Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Physical Layer

SRS

Sounding Reference Signal

Physical Layer →

SRS is an uplink reference signal transmitted by a User Equipment to allow the base station (gNB/eNB) to estimate uplink channel quality over a specific bandwidth for scheduling, link adaptation, and advanced antenna techniques.

Introduced
Rel-8
Where
Radio Access Network › NG-RAN (5G)
Specifications
47 specs
Also in
User Equipment, Services
SRS Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

The Sounding Reference Signal (SRS) is a known sequence transmitted by the UE on the uplink physical layer. Unlike data or control signals, its primary purpose is not to carry information but to 'sound' the channel. The gNB (in NR) or eNB (in LTE) uses the received SRS to estimate the uplink channel state information (CSI), including characteristics like frequency response and spatial properties. This estimation is performed over the bandwidth configured for the SRS transmission, which can be wideband (covering a large portion of the carrier) or narrowband (a specific subband).

The transmission of SRS is configurable by the network via RRC signaling and/or MAC CE and DCI. Key configurable parameters include periodicity, time/frequency resource allocation (comb structure and bandwidth), sequence cyclic shift, and transmission comb. A crucial feature introduced in LTE-Advanced and enhanced in NR is antenna switching SRS, where a UE with multiple transmit antennas can sound using different antennas across different SRS symbols or subframes, allowing the base station to learn the uplink channel for each antenna port. This supports uplink transmit diversity and MIMO. In NR, SRS functionality has been significantly expanded. It supports flexible positioning across the OFDM symbol (front-loaded or rear-loaded), wider bandwidths, and multi-symbol transmission within a slot. NR also introduced the concept of SRS resource sets, allowing for grouped configurations for different purposes like codebook-based transmission, non-codebook-based transmission, antenna switching, and beam management.

How it works: The network configures the UE with SRS resources. At the configured time, the UE generates the SRS sequence based on its parameters and transmits it. The gNB receives this known sequence and, by comparing it with the locally generated version, can estimate how the uplink channel has altered the signal. This channel estimate is then used for several critical functions: 1) Uplink channel-aware scheduling, allocating resources to UEs with favorable channel conditions; 2) Uplink link adaptation, selecting the appropriate MCS; 3) For frequency-selective scheduling, determining which subbands are best for a particular UE; and 4) For uplink multi-user MIMO (UL-MU-MIMO), determining which UEs can be spatially multiplexed on the same resources without excessive interference. In NR, SRS also plays a vital role in beam management for uplink beamforming, especially in FR2 (mmWave) bands.

Purpose & Motivation

The SRS was created to address a fundamental asymmetry in early LTE design: while the downlink had dedicated reference signals (CRS) for channel estimation, the uplink lacked a dedicated, UE-specific channel sounding mechanism for wideband or spatial channel estimation. Initial LTE (Rel-8) relied on demodulation reference signals (DM-RS) associated with PUSCH for data decoding, but these only provided channel estimates for the scheduled bandwidth, limiting the network's knowledge for future scheduling decisions and advanced antenna techniques.

The introduction of SRS in LTE Rel-9 solved this problem by providing a configurable, network-controlled mechanism for the base station to proactively learn the uplink channel state. This enabled uplink frequency-selective scheduling, improving spectral efficiency. The primary motivation evolved with LTE-Advanced and NR: to support uplink MIMO and multi-antenna techniques. Without SRS, the base station cannot accurately estimate the spatial characteristics of the uplink channel from multiple UE antennas, which is essential for precoding, spatial multiplexing, and beamforming. SRS thus became the enabler for advanced features like uplink multi-user MIMO (MU-MIMO), where multiple UEs share the same time-frequency resources, and for efficient operation in higher frequency bands where beam-based operation is critical. It transformed the uplink from a largely blind scheduling process to a channel-aware, optimized one.

What changed in its specifications

The latest release-to-release comparison of specifications that define SRS. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →
TS 26.522Rel-18 → Rel-19

Rel-19 added new RTP header extensions for marking data bursts and expedited transfer, plus PSI guidelines for H.265 tiles and MID extension handling.

