.
Full comparison in TS 38.304 →Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Ranging/Sidelink Positioning, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 37.340 vj30 | Overview of Multi-Connectivity Operation using E-UTRA and NR | Rel-19 read |
| TS 38.304 vj30 | NR UE Idle and Inactive State Procedures | Rel-19 read |
| TS 38.321 vj40 | NR MAC Protocol Specification | Rel-19 read |
| TS 38.355 vj20 | Sidelink Positioning Protocol (SLPP) Specification | Rel-19 read |