Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

RX beam peak direction

Receive beam peak direction

Physical Layer →

RX beam peak direction is the direction in which a UE receive beam finds the maximum total RSRP component and thus the best total EIS component, used to evaluate NR beamforming performance.

Introduced
Rel-15
Where
User Equipment
Specifications
4 specs
Also in
Radio Access Network
RX beam peak direction Description Purpose Neighbours Specifications

Description

The RX beam peak direction is a concept defined in 3GPP specifications for New Radio (NR), particularly in TS 38.101 (UE radio transmission and reception), TS 38.521 (UE conformance specification), TS 38.871 (NR UE radiated performance), and TS 38.876 (NR UE radiated performance for FR2). It refers to the direction, relative to the UE antenna array, at which the received signal power is maximized for a given receive beam. More precisely, it is the direction where the maximum total component of Reference Signal Received Power (RSRP) is found, which also corresponds to the best total component of Effective Isotropic Sensitivity (EIS).

In NR, especially in Frequency Range 2 (FR2, mmWave), UEs use phased antenna arrays to form receive beams. The RX beam peak direction is determined by measuring the RSRP across a set of angular directions and identifying the direction that yields the highest total RSRP. This direction is critical for evaluating the UE's receive beamforming capability and for ensuring that the UE can achieve the required sensitivity and throughput in a given channel environment.

The concept is used in radiated performance testing, where the UE is placed in an anechoic chamber and its receive beams are characterized. The EIS is a measure of the minimum received power at which the UE can achieve a specified throughput. The best total component of EIS is found at the RX beam peak direction because the antenna gain is highest in that direction, reducing the required isotropic sensitivity. The RX beam peak direction is therefore a key parameter for verifying that the UE meets the radiated performance requirements defined in 38.871 and 38.876.

In practice, the RX beam peak direction is not a fixed property of the UE; it depends on the beamforming codebook and the beam management procedures. The UE may have multiple receive beams, each with its own peak direction. The network can use beam sweeping and beam refinement to align the transmit and receive beams. The RX beam peak direction is used in conformance testing to ensure that the UE's beamforming implementation is correctly characterized and that the UE can achieve the required performance in realistic propagation conditions.

The term was introduced in Rel-15, the first release of 5G NR, and has been carried forward through Rel-20. Its definition has remained essentially unchanged, reflecting the stability of the beamforming framework in NR. The concept is closely related to other beam management terms such as TX beam peak direction, beam correspondence, and EIS.

Purpose & Motivation

The RX beam peak direction exists to provide a standardized metric for characterizing the receive beamforming performance of NR UEs, particularly in mmWave frequencies where beamforming is essential. Before this concept, there was no consistent way to define and measure the direction of maximum receive sensitivity, which made it difficult to compare UEs and to ensure that they meet regulatory and operator requirements. The RX beam peak direction solves this by defining a clear, measurable quantity: the direction where the total RSRP is maximized and the best EIS is achieved.

The motivation for this concept comes from the unique challenges of mmWave communications. At FR2, path loss is high, and both the base station and the UE must use directional beams to achieve sufficient link budget. The UE's receive beam must be aligned with the incoming signal to maximize gain. The RX beam peak direction provides a reference for this alignment and is used in radiated conformance testing to verify that the UE can achieve the required sensitivity and throughput.

Historically, the RX beam peak direction was introduced in Rel-15 as part of the initial NR specifications. It built upon earlier work on beamforming in LTE and Wi-Fi but was tailored to the specific requirements of NR, including the use of multiple antenna panels and beam management procedures. The concept has remained stable across releases, indicating its fundamental importance and the maturity of the beamforming framework.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-15 Initial

Initial definition introduced: direction where the maximum total component of RSRP and thus best total component of EIS is found. Establishes the metric for NR UE receive beam characterization.

Definition text carried over unchanged from Rel-15; no revision to the RX beam peak direction description.

Definition text carried over unchanged from Rel-16; no revision to the RX beam peak direction description.

Definition text carried over unchanged from Rel-17; no revision to the RX beam peak direction description.

Definition text carried over unchanged from Rel-18; no revision to the RX beam peak direction description.

Definition text carried over unchanged from Rel-19; no revision to the RX beam peak direction description.

Defining Specifications

3GPP specifications that define or reference RX beam peak direction, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.101 vj40 UE Radio Transmission and Reception; Satellite Access Rel-19 read
TS 38.521 vj10 UE Conformance Spec for NR Satellite Access Rel-19 read
TR 38.871 vi20 Technical Report Rel-18 read
TR 38.876 vi20 Technical Report on Air-to-Ground Network for NR Rel-18 read