Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

UTRA-TDD

Universal Terrestrial Radio Access Time Division Duplex

Radio Access Network →

UTRA-TDD is the collective term for the UTRA TDD modes, encompassing both narrowband and wideband options for operation in unpaired spectrum.

Introduced
R99
Where
Services
Specifications
1 specs
UTRA-TDD Description Purpose What changed Family Neighbours Detected Changes Specifications

Description

UTRA-TDD (Universal Terrestrial Radio Access Time Division Duplex) is a comprehensive term that refers to the time division duplexing radio access modes within the UTRA family. As defined in 3GPP TS 21.905, it is the 'Time Division Duplex UTRA Radio access mode (Includes UTRA-NTDD and UTRA-WTDD)'. This umbrella term covers two distinct variants: UTRA-NTDD (narrowband TDD, 1.28 Mcps) and UTRA-WTDD (wideband TDD, 3.84 Mcps). Both variants share the fundamental principle of using a single frequency carrier for both uplink and downlink, with transmission directions separated in time. This allows operation in unpaired spectrum, which is particularly advantageous when paired spectrum is scarce or when traffic is asymmetric.

In UTRA-TDD, the physical layer is based on a combination of time division multiple access (TDMA) and code division multiple access (CDMA). The radio frame is divided into time slots, each of which can be allocated to either uplink or downlink transmission. The allocation can be dynamically adjusted to match traffic demands, making TDD efficient for services with variable uplink/downlink ratios, such as web browsing or video streaming. The frame structure differs between the narrowband and wideband options. UTRA-NTDD uses a 10 ms frame with two 5 ms subframes, each containing seven time slots plus special slots for synchronization and guard periods. UTRA-WTDD uses a 10 ms frame with 15 time slots, similar to FDD but with time-division duplexing. Both options employ spreading codes to separate users within a time slot.

The term UTRA-TDD is often used in system information broadcasts and capability signaling to indicate that a network or device supports TDD operation. It is also used in specifications for mobility procedures, where handovers between TDD and FDD modes are defined. The inclusion of both NTDD and WTDD under a single term simplifies references when the distinction between the two is not critical. However, when specific characteristics are important, the individual terms are used.

UTRA-TDD operates within the UMTS Terrestrial Radio Access Network (UTRAN), which includes NodeBs and Radio Network Controllers (RNCs). The RNC manages radio resources, including the allocation of time slots to uplink or downlink, and handles mobility across different modes. The NodeB implements the physical layer, including modulation, spreading, and power control. UTRA-TDD supports various data rates and QoS classes, and it can be combined with other UTRA modes for multi-mode operation.

Although UTRA-TDD has not been as widely deployed as UTRA-FDD, it remains an integral part of the 3GPP standards. The term is maintained in TS 21.905 to provide a clear, standardized reference for all stakeholders. Understanding UTRA-TDD is essential for engineers working with legacy 3G networks, as it represents an important alternative to FDD and demonstrates the flexibility of the UTRA framework in accommodating different spectrum and service requirements.

Purpose & Motivation

The UTRA-TDD term was created to provide a unified label for the time division duplexing modes in UTRA, which include both narrowband and wideband variants. The primary motivation was to enable operation in unpaired spectrum, addressing regulatory and practical constraints where paired spectrum is not available. By allowing both uplink and downlink to share the same frequency, TDD offers flexibility in spectrum usage and can adapt to asymmetric traffic patterns more efficiently than FDD.

The term also simplifies documentation and signaling. When referring to TDD operation in general, specifications can use UTRA-TDD without listing both NTDD and WTDD. This reduces verbosity and potential confusion. In system information, the network can indicate that it supports UTRA-TDD, and the UE can then determine which specific variant is in use from other parameters. The definition in TS 21.905 ensures that all parties have a common understanding.

Historically, UTRA-TDD was introduced alongside UTRA-FDD in the early UMTS specifications, but the umbrella term was formalized in Release 5 when the narrowband variant was added. Since then, it has been maintained across all releases, reflecting the continued relevance of TDD in the 3GPP ecosystem. Even as newer technologies like LTE and NR introduce their own TDD variants, the UTRA-TDD term remains a stable part of the 3GPP vocabulary.

What changed in its specifications

The latest release-to-release comparison of specifications that define UTRA-TDD. Each summary describes the whole specification, not only this term.

TR 21.905Rel-17 → Rel-18

Rel-18 brings only minor changes to TS 21.905: 0 clauses changed, with no change attributed to a release feature.

Full comparison in TR 21.905 →

Technology family

Radio access technologies · Radio Access Network

  1. Phase 1 GSM
  2. R97 GPRS
  3. R99 EDGE, EGPRS, UTRA, UTRA-FDD, UTRA-TDD, UTRA-WTDD
  4. Rel-4 GERAN, UTRA-NTDD
  5. Rel-7 EGPRS2
  6. Rel-8 E-UTRA
  7. Rel-13 EC-GSM-IoT, LTE-M, NB-IoT
  8. Rel-15 NR
  9. Rel-17 NR RedCap
  10. Rel-18 NR eRedCap

Members and relations were proposed independently by several models and kept only where at least two agree; quotes are verified verbatim against the specifications. Release = first approved version of the defining specification.

Release Timeline

Detected Changes Across Releases

verified against 3GPP sources

Documented changes in 4 releases, each verified against the text of 3GPP specifications or approved change requests and shown with the exact wording. The release timeline above shows the same releases. A release without an entry has no documented change for this term.

R99 introduced

Introduced in R99 (release dating of the term; no individual change cited).

Rel-10 specification text

Redirection to a UTRA-TDD frequency in the case of high-priority CSFB was clarified in the RRC specification.

  • “Clarification on the redirection to UTRA-TDD frequency in case of CSFB High Priority” TS 36.331 v10.22.0
Rel-11 1 CR

RRC redirection to a UTRA-TDD frequency in case of high-priority CSFB was clarified in TS 36.331.

  • Clarification on the redirection to UTRA-TDD frequency in case of CSFB High Priority TS 36.331CR1267
Rel-12 specification text

Rel-12 RRC (36331) adds UTRA-TDD-conditional fields, including an extended UTRA-TDD carrier frequency list (carrierFreqListUTRA-TDD-Ext-r12) and CarrierFreqInfoUTRA-v1250, extending UTRA-TDD carrier signalling.

  • “carrierFreqListUTRA-TDD-Ext-r12 CarrierFreqListUTRA-TDD-Ext-r12 OPTIONAL -- Cond UTRA-TDD” TS 36.331 v12.20.0
  • “CarrierFreqInfoUTRA-v1250 OPTIONAL, -- Cond UTRA-TDD” TS 36.331 v12.20.0

Defining Specifications

3GPP specifications that define or reference UTRA-TDD, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TR 21.905 vj20 3GPP Terminology and Definitions Rel-19 read