Menu
Latest
12 meetings · Prague, Jeju · 12–16 Oct
Reports
RAN1#126-bis · SA2#177

Glossary term · Radio Access Network

Mobile IAB type 1-H

Mobile Integrated Access and Backhaul type 1-H

Radio Access Network →

Mobile IAB type 1-H is a Mobile IAB-MT operating at FR1 whose requirement set combines conducted requirements at individual TAB connectors with OTA requirements at the RIB, defining how mobile relay nodes are conformance-tested for 5G coverage extension.

Introduced
Rel-18
Where
Radio Access Network › NG-RAN (5G)
Specifications
2 specs
Mobile IAB type 1-H Description Purpose Neighbours Specifications

Description

Mobile IAB type 1-H is a conformance requirement category for the Mobile Integrated Access and Backhaul (IAB) node's Mobile Termination (MT) function, defined in 3GPP TS 38.175 and TS 38.176. IAB is a 5G NR feature that enables a node to provide both access links to User Equipment (UE) and backhaul links to the network over the radio interface, avoiding the need for a dedicated fiber backhaul. A Mobile IAB node is one that can move — for example, mounted on a vehicle or train — extending coverage dynamically. The IAB node comprises an IAB-DU (Distributed Unit) that serves UEs and an IAB-MT that connects to a parent node, behaving like a UE toward the upstream network.

The 'type 1-H' designation follows the established 3GPP convention for radio requirement types. Type 1-H indicates a hybrid requirement set: some requirements are 'conducted,' meaning they are defined at the physical antenna connectors (TAB connectors) of the device and measured via conducted testing, while others are 'OTA' (Over-The-Air), defined at the Radiated Interface Boundary (RIB) and measured through radiated testing. This hybrid approach is used when a device has antenna connectors that permit conducted measurement for certain parameters, but other parameters (such as those involving the full antenna array) must be assessed over the air.

In the context of Mobile IAB, the MT function operates at FR1 (Frequency Range 1, the sub-7 GHz range). The requirement set for type 1-H specifies which RF and performance parameters are verified at the TAB connectors and which at the RIB. This matters for test laboratories and equipment vendors because it determines the test setup, calibration approach, and measurement methodology. Conducted tests are generally more repeatable and easier to perform, while OTA tests capture the real radiated behavior of the integrated antenna system.

The specifications TS 38.175 (IAB conformance testing) and TS 38.176 (IAB RF requirements) define these requirement sets. The Mobile IAB-MT must meet requirements for output power, frequency error, EVM, unwanted emissions, and receiver characteristics, with the type 1-H classification determining the applicable test points. Because Mobile IAB nodes move, additional considerations such as Doppler, mobility-induced channel variation, and backhaul link adaptation come into play, making robust RF conformance essential.

Understanding the type 1-H classification helps engineers interpret conformance test reports, design test plans, and ensure that mobile relay equipment interoperates correctly with parent nodes and the broader 5G network. It is a precise, standards-defined label that bridges RF physics and regulatory/industry testing practice.

Purpose & Motivation

The Mobile IAB type 1-H requirement category exists to provide an unambiguous, standardized basis for conformance testing of mobile IAB nodes at FR1. As 5G networks seek to extend coverage cost-effectively — particularly for moving platforms like buses, trains, and temporary events — mobile relays become attractive. However, integrating a relay's antenna arrays and RF chains creates testing challenges: some parameters can be measured at antenna connectors, while others only make sense when radiated from the full antenna system.

Historically, 3GPP defined requirement types (1-C, 1-H, 1-O) to handle exactly this situation for base stations and other radio equipment. Type 1-H was created for equipment where a mix of conducted and OTA testing is appropriate. Applying this framework to Mobile IAB-MT ensures that mobile relay equipment is tested consistently across vendors and regions, supporting global interoperability and regulatory acceptance.

The category also addresses the limitation of purely conducted testing, which cannot capture integrated antenna behavior, and purely OTA testing, which can be more complex and less repeatable. By specifying a hybrid set, the standard balances practicality with accuracy, enabling the mobile IAB ecosystem to scale.

Release Timeline

Evolution Across Releases

An overview written from the defining specifications, not a verified change history. For the exact text, open the specifications listed below.

Rel-18 Initial

Initial definition introduced: Mobile IAB-MT operating at FR1 with a requirement set consisting of conducted requirements defined at individual TAB connectors and OTA requirements defined at RIB. This established the hybrid conformance testing framework for mobile IAB relays.

Definition text carried over unchanged from Rel-18; no revision to the requirement set description.

Definition text carried over unchanged; the type 1-H classification remained stable.

Defining Specifications

3GPP specifications that define or reference Mobile IAB type 1-H, with the latest known release. Sourced from the 3GPP document catalog — see methodology.

SpecificationTitleRelease
TS 38.175 vj00 EMC for NR IAB Nodes Rel-19 read
TS 38.176 vj40 IAB Conformance Testing Rel-19 read