Full comparison in TS 26.522 →

Technology family

MIMO and beam management · Radio Access Network › NG-RAN (5G)

  1. R99 Transmit diversity, TSTD
  2. Rel-7 MIMO
  3. Rel-8 CSI, DM-RS, MU-MIMO, PMI, RI, SDMA, SRS, SU-MIMO, TPMI
  4. Rel-10 CSI-RS, NZP CSI-RS
  5. Rel-11 CoMP, CSI-IM, QCL, UL CLTD, UL MIMO
  6. Rel-13 CRI, FD-MIMO
  7. Rel-15 Beam Level Mobility, Beam management, BFD, BFD-RS, BFR, PT-RS, TCI, ZP CSI-RS
  8. Rel-18 CJT

Also in this family (introduction release not pinned to a single defining specification): Beamforming

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 10 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

Rel-8 introduced

Introduced in Rel-8 (release dating of the term; no individual change cited).

Rel-11 1 CR

The optionality of CSI/SRS transmission during the transient state was removed in the MAC specification, changing the UE's SRS transmission behaviour.

  • Removing optionality on CSI/SRS transmission during transient state TS 36.321CR0629
Rel-13 1 CR

The SRS request field in DCI format 1A was corrected for Rel-13 LAA, changing how the SRS request is specified in downlink control signalling.

  • Correction on SRS request field in DCI format 1A for Rel-13 LAA TS 36.212CR0219
Rel-14 2 CRs

SRS switching was introduced into TS 36.212 in Rel-14, with a correction to the number of SRS symbols used for UCI multiplexing.

  • Introduction of SRS switching into 36.212 TS 36.212CR0237
  • Correction on number of SRS symbol for UCI multiplexing TS 36.212CR0276
Rel-15 1 CR

SRS gained specified NR behaviour in Rel-15: aperiodic SRS triggering via DCI SRS request, SRS resource sets for codebook and non-codebook PUSCH, and RRC SRS release and configuration.

  • “If aperiodic SRS is configured for a UE, the SRS request field in DCI triggers the transmission of aperiodic SRS resources.” TS 38.214 v15.16.0
  • “Upon receiving an SRS release request from lower layers, for all bandwidth parts of an indicated serving cell the UE shall:” TS 38.331 v15.30.0
  • Correction to frequency-domain starting position for SRS resource mapping TS 38.211CR0009
Rel-16 specification text

Rel-16 extends SRS with carrier based switching on carriers without PUCCH/PUSCH, SRS-RSRP measurement for CLI, SRS request in DCI formats 0_2/1_2, and SRS for positioning signalling.

  • “SRS transmission can be configured on a carrier not configured for PUCCH/PUSCH transmission.” TS 38.133 v16.29.0
  • “The SRS resources defined in Clause 6.4.1.4 of [4, TS 38.211] may be configured for SRS-RSRP measurement for CLI” TS 38.214 v16.17.0
  • “request the NG-RAN node to activate semi-persistent or trigger aperiodic UL SRS transmission by the UE” TS 38.455 v16.16.0
Rel-17 1 CR

Rel-17 extends SRS: positioning SRS transmission in RRC_INACTIVE with TA validation, multiple aperiodic SRS resource sets, and new SRS configuration fields and signalling.

  • “the UE is allowed to transmit the SRS using the timing derived using the latest available NTAN_{\text{TA}} value” TS 38.133 v17.23.0
  • “TAT value for SRS for positioning transmission during RRC_INACTIVE state as specified in TS 38.321 [3].” TS 38.331 v17.18.0
  • CR on power control parameters for multiple aperiodic SRS resource sets TS 38.214CR0395
Rel-18 1 CR

Rel-18 extends SRS for positioning in RRC_INACTIVE (validity area, TA validation, bandwidth aggregation) and adds SRS-related requirements, RRC configuration, NRPPa signalling and many SRS corrections.

  • “apply the SRS for positioning configuration in RRC_INACTIVE and instruct MAC to start the inactivePosSRS-TimeAlignmentTimer;” TS 38.331 v18.11.0
  • “the NG-RAN node shall, if supported, activate the indicated SRS resource set(s) in the UE.” TS 38.455 v18.9.0
  • CR for dropping rule on SRS bandwidth aggregation TS 38.214CR0569
Rel-19 1 CR

Rel-19 extends SRS behaviour: SRS port grouping and 3Tx operation, SRS frequency hopping for non-RedCap UEs, ATG SRS antenna port switching requirements, and new UL SRS time-domain channel timing and power measurements.

