Description
Single User Multiple Input Multiple Output (SU-MIMO) is a core physical layer technology in 3GPP standards, primarily defined for LTE and NR. It operates by equipping both the base station (eNodeB in LTE, gNB in NR) and the user equipment (UE) with multiple antennas to create multiple parallel spatial channels, known as layers or streams. The fundamental principle is spatial multiplexing, where independent data streams are transmitted simultaneously from different antenna ports, exploiting the spatial dimension of the radio channel. The number of layers is limited by the minimum of the number of transmit and receive antennas, and the rank of the channel matrix, which is reported by the UE through Channel State Information (CSI) feedback, including the Rank Indicator (RI).
The operation of SU-MIMO involves several key procedures. The base station schedules the UE and determines the precoding matrix, which maps the data layers onto the physical antenna ports, based on UE feedback. This precoding aims to direct energy towards the UE and manage inter-stream interference. The UE uses advanced signal processing, such as Minimum Mean Square Error (MMSE) or Maximum Likelihood (ML) detection, to separate and decode the multiple overlapping streams received on its antennas. This separation relies on the spatial characteristics (eigenvalues and eigenvectors) of the propagation channel. In closed-loop SU-MIMO, the UE provides Precoding Matrix Indicator (PMI) feedback to assist the base station in selecting the optimal precoder from a predefined codebook.
SU-MIMO is a critical component of the downlink and uplink transmission schemes. In the downlink, it is a primary method for achieving high peak data rates for a single user, especially in favorable channel conditions with high signal-to-interference-plus-noise ratio (SINR) and rich scattering. In the uplink, Uplink SU-MIMO allows the UE to transmit multiple streams, increasing uplink capacity. The technology's performance is tightly integrated with other radio resource management functions like adaptive modulation and coding (MCS selection), hybrid automatic repeat request (HARQ), and link adaptation. While SU-MIMO focuses on a single user, it coexists with Multi-User MIMO (MU-MIMO), where the base station serves multiple users on the same time-frequency resources using spatial separation, with SU-MIMO often being the baseline mode before MU-MIMO scheduling is considered.
Purpose & Motivation
SU-MIMO was introduced to address the fundamental challenge of increasing data rates and spectral efficiency within the limited and expensive radio spectrum. Prior to MIMO techniques, systems relied on Single Input Single Output (SISO), which offered limited data rates constrained by Shannon's theorem for a single channel. The explosion of mobile data demand, driven by smartphones and internet services, necessitated a breakthrough. SU-MIMO provides this by leveraging multiple antennas to create parallel spatial channels, effectively multiplying the data rate without requiring additional spectrum bandwidth.
The creation of SU-MIMO was motivated by theoretical advances in information theory, notably the work on MIMO capacity by Telatar and Foschini, which showed that capacity could scale linearly with the minimum number of antennas. 3GPP standardized SU-MIMO in LTE Release 8/9 to fulfill IMT-Advanced requirements for 4G, which mandated significant peak spectral efficiency gains. It solved the problem of how to deliver high-speed data services like mobile video and broadband in a spectrally efficient manner. While earlier concepts existed, SU-MIMO's integration into a practical cellular standard involved solving complex implementation challenges like channel estimation, feedback overhead, and receiver complexity.
SU-MIMO also laid the groundwork for more advanced multi-antenna techniques. It established the necessary framework for channel feedback (CQI, PMI, RI), reference signal design (CSI-RS), and control signaling that later enabled MU-MIMO and massive MIMO. Its purpose evolved from providing peak rate enhancements to also improving reliability and coverage through transmit diversity modes (a subset of MIMO). In essence, SU-MIMO transformed the physical layer from a single-dimensional (time/frequency) system into a multi-dimensional (time/frequency/space) one, unlocking orders of magnitude higher data capacities for cellular networks.
What changed in its specifications
The latest release-to-release comparison of specifications that define SU-MIMO. Each summary describes the whole specification, not only this term.
Rel-19 adds multi-hop L2 UE-to-Network relay for NR sidelink as the largest item. It also adds low-power wake-up signal and receiver (LP-WUS/WUR) text, on-demand SSB and SIB1 for network energy savings, and sub-band full duplex for TDD carriers.
Full comparison in TS 38.300 →Technology family
MIMO and beam management · Radio Access Network › NG-RAN (5G)
- R99 Transmit diversity, TSTD
- Rel-7 MIMO
- Rel-8 CSI, DM-RS, MU-MIMO, PMI, RI, SDMA, SRS, SU-MIMO, TPMI
- Rel-10 CSI-RS, NZP CSI-RS
- Rel-11 CoMP, CSI-IM, QCL, UL CLTD, UL MIMO
- Rel-13 CRI, FD-MIMO
- Rel-15 Beam Level Mobility, Beam management, BFD, BFD-RS, BFR, PT-RS, TCI, ZP CSI-RS
- Rel-18 CJT
Also in this family (introduction release not pinned to a single defining specification): Beamforming
- SU-MIMO builds on MIMO
“When a MIMO channel is solely assigned to a single UE, it is known as SU-MIMO.” TS 36.300
- SU-MIMO coexists with MU-MIMO
“Spatial division multiplexing of modulation symbol streams to different UEs using the same time-frequency resource, also referred to as MU-MIMO, is also supported.” TS 36.300
Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.
Release Timeline
Detected Changes Across Releases
verified against 3GPP sourcesDocumented changes in 2 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.
Introduced in Rel-8 (release dating of the term; no individual change cited).
NR specification 38.300 first defines SU-MIMO, with closed-loop DMRS-based spatial multiplexing for PDSCH, up to 8 DL DMRS ports per UE, and one or two codewords depending on layer count.
- “Up to 8 orthogonal DL DMRS ports per UE are supported for SU-MIMO and up to 4 orthogonal DL DMRS ports per UE are supported for MU-MIMO.” TS 38.300 v15.23.0
- “The number of SU-MIMO code words is one for 1-4 layer transmissions and two for 5-8 layer transmissions.” TS 38.300 v15.23.0
Defining Specifications
3GPP specifications that define or reference SU-MIMO, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 36.747 ve00 | Enhanced CRS and SU-MIMO IM Performance Requirements | Rel-14 read |
| TR 36.912 vj00 | TR on LTE-Advanced (Further E-UTRA) | Rel-19 read |
| TS 38.300 vj40 | NR and NG-RAN Overall Description | Rel-19 read |
| TR 38.838 vh00 | Study on XR Evaluations for NR | Rel-17 read |