Description
The SL Reference UE is a functional role in the 3GPP sidelink positioning and ranging architecture defined in TS 23.586. It is a UE that supports the positioning of a Target UE by transmitting and/or receiving reference signals for positioning, providing positioning-related information, and performing other supporting functions using the sidelink interface. In essence, the Reference UE serves as the anchor or measurement counterpart that enables the Target UE's position to be determined relative to known or measurable reference points.
The role is analogous to that of a reference cell or reference transmission point in conventional cellular positioning, but realized entirely over PC5. A Reference UE may transmit SL-PRS (sidelink positioning reference signals) that the Target UE receives and measures, or it may receive SL-PRS transmitted by the Target UE and report measurements. It may also provide positioning-related information such as its own location, timing references, or assistance data that helps the positioning computation. The specific behavior depends on the selected positioning method (for example, time-of-arrival, time-difference-of-arrival, round-trip-time, or angle-based techniques) and on the configuration coordinated by the SL Positioning Server UE.
A single Reference UE can support multiple Target UEs, and a Target UE typically requires measurements from one or more Reference UEs to compute a position. The set of Reference UEs participating in a session is selected as part of the Located UE selection function performed by the SL Positioning Server UE. The Reference UE interacts with the Server UE and other UEs over PC5 to exchange configuration, measurements, and assistance data.
Importantly, the definition allows the SL Reference UE to also act as the SL Positioning Server UE if it supports the required server functionalities. This reflects the flexible, role-based design of the sidelink positioning architecture, where a capable UE can simultaneously serve as a measurement reference and as the coordinator or computation node. Similarly, a UE may act as both Reference and Target in different sessions or even within the same session depending on the method.
The SL Reference UE was introduced in Release 18 as part of the initial sidelink positioning and ranging architecture and was carried forward unchanged into Release 19. It is specified in TS 23.586, with supporting study material in TR 23.700 and stage-3 service descriptions in TS 28.845.
Purpose & Motivation
The SL Reference UE role exists to provide the measurement anchors needed for sidelink positioning. Any positioning method requires references against which a target's location can be determined; in cellular networks these are provided by base stations or reference signals from known locations. In the sidelink domain, where there is no fixed infrastructure, UEs themselves must serve as references. The SL Reference UE formalizes this role so that the architecture can clearly distinguish the entities being located from the entities providing reference signals and positioning-related information.
By defining the Reference UE as a UE that transmits and/or receives reference signals and provides positioning-related information over sidelink, 3GPP enables positioning in scenarios where network infrastructure is unavailable or insufficient, such as out-of-coverage public safety operations, vehicle-to-everything proximity use cases, and industrial device groups. The role also supports flexible measurement topologies, since reference UEs can be selected dynamically based on geometry, capability, and availability.
The explicit provision that a Reference UE can also act as the SL Positioning Server UE reflects the motivation to avoid dedicated infrastructure and to allow capable devices to take on multiple roles. This reduces deployment complexity and improves the resilience of sidelink positioning in dynamic, peer-to-peer environments.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Introduced the SL Reference UE as a UE supporting positioning of a Target UE by transmitting and/or receiving reference signals and providing positioning-related information over sidelink, as part of the initial sidelink positioning and ranging architecture.
Defining Specifications
3GPP specifications that define or reference SL Reference UE, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 23.586 vj00 | Ranging & Sidelink Positioning in 5GS | Rel-19 read |
| TS 23.700 vk10 | AI/ML Application Layer Support Phase 2 | Rel-20 read |
| TR 28.845 vi00 | Technical Report on Charging for Ranging and Sidelink Positioning | Rel-18 read |