  • “Indicates that SRS port grouping is enabled.” TS 38.331 v19.4.0
  • Introduction on the SRS frequency hopping for non-RedCap UE in 38331 [Pos_SRSHop] TS 38.331CR5290
  • “The ATG UE shall perform SRS antenna port switching only if the below conditions are met.” TS 38.133 v19.6.0
Rel-20 2 CRs

SRS-related requirements in TS 38.133 were corrected: SRS antenna port switching test cases were fixed and SRS configuration in UL Tx switching test cases was updated.

  • Correction to SRS antenna port switching test cases_R20 TS 38.133CR6860
  • Update SRS configuration in UL Tx switching test cases TS 38.133CR6965

Defining Specifications

3GPP specifications that define or reference SRS, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read
TS 26.522 vj40 RTP for XR in 5G Systems Rel-19 read
TS 26.565 vj00 Split Rendering Media Service Enabler Rel-19 read
TS 26.854 vj10 Haptics Enhanced Media Streaming and Communication Rel-19 read
TS 28.552 vk40 5G Network Performance Measurements Rel-20 read
TS 36.111 vj00 LMU Requirements for UTDOA Positioning Rel-19 read
TS 36.112 vj00 E-UTRAN LMU Conformance Requirements Rel-19 read
TS 36.141 vj10 RF Test Methods for LTE and NB-IoT Base Stations Rel-19 read
TS 36.211 vj30 E-UTRA Physical Layer Specifications Rel-19 read
TS 36.212 vj30 E-UTRA Physical Layer Procedures Rel-19 read
TS 36.213 vj50 LTE Physical Layer Procedures Rel-19 read
TS 36.214 vj00 E-UTRA Physical Layer Measurements Rel-19 read
TS 36.302 vj00 E-UTRA Physical Layer Services Rel-19 read
TS 36.321 vj30 E-UTRA MAC Protocol Specification Rel-19 read
TS 36.455 vj00 LTE Positioning Protocol Annex (LPPa) Rel-19 read
TS 36.459 vj00 SLmAP for E-UTRAN Positioning Rel-19 read
TS 36.521 vj11 E-UTRA UE Conformance Testing for Satellite Access Rel-19 read
TS 36.855 vd00 LTE Positioning Enhancements Study Rel-13 read
TS 37.355 vj30 LTE Positioning Protocol (LPP) Rel-19 read
TS 37.857 vd10 Indoor Positioning Enhancements for UTRA and LTE Rel-13 read
TR 37.910 vj00 5G SRIT and NR RIT Self-Evaluation Report Rel-19 read
TS 38.101 vj40 UE Radio Transmission and Reception; Satellite Access Rel-19 read
TS 38.133 vk10 NR Radio Resource Management Requirements Rel-20 read
TS 38.174 vk00 NR Integrated Access and Backhaul Requirements Rel-20 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read
TS 38.201 vj00 NR Physical Layer General Description Rel-19 read
TS 38.202 vj00 5G NR Physical Layer Services Rel-19 read
TS 38.211 vj50 NR Physical Channels and Signals Rel-19 read
TS 38.212 vj40 NR Multiplexing and Channel Coding Rel-19 read
TS 38.213 vj50 NR Physical Layer Control Procedures Rel-19 read
TS 38.214 vj50 NR Physical Layer Data Channel Procedures Rel-19 read
TS 38.215 vj40 NR Physical Layer Measurements Rel-19 read
TS 38.300 vj40 NR and NG-RAN Overall Description Rel-19 read
TS 38.305 vj30 NG-RAN UE Positioning Stage 2 Rel-19 read
TS 38.331 vj40 NR Radio Resource Control (RRC) Rel-19 read
TS 38.455 vj30 NR Positioning Protocol A Rel-19 read
TS 38.521 vj10 UE Conformance Spec for NR Satellite Access Rel-19 read
TS 38.522 vk00 NR UE Conformance Test Applicability Rel-20 read
TS 38.523 vj40 UE Conformance Specification for 5G NR Rel-19 read
TS 38.807 vg10 NR beyond 52.6 GHz Study Rel-16 read
TR 38.820 vg10 NR; 7-24 GHz Frequency Range Study Rel-16 read
TS 38.843 vj00 Study on AI/ML for NR Air Interface Rel-19 read
TR 38.857 vh00 Study on NR Positioning Enhancements Rel-17 read
TR 38.859 vi10 Technical Report Rel-18 read
TS 38.863 vk00 NR NTN RF Coexistence Requirements Rel-20 read
TR 38.889 vg00 NR-based access to unlicensed spectrum study Rel-16 read
TR 38.912 vj00 Study on New Radio Access Technology Rel-19 read