Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Total RF bandwidth

Total Radio Frequency Bandwidth

Radio Access Network →

Total RF bandwidth is the maximum sum of Base Station RF Bandwidths across all supported operating bands of a base station, characterizing its overall RF capability and used in RF conformance testing.

Introduced
Rel-11
Where
Radio Access Network › Multi-RAT
Specifications
7 specs
Total RF bandwidth Description Purpose What changed Neighbours Specifications

Description

Total RF bandwidth is a base station capability parameter defined in 3GPP RF conformance specifications. It represents the maximum sum of Base Station RF Bandwidths in all supported operating bands. In other words, if a base station supports multiple operating bands, each with its own RF bandwidth, the Total RF bandwidth is the upper bound on the sum of those individual bandwidths that the base station can simultaneously process.

The concept arises because modern base stations are increasingly multi-band and multi-carrier. A single base station may support several frequency bands (for example, low-band, mid-band, and high-band) and within each band may operate multiple carriers. Each carrier or group of carriers has a Base Station RF Bandwidth, which is the bandwidth over which the base station transmits and receives. The Total RF bandwidth aggregates these across all bands to describe the overall RF processing capability of the equipment.

Total RF bandwidth is used in RF conformance testing as defined in specifications such as TS 25.141 and TS 25.142 (UMTS), TS 36.141 (E-UTRA), TS 37.141 and TS 37.145 (multi-RAT), TS 37.812, and TS 38.141 (NR). These specifications define test procedures and requirements that depend on the declared Total RF bandwidth. For example, transmitter and receiver tests may need to be performed across the full set of supported bands and bandwidths, and the Total RF bandwidth determines the scope and configuration of those tests.

The parameter is closely related to other base station capability parameters such as the maximum number of supported carriers, the supported operating bands, and the Base Station RF Bandwidth per band. It provides a single figure that vendors declare and operators use for planning and procurement. Because it is a maximum, actual instantaneous usage may be lower depending on traffic and configuration.

In multi-RAT base stations that support GSM, UMTS, LTE, and NR simultaneously, the Total RF bandwidth must account for all supported RATs and bands. This makes it a key parameter for ensuring that the base station's RF front-end, filters, and power amplifiers can handle the combined bandwidth without violating emissions or receiver sensitivity requirements.

Purpose & Motivation

Total RF bandwidth exists to provide a standardized, testable characterization of a base station's overall RF capability when it supports multiple operating bands. Earlier single-band base stations could be described simply by their per-band RF bandwidth, but as networks evolved toward multi-band and multi-RAT deployments, a single aggregate parameter became necessary for conformance testing and equipment declaration.

The parameter solves the problem of ambiguity in RF testing scope. Without it, vendors and test labs would have no common basis for determining how many bands and how much bandwidth must be tested together. By defining the maximum sum of Base Station RF Bandwidths across all supported bands, 3GPP ensures that conformance tests cover the worst-case RF configuration.

It also supports operator planning and procurement by giving a clear upper bound on the RF capability of equipment. This helps operators compare products and ensure that deployed base stations can meet current and future capacity needs across their spectrum holdings.

What changed in its specifications

The latest release-to-release comparison of specifications that define Total RF bandwidth. Each summary describes the whole specification, not only this term.

TS 25.141Rel-11 → Rel-12

Rel-12 added L-band for Supplemental Downlink in E-UTRA and UTRA, introducing UTRA band XXXII in 1452–1496 MHz with test and coexistence requirements.

Full comparison in TS 25.141 →
TS 25.142Rel-10 → Rel-11

Added MB-MSR multi-band/multi-carrier RF requirements and test configurations; updated E-UTRA and MSR medium range/local area BS class requirements; added eight-carrier HSDPA multi-carrier transmission statements and terms; added new TDD 1.28Mcps multiple-cell demodulation test terms.

Full comparison in TS 25.142 →

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-11 Initial

Initial definition introduced: the maximum sum of Base Station RF Bandwidths in all supported operating bands. Establishes the parameter for multi-band base station RF conformance.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged.

Definition carried over unchanged.

Defining Specifications

3GPP specifications that define or reference Total RF bandwidth, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 25.141 vj00 UTRA FDD Base Station RF Conformance Testing Rel-19 read
TS 25.142 vj00 UTRA TDD Base Station RF Test Methods Rel-19 read
TS 36.141 vj10 RF Test Methods for LTE and NB-IoT Base Stations Rel-19 read
TS 37.141 vj40 RF Test Methods and Conformance for Multi-Standard Radio Base Stations Rel-19 read
TS 37.145 vj40 AAS Base Station Radiated Requirements Rel-19 read
TS 37.812 vb30 Multi-Band MSR BS Requirements Rel-11 read
TS 38.141 vj40 BS Conformance Testing (TR 38.141) Rel-19 read