Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Services

UL-TDOA

Uplink Time Difference of Arrival

Services →

UL-TDOA is a network-based positioning method where the time differences of a UE's uplink signal arriving at multiple receivers are used to calculate the device's location.

Introduced
Rel-16
Where
Radio Access Network › NG-RAN (5G)
Specifications
3 specs
UL-TDOA Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

Uplink Time Difference of Arrival (UL-TDOA) is a network-centric positioning technique standardized in 3GPP for 5G NR and LTE-M/NB-IoT. Unlike downlink-based methods like Observed Time Difference of Arrival (OTDOA) where the UE measures signals from multiple base stations, in UL-TDOA the measurement burden is on the network. The target UE is instructed by the network (via the Location Management Function - LMF) to transmit a specific positioning reference signal, the Uplink Positioning Reference Signal (UL-PRS) in NR or a similar sounding signal (like SRS configured for positioning).

Multiple receiving nodes, which can be the serving gNB and several neighboring gNBs, capture this uplink transmission. Each receiving node, synchronized to a common time reference (like GPS or network synchronization), precisely timestamps the arrival of the signal. The fundamental measurement is the Time of Arrival (TOA). The LMF, which collects these TOA measurements from all participating receivers, then calculates the Time Difference of Arrival (TDOA) between pairs of receivers. Each TDOA measurement defines a hyperbolic line (or surface in 3D) on which the UE must be located, as the difference in distance to two receivers is constant (speed of light * TDOA).

By combining TDOA measurements from at least three receivers (resulting in two independent TDOA pairs), the LMF can solve for the UE's 2D position through hyperbolic trilateration. For 3D positioning, measurements from four or more receivers are needed. The accuracy of UL-TDOA depends critically on the synchronization accuracy between the receiving nodes, the bandwidth of the transmitted signal (which affects time resolution), the geometry of the receivers relative to the UE (Dilution of Precision - DOP), and the ability to accurately detect the first arriving path in multipath-rich environments. Advanced techniques like multilateration and data fusion with other methods (e.g., Assisted GNSS, downlink TDOA) are used to improve accuracy and reliability.

Purpose & Motivation

UL-TDOA was developed to meet the stringent regulatory and commercial requirements for accurate device location in 5G networks, particularly for emergency services (E911/E112), asset tracking, and IoT applications. While downlink methods like OTDOA are prevalent, they have limitations, especially for devices with limited receiver capabilities (e.g., low-cost IoT modules) or in environments where downlink signals are weak.

The primary motivation for UL-TDOA is to shift the complexity of precise signal measurement from the device to the network infrastructure. This is advantageous for several reasons. First, it enables positioning of devices that lack sophisticated measurement capabilities or are in power-saving modes where frequent downlink measurement is prohibitive. The device only needs to transmit a single, configured signal. Second, network receivers (gNBs) typically have better synchronization (via GNSS or precise network timing protocols), more stable clocks, and more advanced signal processing capabilities than UEs, potentially leading to more accurate and reliable time measurements.

Furthermore, UL-TDOA complements other positioning methods to provide redundancy and improved availability. In scenarios like indoor or dense urban environments where satellite (GNSS) signals are unavailable, UL-TDOA can provide a fallback or hybrid solution. It also addresses use cases where the network needs to locate a device without its active cooperation beyond transmitting the requested signal, which can be relevant for security or network management purposes. Its introduction in Rel-16 was part of a broader 5G positioning framework aimed at achieving meter-level or even sub-meter-level accuracy to support new vertical industry applications.

What changed in its specifications

The latest release-to-release comparison of specifications that define UL-TDOA. Each summary describes the whole specification, not only this term.

TS 38.305Rel-18 → Rel-19

Rel-19 adds enhanced NR topology support to TS 38.305, including WAB-gNB, updated definitions and gNB-to-LMF information transfer. It also includes two further related items.

Full comparison in TS 38.305 →

Technology family

Positioning methods · Radio Access Network › Multi-RAT

  1. R98 E-OTD
  2. R99 A-GPS, OTDOA-IPDL
  3. Rel-9 A-GNSS, E-CID, OTDOA
  4. Rel-16 DL-AoD, DL-TDOA, Multi-RTT, NR E-CID, UL-AoA, UL-TDOA

Also in this family (introduction release not pinned to a single defining specification): U-TDOA

  • UL-TDOA counterpart in another generation: U-TDOA
    “In the UL-TDOA positioning method, the UE position is estimated based on UL-RTOA (and optionally UL-SRS-RSRP and/or UL-SRS-RSRPP and/or UL-RSCP) measurements taken at different TRPs of uplink radio signals from UE, along with other configuration information.” TS 38.305

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 4 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-16 introduced

NR UL-TDOA positioning is specified for the first time in TS 38.305, with UL-RTOA measurements at multiple RPs sent to the LMF and procedures in clause 8.13.

  • “The UL-TDOA positioning method makes use of the UL-RTOA (and optionally UL-SRS-RSRP) at multiple RPs of uplink signals transmitted from UE.” TS 38.305 v16.10.0
  • “8.13 UL-TDOA positioning” TS 38.305 v16.10.0
  • “The procedures described in this clause support UL-TDOA positioning measurements obtained by the gNB and provided to the LMF using NRPPa.” TS 38.305 v16.10.0
Rel-17 specification text

UL-TDOA gained optional UL-SRS-RSRPP measurements, UE Tx TEG reporting via UE Positioning Assistance Information, and a procedure for the gNB to provide the UE TxTEG to the LMF.

  • “makes use of the UL-RTOA (and optionally UL-SRS-RSRP and/or UL-SRS-RSRPP) at multiple RPs of uplink signals transmitted from UE” TS 38.305 v17.8.0
  • “The UE Positioning Assistance Information procedure is used by UE to report the UE Positioning Assistance Information for UL-TDOA.” TS 38.305 v17.8.0
  • “requesting the TxTEG of the UE for NR UL-TDOA positioning” TS 38.305 v17.8.0
Rel-18 specification text

UL-TDOA was extended in Rel-18 with optional UL-RSCP measurements, bandwidth aggregation of received uplink signals, SRS bandwidth aggregation and frequency hopping for RedCap, and UL carrier phase measurement support.

  • “The RPs may optionally use bandwidth aggregation of received uplink signals in order to perform measurements on a wider effective” TS 38.305 v18.8.0
  • “UL carrier phase measurement is supported as specified in clause 9.2.92 of TS 38.455 [27] for UL-TDOA.” TS 38.305 v18.8.0
  • “For RedCap UE, SRS for positioning frequency hopping for UL-TDOA measurements is supported as specified in clause 6.2.1.4.1 of TS 38.214 [57].” TS 38.305 v18.8.0
Rel-19 1 CR

Rel-19 adds data collection procedures for gNB-side model UL-TDOA measurement inference (AI/ML-assisted positioning) and corrects the SSB configuration in UL-TDOA positioning.

  • “data collection e.g., to support NG-RAN node assisted positioning with gNB-side model for UL-TDOA measurement inference are described in Clause 7.15” TS 38.305 v19.3.0
  • Correction on SSB configuration in UL-TDOA and UL-AoA positioning TS 38.305CR0204

Defining Specifications

3GPP specifications that define or reference UL-TDOA, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.305 vj30 NG-RAN UE Positioning Stage 2 Rel-19 read
TS 38.855 vg00 Study on NR Positioning Support Rel-16 read
TR 38.857 vh00 Study on NR Positioning Enhancements Rel-17 read