Description
Mobile IAB-MT type 1-O is a conformance requirement category for the Mobile Termination function of a Mobile Integrated Access and Backhaul (IAB) node, defined in 3GPP TS 38.174, TS 38.175, and TS 38.176. IAB allows a 5G NR node to serve UEs on access links while backhauling traffic wirelessly to a parent node, eliminating the need for dedicated fiber at every site. A Mobile IAB node can move, extending coverage to vehicles, trains, or temporary deployments. The IAB-MT is the component that communicates upstream with the parent node, functioning much like a UE's modem.
The 'type 1-O' designation means the requirement set consists only of OTA (Over-The-Air) requirements defined at the RIB (Radiated Interface Boundary). This applies to devices that have no antenna connectors suitable for conducted measurement — typically because the antenna array is fully integrated with the RF circuitry. All RF and performance parameters must therefore be verified through radiated testing in an anechoic chamber or compact antenna test range. This is the most challenging but also the most realistic form of testing, as it captures the actual radiated behavior of the complete device.
Operating at FR1 (sub-7 GHz), the Mobile IAB-MT type 1-O must satisfy requirements for output power, frequency stability, EVM, unwanted emissions, blocking, and receiver sensitivity, all measured at the RIB. The specifications TS 38.174 (IAB RF requirements), TS 38.175 (IAB conformance testing), and TS 38.176 provide the normative framework. Because the device is mobile, testing must also consider how movement affects radiation patterns and link performance, though conformance testing itself is performed under static conditions.
The type 1-O classification is important for test houses and vendors because it dictates a fully OTA test campaign, which requires calibrated chambers, precise positioning, and careful uncertainty budgeting. It also reflects the industry trend toward highly integrated antenna systems (AAS) where conducted access is impossible. For mobile IAB, this integration is common because compact, ruggedized relay units favor sealed, connectorless designs.
Engineers use this term to select the correct test methodology and to interpret declarations of conformity. It ensures that mobile relay equipment meets the same rigorous RF standards as other 5G equipment, preserving network performance and regulatory compliance.
Purpose & Motivation
The Mobile IAB-MT type 1-O category exists to standardize conformance testing for mobile IAB relay equipment whose antennas are fully integrated and cannot be tested via conducted connections. As 5G hardware becomes more compact and integrated — especially for mobile and vehicular deployments — antenna connectors are often eliminated to reduce size, cost, and RF loss. This creates a testing gap: traditional conducted measurements are impossible.
3GPP addressed this by defining OTA-only requirement types, of which type 1-O is the purest form. It ensures that such devices can still be rigorously validated against RF performance standards, using radiated measurements at the RIB. This maintains a level playing field across vendors and supports global market access, since regulators increasingly accept OTA conformance as evidence of compliance.
The category also reflects the maturation of OTA test methodologies and chamber technology, which have advanced enough to make fully radiated testing practical and repeatable. By codifying type 1-O, 3GPP enables the mobile IAB ecosystem to innovate in hardware design without compromising on verifiable performance.
Release Timeline
Evolution Across Releases
An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.
Defining Specifications
3GPP specifications that define or reference Mobile IAB-MT type 1-O, with the latest known release. Sourced from the 3GPP document catalog — see methodology.
| Specification | Title | Release |
|---|---|---|
| TS 38.174 vk00 | NR Integrated Access and Backhaul Requirements | Rel-20 read |
| TS 38.175 vj00 | EMC for NR IAB Nodes | Rel-19 read |
| TS 38.176 vj40 | IAB Conformance Testing | Rel-19 read |